Regulatory effects of biophysical strain on rat TMJ discs

Recent studies have revealed that dynamic biomechanical forces can exert antiinflammatory and antiproteolytic effects on fibrocartitage. Whether the effects of mechanical strain also involve stimulation of the insulin-like growth factor (IGF) system and, therefore, of growth and repair of fibrocartilage has yet to be determined. The objective of this in vitro study was to determine if continuous biophysical strain regulates the gene expression of IGF1, IGF2, IGF1 receptor (IGF1R), insulin receptor substrate (IRS1), and IGF-binding proteins (IGFBP) 3 and 5 in cells from the fibrocartilaginous disc of the temporomandibular joint (TMJ). Rat TMJ disc cells were subjected to continuous biophysical strain (3% and 20%) for 4 and 24 h. Subsequently, RNA was extracted and real-time PCR was performed using an iCycler iQ detection system to analyze the gene expression of the IGF system. The gene expression of IGF1, IGF2, IGF1R, IRS1, IGFBP3, and IGFBP5 was significantly (p < 0.05) inhibited when cells were subjected to continuous biophysical strain, as compared to control at both time points. High strain induced a stronger inhibition of these molecules as compared to strain of Low magnitude. In conclusion, continuous biophysical strain seems to downregulate the expression of the IGF system and may, therefore, reduce the potential of fibrocartilage for growth and repair.     

Subchondroplasty in the treatment of bone Marrow lesion in early Knee Osteoarthritis: A systematic review of clinical and radiological outcomes

BackgroundKnee osteoarthritis (KOA) is increasingly prevalent in North American society. The significant societal burden it represents makes it essential to promote and target new treatments in earlier phases of the disease. Among others, subchondroplasty is a newly documented technique using calcium phosphate injection targeting the osteochondral lesions preceding KOA, also known as Bone Marrow Lesions (BMLs). This article aimed to review the existing literature on clinical and radiological outcomes of subchondroplasty in the treatment of BMLs in KOA.MethodA systematic review was performed using PubMed, Embase, Medline and Cochrane Database of Systematic Reviews. Studies on calcium phosphate injections into BMLs for KOA and its clinical and radiological outcomes were screened and reviewed by independent evaluators.ResultsAfter screening, ten articles were included, totaling 540 patients. Follow-up ranged from 6 months to 7 years. Overall, the procedure showed significant functional and quality of life improvement, as well as pain relief, as shown by Patients-Reported Outcomes Measures (PROMs). There were very few complications reported, the most important being leakage of calcium phosphate outside the targeted site. Conversion rate to total knee arthroplasty (TKA) ranged from 14 % to 30 % at 2 years post-procedure. Long term radiological outcomes have been poorly documented.ConclusionsSubchondroplasty is a promising avenue for the treatment of KOA. However, quality evidence is still required before any real conclusions and practical management guidelines can be drawn. Prospective, randomized studies with a control group and a rigorous assessment of long-term clinical and radiological outcomes are recommended.     

CR-lipped bearing is an adequate functional solution to patients with perioperative excessive laxity in cruciate retaining total knee arthroplasty

BackgroundThe cruciate retaining lipped (CR-lipped) bearing is designed to provide more anterior-posterior (AP) stability and could be employed to resolve excessive intraoperative laxity during the cruciate retaining TKA (CR-TKA). The aim of the study was to determine whether the CR-lipped bearing in CR-TKAs with a perioperative excessive laxity allows equivalent functional results as compared to the standard CR articulation.MethodsA cohort of 111 TKAs with CR-lipped bearings was matched to a cohort of conventional CR bearings regarding age and sex. The CR-lipped bearing was used in patients with excessive knee AP laxity and the regular CR bearing was used in patients without excessive AP laxity during TKA. Various PROMs (WOMAC, KSS, SF-36) were assessed preoperatively and at 5-years postoperative in combination with revision rate and Range of Motion (ROM).ResultsPROMs did not differ significantly between both groups 5-years postoperatively. Mean ROM (flexion) 5-years postoperatively was not significantly different. The implant survivorship was 100% for both cohorts with revision for any reason as end point.ConclusionBased on these results, the CR-lipped bearing is a safe and effective solution for mild interoperatively assessed PCL laxity during CR-TKA without loss of function or decreased survivorship at 5 years. Peroperative conversion to a PS-TKA in order to obtain satisfactory functional scores might therefore not be necessary when mild PCL laxity is observed during surgery. Further research should focus on verifying this approach and longer follow-up is needed to generate data on long term survivorship.Level of evidenceLevel IV therapeutic, retrospective, cohort study.     

