Ia Afferent input alters the recruitment thresholds and firing rates of single human motor units

Vibration of the patellar tendon recruits motor units in the knee extensors via excitation of muscle spindles and subsequent Ia afferent input to the α-motoneuron pool. Our first purpose was to determine if the recruitment threshold and firing rate of the same motor unit differed when recruited involuntarily via reflex or voluntarily via descending spinal pathways. Although Ia input is excitatory to the α-motoneuron pool, it has also been shown paradoxically to inhibit itself. Our second purpose was to determine if vibration of the patellar tendon during a voluntary knee extension causes a change in the firing rate of already recruited motor units. In the first protocol, 10 subjects voluntarily reproduced the same isometric force profile of the knee extensors that was elicited by vibration of the patellar tendon. Single motor unit recordings from the vastus lateralis (VL) were obtained with tungsten microelectrodes and unitary behaviour was examined during both reflex and voluntary knee extensions. Recordings from 135 single motor units showed that both recruitment thresholds and firing rates were lower during reflex contractions. In the second protocol, 7 subjects maintained a voluntary knee extension at 30 N for approximately 40–45 s. Three bursts of patellar tendon vibration were superimposed at regular intervals throughout the contraction and changes in the firing rate of already recruited motor units were examined. A total of 35 motor units were recorded and each burst of superimposed vibration caused a momentary reduction in the firing rates and recruitment of additional units. Our data provide evidence that Ia input modulates the recruitment thresholds and firing rates of motor units providing more flexibility within the neuromuscular system to grade force at low levels of force production. Electronic Publication     

Crystal Growth in Poly(L‐lactide) Thin Film Revealed by in situ Atomic Force Microscopy

Direct visualization of crystal growth in poly(L ‐lactide) thin films was carried out by using a temperature‐controlled atomic force microscopy (AFM). At the initial stage of crystallization, edge‐on lamellar crystals have nucleated and elongated. Subsequently, the edge‐on lamellar crystals showed S‐shaped morphology and changed their orientation from edge‐on manner to flat‐on one. The curvature of edge‐on lamellar crystal has been discussed in terms of inclination and distortion of polymer chains in the crystal. In addition, mechanism on the formation of flat‐on crystal from edge‐on lamellae was proposed as derivative growth on the basis of in situ AFM observation of crystal growth and enzymatic degradation.

     

Alterations in short-term retention, conditioned avoidance response acquisition and motivation following aluminum induced neurofibrillary degeneration

Aluminum chloride induced neurofibrillary degeneration may provide a useful model for the study of a human dementia process. This possibility was assessed in cats trained to perform on a delayed-response task, a conditioned avoidance task, visual and temporal discrimination tasks and a motivational task involving rewarding intracranial electrical stimulation. After an initial asymptomatic period short term retention and acquisition of a conditioned avoidance response were selectively impaired. The associated ultrastructural abnormalities plausibly implicate the cytoplasmic streaming mechanism in the cellular substrate for some retention and acquisition phenomena.     

Observations on the therapeutic effect of acupuncture plus tuina on retention of urine

将118例尿潴留患者随机分为2组,即针灸推拿治疗组和药物注射治疗组分别进行治疗观察.结果2组疗效有显著差异.并对2组治疗效果、治疗次数、疗效影响等比较分析,提示针灸推拿组显效率明显优于药物注射组.反映针灸配合推拿治疗尿潴留是临床一种较好的治疗方法.     

Coronary artery lesion distribution in patients with chronic kidney disease undergoing percutaneous coronary intervention

