A new noninvasive method of measuring the structure and the electrical properties of bilayered biological tissues was evaluated as a potentially useful diagnostic means for detecting changes in subcutaneous tissues. First, the input impedance of an open-ended coaxial probe radiating into a bilayered model was calculated using a full-wave method, the results showed that the evanescen higher order modes do not have a significant influence on the reflection coefficient of muscle layer surface. Then, it was clearly proven that the phase shift and the modulus of the reflection coefficient of muscle layer surface depending on the frequency are useful to estimate the thickness of fat layer and the electrical properties of muscle respectively. The experimental results showed an excellent agreement with the theoretical relationship between the phase shift and the thickness. The sensitivity of estimation of the electrical properties of muscle was shown to be not enough for differentiating between normal and diseased deep tissue because of noises from the experimental systems. 相似文献
A series of poly(ether ester)s containing different H‐bonding units (amide, carbamate, urea) was prepared by polycondensation in bulk, using Ti(OBu)4 as a catalyst. The copolymers were obtained starting from PEG1000, 1,4‐butanediol, and a symmetrical, bis‐ester terminated monomer carrying H‐bonding units. These materials were designed for biomedical applications, in which ultimate biodegradability of the materials is required. The influence of the nature of the H‐bonding unit and of the length of the methylene spacer between H‐bonding groups on the thermal and solubility properties of copolymers was investigated. Amide containing copolymers were more thermally stable than ones containing carbamate, consistent with the observed behavior of the corresponding monomers. In most cases, differential scanning calorimetry (DSC) traces were quite complex because of phase separation and dependent on the applied cooling rate. Copolymers containing urea bonds were less soluble in most organic solvents, but their thermal properties were not significantly different than their amide containing counterparts.
Summary: Light‐induced reversible changes in elasticity of semi‐interpenetrating network (semi‐IPN) films bearing azobenzene moieties were achieved under both ultraviolet (UV) and visible light irradiation. The semi‐IPN film was prepared by a cationic copolymerization of azobenzene‐containing vinyl ethers in a linear polycarbonate (PC) film as a matrix. When the irradiation was switched on and off, the semi‐IPN film showed rapid reversible deformation with the same behavior occurring over a range of wavelengths, including both the UV and visible regions. The observed reversible deformation of the film was attributed to the decrease in the film's elasticity, which was assumed to be caused by the frequent trans‐cis cycling isomerization of azobenzene moieties taking place during the UV and visible light irradiation. This cycling makes it difficult for the azobenzene groups to aggregate, thus hindering their ability to function as pseudo‐crosslinking points.
An unsymmetrical diamine monomer 4‐(p‐aminophenoxy)‐3‐trifluoromethyl‐4′‐aminobiphenyl has been synthesized successfully. This monomer leads to the synthesis of different novel poly(ether imide)s when reacted with different dianhydrides like pyromellatic dianhydride (PMDA), benzophenone tetracarboxylic acid dianhydride (BTDA), 2,2‐bis(3,4‐dicarboxyphenyl) hexafluoropropane (6FDA), and oxy diphthalic anhydride (ODA). The poly(ether imide) prepared from this monomer on reaction with 6FDA is soluble in several organic solvents such as N‐methylpyrolidinone (NMP), dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), tetrahydrofuran (THF), and CHCl3. The poly(ether imide)s prepared from BTDA and ODA are soluble in NMP, DMF, and DMAc but not in THF or CHCl3, whereas the polymer prepared from PMDA is soluble only in NMP. The water uptake value for these poly(ether imide) films is very low (0.2–0.5%), and exhibited low dielectric constants (2.81 at 1 MHz). The polymers exhibited high thermal stability up to 532 °C in air for 5% weight loss, and high glass transition temperatures up to 288 °C. The polymer exhibited high tensile strength up to 135 MPa, modulus 3.2 GPa, and elongation at break up to 25%, depending on the exact polymer structure.
The structure of the poly(ether imide) synthesised from 4‐(p‐aminophenoxy)‐3‐trifluoromethyl‐4′‐aminobiphenyl and 2,2‐bis(3,4‐dicarboxyphenyl) hexafluoropropane. This polymer was soluble in many organic solvents. 相似文献
ObjectiveData on prognostic tools for indicating mechanical ventilation in older people with COVID-19 are still limited. The aim of this research was to evaluate if the Multidimensional Prognostic Index (MPI), based on the Comprehensive Geriatric Assessment (CGA), may help physicians in identifying older hospitalized patients affected by COVID-19 who might benefit from mechanical ventilation.DesignLongitudinal, multicenter study.Settings and Participants502 older people hospitalized for COVID-19 in 10 European hospitals.MethodsMPI was calculated using 8 different domains typical of the CGA. A propensity score, Cox's regression analysis was used for assessing the impact of mechanical ventilation on rehospitalization/mortality for 90 days' follow-up, stratified by MPI = 0.50. The accuracy of MPI in predicting negative outcomes (ie, rehospitalization/mortality) was assessed using the area under the curve (AUC), and the discrimination with several indexes like the Net Reclassification Improvement (NRI) and the Integrated Discrimination Improvement (IDI).ResultsAmong 502 older people hospitalized for COVID-19 (mean age: 80 years), 152 were treated with mechanical ventilation. In the propensity score analysis, during the 90-day follow-up period, there were 44 rehospitalizations and 95 deaths. Mechanical ventilation in patients with MPI values ≥ 0.50, indicating frailer participants, was associated with a higher risk of rehospitalization/mortality (hazard ratio 1.56, 95% CI 1.09-2.23), whereas in participants with MPI values < 0.50 this association was not significant. The accuracy of the model including age, sex, respiratory parameters, and MPI was good (AUC = 0.783) as confirmed by an NRI of 0.2756 (P < .001) and an IDI of 0.1858 (P < .001), suggesting a good discrimination of the model in predicting negative outcomes.Conclusions and ImplicationsMPI could be useful for better individualizing older people hospitalized by COVID-19 who could benefit from mechanical ventilation. 相似文献