个性化截骨工具辅助下人工全膝关节置换与传统人工全膝关节置换手术精确度及临床疗效比较

目的比较3D打印个性化截骨工具辅助(patient-specific instrumentation,PSI)下人工全膝关节置换术(total knee arthroplasty,TKA)与传统TKA的手术精确度和临床疗效。方法自2017年9月至2018年12月,将40例拟接受初次膝关节置换患者随机分为2组,每组均为20人。一组应用个性化截骨工具辅助TKA手术(PSI组),另一组接受传统TKA(对照组)。比较两组患者的冠状面下肢机械轴线、手术时间、术中出血量、术后引流量以及HSS评分。结果对照组和PSI组的手术时间分别为(103.3±18.7) min和(91.3±15.7) min;术中出血量分别为(372.0±53.0)mL和(332.8±47.0)mL;术后引流量分别为(378.8±97.2)mL和(315.0±89.0)mL。两组手术时间、术中出血量、术后引流量比较差异均有统计学意义(P0.05)。对照组和PSI组术后2周HSS评分分别为(89.3±2.8)分和(88.7±2.9)分,两组比较差异无统计学意义(P0.05)。对照组和PSI组术后全下肢力线差值分别为(1.9±1.1)°和(1.2±1.0)°,冠状面股骨假体角度(frontal femoral component angle,FFC)差值分别为(2.1±1.1)°和(1.1±0.9)°,两组比较差异有统计学意义(P0.05)。冠状面胫骨假体角度(frontal tibia component angle,FTC)差值分别为(1.3±0.8)°和(1.4±0.8)°,两组比较差异无统计学意义(P0.05)。结论PSI辅助TKA较传统TKA手术时间更短、术中出血量更少,并且术后冠状面全下肢力线及股骨力线的改善优于传统TKA手术。     

Anatomic basis of the transgluteal approach to the hip-joint by anterior hemimyotomy of the gluteus medius

The authors present a study of the intrinsic anatomy of the gluteus medius m. and of its innervation through the caudal branch of the superior gluteal n. The existence of an intramuscular tendon in the thickness of the gluteus medius was constantly prooved in 40 muscles. The relations of the intrinsic fibrous structure of the muscle and its innervation were studied. The authors deduce from that the topography of a gluteus medius incision, with respect to a safety area towards its innervation, which leads to an exposure of the acetabulum that is satisfying and gives opportunities of a sound repair after the surgery of the hip joint through the transgluteal approach. They propose the anterior hemimyotomy of the gluteus medius m designation.

---

Bases anatomiques de l'abord transglutéal de la hanche par hémimyotomie antérieure du muscle moyen fessier

Résumé Les auteurs présentent une étude de l'anatomie intrinsèque du m. moyen fessier (MF) et de son innervation par le rameau caudal du n. glutéal supérieur (NGS). 40 muscles ont été étudiés. L'existence d'une lame tendineuse dans l'épaisseur du MF a été constamment mise en évidence. Les rapports entre les éléments de l'architecture fibreuse intrinsèque du muscle et son innervation ont été étudiés. Les auteurs en déduisent la topographie d'une incision du MF respectant une zone de sécurité vis à vis de son innervation, procurant une exposition acétabulaire satisfaisante et des possibilités de réparation solide après chirurgie de l'articulation coxo-fémorale par voie d'abord transglutéale, et proposent la dénomination hémimyotomie antérieure du MF.