PurposeTo determine the location of coronary atherosclerosis distribution observed in patients with chronic kidney disease (CKD).MethodsA cross-sectional study was conducted using the database of cardiovascular medicine data from Saitama Sekishinkai Hospital to clarify the association between renal function and angiographic characteristics of coronary atherosclerosis. In total, 3268 patients who underwent percutaneous coronary intervention were included. Propensity score matching revised the total to 1772. The association of renal function with the location and/or distribution of coronary atherosclerosis lesions was then examined.ResultsOverall, coronary lesion was observed in the left anterior descending coronary artery (LAD) in 56% patients, whereas 28% and 22% were in the right coronary artery (RCA) and left circumflex coronary artery (LCX), respectively. LAD was most affected and observed in 57% patients with stage 1 CKD. RCA was second-most affected, at 26% CKD stage 1, but it increased to 31%, 38%, and 59% in CKD 3, 4, and 5, respectively. In CKD 5 patients, the RCA was the most affected artery (59%), with 41% LAD lesions. Logistic regression analysis after propensity score matching showed that the odds ratios for an RCA lesion was 3.658 in CKD 5 (p = .025) compared with CKD 1 after adjusting for traditional risk factors.ConclusionThe prevalence of RCA lesions, but not LAD or LCX lesions, increased with increasing CKD stage. The pathophysiology of coronary atherosclerosis may differ by lesion location. Deterioration of renal function may affect progression of atherosclerosis more in the RCA than in the LAD or LCX.     

开塞露灌肠治疗产后尿潴留的临床观察

目的:探讨开塞露灌肠对产后尿潴留的临床应用价值。方法:对60例产后尿潴留患者,随机抽取32例为治疗组,28例为对照组。治疗组用开塞露保留灌肠治疗尿潴留;对照组单纯采用新斯的明肌肉注射。结果:治疗有效率治疗组为100%,对照组为64.3%,P<0.01。结论:开塞露灌肠效果明显高于单纯注射新斯的明,两组有显著差异。     

A Coupled CFD-DEM Study on the Effect of Basset Force Aimed at the Motion of a Single Bubble

The physical meaning of Basset force is first studied via polynomial approximation and the Fourier series representation method. After compiling the Basset force into the coupling interface with Visual C, a dynamic mathematical model is set up to describe the upward motion behavior of a single bubble by adopting the CFD-DEM method. Afterwards, the coupling interface with Basset force proposed in this study is verified experimentally and shows very good agreements. The initial velocity, releasing depth, bubble size, density ratio and viscosity ratio are studied qualitatively due to their great importance to Basset force. The ratio of Basset force to the sum of Basset force and drag force and to buoyancy, F→Ba/(F→D+F→Ba) and |F→Ba/F→B|, are employed to quantify the contribution of Basset force quantitatively. In addition, some instructive outlooks and recommendations on a further development of appropriate and justifiable use of Basset force are highlighted at last.     

全口义齿固位及稳定影响因素探讨

目的探讨提高全口义齿固位及稳定的方法。方法通过对患者在试戴及应用全口义齿出现的固位稳定不良现象进行检查分析,寻找出相应的改进方法。结果全口义齿固位不良主要原因是未建立平衡,其次是制作误差及口腔解剖条件差。结论提高全口义齿固位稳定性的有效方法是确保全口义齿良好的咬合关系,提高操作精确度,以弥补口腔条件差的缺陷。     

Study on the Actuating Performance of an Embedded Macro Fiber Composite Considering the Shear Lag Effect

Macro fiber composite (MFC), which are new ultrathin piezoelectric smart materials, are mostly applied in the fields of shell structure deformation and vibration control. Among others, the application of embedded MFCs in sandwich structures has received wide attention. Currently, its actuating force formula is primarily acquired based on the Bernoulli–Euler Model, which does not consider the shear lag effect and actuating force of MFC ends. To study the actuating performance of an MFC in a sandwich structure, according to its action characteristics, the MFC is divided into upper and lower actuating units without any interaction between to two under the condition of plane strain, and the shear lag effect is considered between the units and the top and bottom of the sandwich structure. The actuating force of the MFC ends is obtained by considering its influence on the bending deformation of the sandwich structure, which deduces the actuating force formula of the embedded MFC. In contrast to ANSYS piezoelectric simulation, the distribution of the MFC interior normal stress is similar to the result from ANSYS piezoelectric simulation, and there is a very small deviation between the MFC end and central normal stress and the result from ANSYS piezoelectric simulation. Taking the end deflection of the sandwich structure with an embedded MFC as an example, the actuating force simulation of the MFC considering the shear lag effect is compared with the ANSYS piezoelectric simulation and actuating force simulation based on the Bernoulli–Euler model. The result indicates that the actuating force simulation of the MFC considering the shear lag effect is closer to the ANSYS piezoelectric simulation, which proves the rationality and necessity of considering the shear lag effect and end actuating force of the MFC.