The effect of curing with plasma light on the shrinkage of dental restorative materials

Commercially available light activated dental composites were used in this study to compare the shrinkage following curing with plasma light (Apollo95E, DMDS) and a convention halogen dental curing light (Prismetics Lite II, Dentsply). Polymerization shrinkage was determined by measuring the strain in one dimension by means of a contacting transducer. The percentage linear shrinkage were: Spectrum H = 1.84 + 0.31, P = 1.49 + 0.35*; Ana aesthetic H = 2.04 + 0.38, P = 1.85 + 0.27; Esthet.x H = 1.66 + 0.28, P = 1.69 + 0.25; Dyract AP H = 2.39 + 0.33, P = 2.18 + 0.35*; Apollo Restore H = 1.88 + 0.36, P = 1.42 + 0.33*; Surefil H = 0.88 + 0.28, P = 0.99 + 0.30 where * = significantly different, t-test at P < 0.05. The results suggested that there was less shrinkage when curing some, but not all, materials using the plasma light, although this could be attributed to a reduced level of polymerization.     

Clinical evaluation of class II Targis inlays: preliminary results after 1 year

The aim of this study was to evaluate the clinical performance of a new generation of restorative resin, Targis (Vivadent), in class II inlay restorations. Forty class II Targis inlays were placed (18 premolars, 22 molars) in 26 patients (mean age=25.5). All test teeth were vital. All restorations were in occlusion and were placed adhesively using Variolink II high viscosity (Vivadent) in combination with Syntac adhesive system under rubber-dam by the same operator. The restorations were evaluated at baseline and after 6 months and 1 year, according to modified United States Public Health Service (USPHS) criteria by two examiners. The parameters evaluated were: anatomical form, marginal adaptation, marginal discoloration, colour match, surface finish, gingival index and secondary caries. Post-operative sensitivity was determined by direct questioning. Regarding all of the clinical evaluation criteria all 40 inlays exhibited clinically acceptable scores after 1-year evaluation period. Relying on these early 1-year results, the new restorative material (Targis) seems to be promising in class II inlays.     

Diffusion of resin monomers through human carious dentin in vitro

Abstract The diffusion of 2-hydroxyethylmediacrylate (HEMA) and triethylene glycol dimethacrylate (TEGDMA) from light cured bonding resin-composite resin restorations through human carious dentin was investigated. Extracted human molar teeth with different degrees of caries were obtained from consenting donors. Teeth were classified into three groups according to caries severity (mild, moderate and severe) using subjective criteria. The outer carious lesions were then removed guided by a proprietary caries detector dye. Teeth with exposure of the pulp space after caries removal were excluded from the study. A polypropylene chamber was attached to the cemento-enamel junction of each tooth to contain 1 ml distilled water. Each cavity was restored with a HEMA containing bonding resin then a TEGDMA-containing resin composite. Water samples were retrieved over a lime course and analyzed by high performance liquid chromatography. There was great variation between teeth in HEMA and TEGDMA permeability. The cumulative amounts released were of similar magnitude to those observed in non-carious teeth for the mild and moderately-severe groups. However, the cumulative amounts released were markedly greater in severely carious teeth than in those with moderate or mild caries.     

多功能粘结剂和复合树脂修复牙体缺损86例观察

本文将多功能粘结剂和复合树脂应用于86例牙体缺损的修复并进行术后两年的随访复查,成功率达92.3％,依据病损的不同类型统计学上有显著差异。     

The effect of the addition of surface treated chopped and continuous poly (methyl methacrylate) fibres on some properties of acrylic resin

Poly (methyl methacrylate), the material most commonly used in the construction of dentures, is not without limitations particularly in terms of mechanical strength, such as flexural and fatigue strength. The Dental Practice Board for England statistics show that many dentures fail as a result of fracture. This study investigated the self-reinforcement of acrylic resin through the addition of surface treated poly (methyl methacrylate) fibres in chopped and continuous form. The effect of the addition of fibres on transverse and impact strengths was investigated. The addition of surface treated chopped or continuous fibres to acrylic resin did not improve the transverse or impact strengths. The addition of surface treated poly (methyl methacrylate), in the present form, to acrylic resin cannot be recommended as a method of reinforcement.     

