玻璃纤维增强复合树脂在总义齿基托中的应用

目的：增强总义齿基托的机械性能，提高总义齿的基托抗折裂能力。方法：对E－玻璃纤维用KH－550处理剂进行表面处理后，加入总义齿基托中，制成玻璃纤维增强复合树脂。结果：经过1年的临床观察后复诊，没有发现裂纹。结论：玻璃纤维增强得合树脂可以有效地增强总义齿基托的机械性能。     

Damage mechanics and load failure of fiber-reinforced composite fixed partial dentures

OBJECTIVES: Damage mechanics has been defined as the study of the initiation (initial failure) and accumulation of damage to and including rupture (final failure). This study was designed to evaluate the effect of increasing fiber-reinforced composite (FRC) substructure within a standardized fixed partial denture (FPD) model on the failure performance, in terms of damage mechanics. METHODS: The two FRC restorative systems, Targis/Vectris (TV) (Ivoclar Vivadent) and EverStick (ES) (Stick Tech with Gradia, GC Corp.), were used to restore the molar FPD model (1.5 mm axial and 2.0 mm occlusal reduction). Templates were used to standardize substructure designs with 0, 18, 43, and 66% cross-sectional FRC volume fraction (V(FRC)) of fiber substructure. Specimens (n = 5) were homogenized at 29 points and stored for 1 week at 37 degrees C in distilled water. Specimens were luted with calcium hydroxide, then statically loaded until failure. Initial failure (IF), final failure (FF) and the mode of failure were recorded. RESULTS: The lowest mean load to initial failure was 530 N (TV 18%) and the highest was 1208 N (ES 66%). Linear regression analysis calculated the Pearson's correlation coefficient (r) for the interactions between V(FRC) and IF (ES: r = 0.7879, TV: r = 0.6184), V(FRC) and FF (ES: r = 0.912, TV: r = 0.8152), and between IF and FF (ES: r = 0.892, TV: r = 0.7237). Unreinforced specimens universally fractured instantaneously. SIGNIFICANCE: The highest loads to initial and final failure were yielded by specimens with the highest cross-sectional V(FRC).     

义齿用Ti-6Al-7Nb合金铸件挠度的研究

目的：通过对相同长度、宽度、不同厚度的Ti-6Al-7Nb合金铸件挠度的测量,观察铸件厚度与挠度的关系,为确定Ti-6Al-7Nb合金铸造义齿基托的适合厚度提供实验依据。方法：参照ISO关于义齿基托材料挠度的标准,测量不同厚度Ti-6Al-7Nb合金铸件的挠度,并与纯钛、Ti-6Al-4V合金及Co-Cr合金对比。结果：Ti-6Al-7Nb合金、纯钛及Ti-6Al-4V合金铸件的厚度在0.65mm时可以达到义齿基托挠度的标准;Co-Cr合金在0.57mm时可达到标准要求。结论：在临床制作Ti-6Al-7Nb合金义齿基托时,厚度应不低于0.65mm。     

Pharmacology of KB‐R7943: A Na+–Ca2+ exchange inhibitor

The Na⁺–Ca²⁺ exchange (NCX) system plays a pivotal role in regulating intracellular Ca²⁺ concentration in cardiomyocytes, neuronal cells, kidney and a variety of other cells. It performs a particularly important function in regulating cardiac contractility and electrical activity. One of the leading NCX inhibitors is KB‐R9743 (KBR) that appears to exhibit selectivity for Ca²⁺‐influx‐mode NCX activity (reverse mode of NCX). In this article we reviewed pharmacology of KBR and provide a brief summary of studies with other NCX inhibitors, such as SEA0400 (SEA) and SN‐6 (SN). Potential clinical usefulness of KBR and other NCX inhibitors is still controversial but the reviewed findings may be helpful in designing more selective and clinically useful NCX inhibitors for the treatment of cardiac, neuronal and kidney diseases.     

Sympathetic skin response and R–R interval variation in chronic uremic patients

Sympathetic skin response (SSR) and R–R interval variation (RRIV) were studied in 36 chronic, nondiabetic uremics to compare with their nerve conduction studies (NCS) and clinical dysautonomia. Abnormal SSR was noted in 5 (13.9%) patients, abnormal RRIV in 14 (38.9%), and abnormal NCS in 26 (72.2%). The patients were classified into three groups: group (GP) 1: “normal,” n = 21 (58.3%), normal RRIV and SSR; GP 2: “isolated parasympathetic dysfunction,” n = 10 (27.8%), abnormal RRIV and normal SSR; and GP 3: “sympathetic sudomotor dysfunction,” n = 5 (13.9%), abnormal SSR. A significant difference in age was found among the three groups (GP 3 > GP 2 > GP 1; P < 0.0001, ANOVA). After controlling the age factor, we still noted a tendency toward increasing NCS disturbances (distal latency and nerve conduction velocity of peroneal nerve; P < 0.05, multiple regression analysis) and frequencies of clinical autonomic symptoms (postural dizziness and impotence; P < 0.05, Mantel–Hanszel test) from GP 1 to GP 3. Patients with abnormal SSR (GP 3) displayed significantly higher frequencies of postural dizziness and impotence, indicating the relationship between an absence of SSR and clinical dysautonomia. © 1994 John Wiley & Sons, Inc.     