     

Correlation of MRT imaging with real-time axiography of TMJ clicks

There is a series of tools useful for gathering diagnostic information on patients with temporomandibular joint disorders. Tracings of the joint movement (axiography) provide useful information about the motion of the joints. Since the availability of electronic axiographic tracers, the movement of the condyles can be resolved with high resolution both in space and in time. In order to obtain information about the anatomical relation of the joint surfaces and the disc, magnetic resonance tomography imaging (MRI) is routinely carried out. It is common practice to take MR images of the joints with the mouth closed and fully open. In order to correlate the MR images with the axiographic tracings, a series of images can provide much more information. In this study we examined patients with distinct temporomandibular joint (TMJ) clicks. In one case, the click occurs once a day, while in the other case the click happens every time the mouth is opened. In order to obtain information about both motion and anatomical relation of the TMJ at and around the position where the clicks occur, we recorded a series of MRI scans with the mouth gradually opened and before and after joint clicks. Real-time axiographic tracings during the click were taken with an optimized system where the polar moments were reduced as much as possible to follow the movement during the click. These tracings were correlated with the MRI scans to determine the exact internal conditions of the TMJ and the changes during the click. In particular cases, the additional information provided by this procedure can be useful in deciding whether and which therapeutic intervention is advisable.     

The use of meniscal fibrocartilage as a surface arthroplasty to effect the repair of osteochondral defects: an experimental study

Meniscal fibrocartilage autografts, homografts, glutaraldehyde treated homografts and glutaraldehyde treated xenografts were inserted into articular defects in the rabbit patello-femoral groove. They appeared capable of restoring a functional articular surface. Considerable variation in the type of bond formed between the host and graft occurred but no evidence of rejection was observed. This tissue would appear to offer potential for restoring localized articular osteochondral defects.     

Clinical Potential of Digital Linear Tomosynthesis Imaging of Total Joint Arthroplasty

The present study was performed to evaluate the potential for clinical application of digital linear tomosynthesis in imaging hip prostheses. Volumetric x-ray digital linear tomosysnthesis was used to image hip prostheses. The tomosynthesis was compared to metal artifact reduction (MAR) computed tomography (CT), and non-MAR CT scans of a prosthesis case. The effectiveness of this method in enhancing visibility of a prosthesis case was quantified in terms of the signal-to-noise ratio (SNR), and removal of ghosting artifacts in a prosthesis case was quantified in terms of the artifact spread function (ASF). In the near in-focus plane, the contrast is greater in the MAR CT or tomosynthesis relative to the non-MAR CT. The order of ASF performance of the algorithm was as follows: (1) tomosynthesis; (2) MAR-CT; (3) non-MAR CT. The potential usefulness of digital linear tomosynthesis for evaluation of hip prostheses was demonstrated. Further studies are required to determine the ability of digital linear tomosynthesis to quantify the spatial relationships between the metallic components of these devices as well as to identify bony changes with diagnostic consequences.     

Improvements to a method for determining leg length following total hip arthroplasty

Abstract

Discrepancy in leg length does frequently occur as a side effect of total hip arthroplasty and may lead to reduced patient satisfaction as well as injury in the sequalae. It is consequently important to reduce leg length discrepancy where-ever technically possible. This may be achieved by recording precise intraoperative measurements and using different sized implanted components. The aim of the given study was to improve the accuracy of a previously validated optic measurement system (OMS) to reduce leg length discrepancy. This pre-existing OMS was first trialled and based on these preliminary findings developed further. Using this improved system, measurements were taken in models and cadavers. Inter observer reliability of the improved OMS was assessed. The system is introduced in the given technical feasibility study. Its accuracy was greater in the model setup (swivel joint: 772.7?±?1.5?mm; ball joint: 770.0?±?3.7?mm; reference: 772?mm) compared to the trial using cadaveric tissues (588.8?±?5.7?mm; reference: 586?mm). Results of two examiners were similar. The third one measured significantly shorter values (p=.011). The results of the measurements with the OMS indicate that a significant increase in accuracy (p?=?2.076×¹⁰?⁶) has been achieved compared to the previously reported system, however, a further improvement to measurement accuracy is necessary for this to be applied clinically.     

Techniques of exposure for the stiff total knee

Primary and revision total knee arthroplasty have become common orthopaedic procedures. The operating surgeon, at times, may be faced with a difficult surgical case due to soft tissue contractures or bone deformities. A review of multiple surgical techniques using soft tissue releases and osteotomies are presented including their potential complications. Although these techniques are aimed at the atypical operative case, the operating surgeon may utilize them for ‘routine’ exposures as well. Importance is focused on the functional integrity of the knee extensor mechanism.