三种丙烯酸树脂牙和丙烯酸牙托粉的结合强度实验研究

为了探求人造牙从基托上脱落下来的原因,本文作者对三种丙烯酸树脂牙和三种丙烯酸牙托粉的拉伸结合强度和剪切结合强度进行了测试,结果表明,材料和不同品牌材料的匹配都会影响人造牙与基托的结合强度;塑料牙盖嵴面打磨粗糙后,可显著增强塑料牙与基托树脂的结合强度。     

Comparative study on the shaping ability and cleaning efficiency of rotary Mtwo instruments. Part 1. Shaping ability in simulated curved canals

AIM: To compare the shaping ability of Mtwo instruments with K3 and RaCe instruments. Part 1 of this two-part report describes the efficacy of these nickel-titanium instruments in simulated curved root canals. METHODOLOGY: Simulated canals with 28 degree and 35 degree curves in resin blocks were prepared with Mtwo instruments using a single length technique and with K3 and RaCe instruments using a crowndown preparation technique (n = 20 canals in each case). Pre- and post-instrumentation images were recorded and assessment of canal shape was completed with a computer image analysis program. Material removal was measured at 20 measuring points, beginning 1 mm from the endpoint of preparation. Incidence of canal aberrations, preparation time, changes of working length and instrument failures were also recorded. The data were analysed statistically using ANOVA and Student-Newman-Keuls test. RESULTS: On an average, canals prepared with Mtwo instruments remained better centred compared with those enlarged with K3 or RaCe instruments. Six RaCe instruments, four K3 files and none of the Mtwo instruments fractured during preparation (P > 0.05). In both of the canal types, Mtwo was significantly faster (P < 0.001). It was possible with all types of instruments to control working length as well. CONCLUSIONS: Mtwo instruments prepared curved canals rapidly, respected original canal curvature well and were safe to use.     

An investigation of the composite resin/porcelain interface.

Failures at composite resin/porcelain interfaces under shear-like loading were examined. Porcelain surfaces were treated with hydrofluoric acid and/or one of two silane coupling agents, using two different composite resin cements. The results showed that after seven days storage, bond strengths of specimens which had undergone porcelain surface treatment were greater than the cohesive strength of the porcelain itself, resulting in brittle fracture of the porcelain. The diluted restorative composite resin performed as well as the commercial composite resin cement. Silane pretreatment of porcelain was important as the bond strength of etched/silane primed specimens was significantly higher than the etched only specimens. However, one primer appeared to be more efficient than the other in bond promotion. Some explanations for the differences in bond strengths are offered.     

The Effect of Brushing on Surface Roughness of Denture Lining Materials

PURPOSE: The purpose of this study was to test the effect of brushing on surface roughness of two resilient liners (Luci Sof and Sofreliner) compared with an acrylic resin (QC 20). MATERIALS AND METHODS: Twenty specimens of each material were prepared (25 mm x 14 mm x 3 mm). Ten specimens served as controls and were stored in distilled water and not brushed. The remaining ten specimens were subjected to mechanical brushing, using an MSEt plus machine to simulate brushing at a rate of 5.0 strokes per second (30,000 cycles). Surface roughness measurements were recorded before and after brushing. Random samples were analyzed using scanning electron microscope. Data collected were analyzed by a two-way analysis of variance using material and treatment as variables, followed by Tukey's test (alpha= 0.05). RESULTS: Initial surface roughness of materials indicated that QC 20 was the smoothest (0.13 microm), and Luci Sof the roughest (0.68 mum). Sofreliner had an intermediate value (0.31 microm). All materials were significantly different. Mechanical brushing significantly increased surface roughness in all the materials. Although there was no statistical difference between QC 20 and Luci Sof after mechanical brushing (0.88 and 1.00 microm, respectively), both differed significantly from Sofreliner (7.74 microm). CONCLUSION: The two resilient liners and the acrylic resin became rougher, to a greater or lesser extent, when subjected to mechanical brushing.     

Surface characteristics of aesthetic restorative materials - an SEM study

To determine the degree of surface roughness of glass-ionomer cements (GICs) and polyacid-modified resin composite (PAMRC) after polishing and immersion in various foodstuffs. Three tooth-coloured restorative materials were used: a PAMRC (F2000), a conventional glass-ionomer cement (CGIC) (Fuji IX) and a resin-modified glass-ionomer cements (RM-GIC) (Fuji II LC). Disk-shaped specimens were prepared and tested with either a plastics matrix finish or after polishing with wet silicon carbide papers up to 2000-grit. All specimens were immersed in 37 degrees C-distilled water for 1 week, followed by three different foodstuffs (red wine, coffee or tea) for a further 2 weeks. Replicas of specimens were prepared by taking polyvinyl siloxane impressions, casting in epoxy resin, gold sputter-coating and examining using a Field-Emission Scanning Electron Microscope. The polished and matrix finish specimens of F2000 showed many microcracks at low magnification, and eroded surfaces with missing and protruding particles at high magnification in the polished specimens. The surface-polished specimens of Fuji II LC were considerably rougher than the matrix-finish specimens, with large voids and protruding filler particles. The effects of foodstuffs on Fuji II LC and F2000 were not noticeable. The CGIC became noticeably rougher after exposure to coffee and tea. All specimens had the smoothest surface when they were cured against a plastics matrix strip, and all materials had a rougher surface after polishing. None of the foodstuffs produced a perceptible increase in roughness on RM-GIC and PAMRC surfaces, whereas coffee and tea markedly increased the surface roughness of Fuji IX.