P物质及其受体在慢性胰腺炎组织的表达和临床意义

目的 了解P物质及其受体NK－1R在正常胰腺和慢性胰腺炎中的表达，探讨它们与慢性胰腺炎时疼痛发生的关系。方法 25个慢性胰腺炎标本取自慢性胰腺炎手术，男性18例，女性7例，正常胰腺组织取自20个器官捐献者，男性11例，女性9例。应用实时定量逆转录整合酶链反应（RT－PCR）技术，检测正常胰腺和慢性胰腺炎组织中P物质和NK－1R的mRNA水平，应用Western blot技术检测NK－1R的蛋白水平，应用免疫组织化学方法进行NK－1R的组织学定位。将P物质及其受体NK－1R mRNA水平与疼痛的程度，发作频率和病程进行分析，寻找其中的相关性。结果 与正常胰腺相比，慢性胰腺炎组织中P物质和NK－1R mRNA和蛋白都过度表达，NK－1RmRNA水平与疼痛的程度，发作频率和病程明显相关。免疫组化检查显示，NK－1R的表达主要位于胰腺腺泡，胰腺导管，神经纤维和炎性细胞。结论 慢性胰腺炎组织中P物质和NK－1R的表达水平都明显上调，扰乱了神经激肽的作用环节，NK－1R的过度表达与疼痛发生有关。     

肾宁口服液对兔膜性肾病模型肾保护作用的实验研究

目的观察肾宁口服液治疗膜性肾病的实验研究.方法用阳离子牛血清白蛋白(C-BSA)制备家免膜性肾病模型,设立正常对照组、中药治疗组、激素治疗组和模型组.每周测定一次24h尿蛋白,实验结束时测定血浆白蛋白、血脂和肾功能等生化指标.结果肾宁口服液中药治疗组的24h尿蛋白、血脂和肾功能等生化指标较模型组明显改善(P＜0.01或P＜0.05),而激素治疗组与模型组比较无明显差异(P＞0.05).结论肾宁口服液能降低尿蛋白,提高血浆白蛋白,改善肾功能,对膜性肾病有显著疗效.     

In Vitro Wear of Nano-Composite Denture Teeth

PURPOSE: Few laboratory tests have been able to substantiate and quantify the wear resistances of polymeric denture teeth. This study evaluated the relative wear resistance of several types of denture teeth using an in vitro wear testing device. MATERIAL AND METHODS: Four different types of denture teeth [nano-filled (Veracia) and micro-filled composites (SR-Orthosit, Endura, Duradent, Surpass), cross-linked acrylic (SR-Postaris, Genios-P, Creapearl, Vitapan Physiodens, Premium 8, Integral), and a conventional acrylic (Biotone)] were used. The flattened buccal surface of each denture tooth was subjected to the evaluation of Knoop hardness (n=5) and localized wear for 100,000 cycles (n=10). Wear values were determined in micrometers using a profilometer. The data for the hardness, wear depth, and worn surface areas were individually analyzed by one-way ANOVA. RESULTS: Knoop hardness values (KHN) ranged from 28.2 to 29.8 for micro-filled composite, 18.9 to 21.6 for cross-linked acrylic, 22.7 for nano-composite, and 18.6 for conventional acrylic teeth. All micro-filled composite teeth were significantly harder than other teeth (p <0.0001). The wear depth values were 90.5 microm for the nano-composite, 69.8 to 93.0 microm for the micro-filled composite, 80.8 to 104.0 microm for the cross-linked acrylic, and 162.5 microm for conventional acrylic teeth. The worn surface areas were 5.1 mm2 for the nano-composite, 2.6 to 3.6 mm2 for the micro-filled composite, 4.4 to 5.7 mm2 for the cross-linked acrylic, and 10.1 mm2 for conventional acrylic teeth. The wear values of the acrylic control were significantly different from all other denture teeth (p <0.001). CONCLUSION: The nano-composite tooth was harder and more wear resistant than the acrylic teeth but not significantly different from most of the cross-linked and micro-filled composite teeth tested.