大鼠实验性牙齿移动过程中骨形成蛋白2的表达和意义

目的探讨骨形成蛋白(BMP)超家族的成员BMP-2在大鼠正畸牙齿移动过程中牙周组织的分布和表达。方法用链霉亲和素生物素复合物(SABC)免疫组织化学法,检测实验性大鼠正畸牙齿移动过程中牙周组织BMP-2的表达。结果BMP-2在正畸牙齿加力各个时期存在特异的分布模式。正常牙周组织中主要分布于牙周膜,加力后张力区染色深,压力区为阴性。结论BMP-2参与了大鼠正畸牙齿移动骨改建过程,起非常重要的作用。     

Most cited papers in Toxicon.

Citation of a published work is one of the parameters considered in the analysis of relevance and importance of scientific contributions. In 2002, for the first time the Impact Factor of Toxicon has risen above 2.0, placing it at the 17th position among 76 journals in the 'toxicology' field. The aim of this article was to identify the most cited articles in Toxicon, that have contributed to the steady increase of its Impact Factor. The number of citations, complete reference and type of all documents appearing in Toxicon in the period 1963-2003 were retrieved from the ISI Web-of-Science homepage. The documents retrieved were sorted by the number of citations received. A 'citation index', defined as the number of citations divided by the number of years since publication, was calculated for each document. It was clearly seen that reviews in Toxicon received 4.4-fold more citations than articles. Unexpectedly, it was found that recent papers were proportionally more cited than old ones. A decrease in the proportion of papers dealing on 'snake*' through out the period and the broadened range of subjects of the most cited papers recently published in Toxicon reflects an increased 'visibility' in other fields of toxinology. Research on plant toxins gained its own space in Toxicon with newer publications showing high citation indexes. It can be postulated that these facts helped to increase Toxicon's Impact Factor from 1.248 in 1999 to 2.003 in 2002. With the increased number of issues in Toxicon as well as publications of subject-dedicated volumes containing mostly reviews, the Impact Factor of Toxicon is expected to keep rising in the near future.     

Sodium trimetaphosphate enhances the effect of 250 p.p.m. fluoride toothpaste against enamel demineralization in vitro

This in vitro study investigated the effect of sodium trimetaphosphate (TMP), added to toothpaste containing 250 p.p.m. fluoride, on enamel demineralization. Bovine enamel blocks (n = 96) were subjected to five pH cycles over a 7‐d period and treatment with suspensions of toothpastes containing 0, 250, 500, and 1,100 p.p.m. fluoride (as sodium fluoride), as well as with 250 p.p.m. fluoride containing TMP at 0.25, 0.5, 1.0, and 3.0%. Treatment with toothpaste suspensions was performed under agitation twice a day, for 1 min. Surface and cross‐sectional hardness, and fluoride firmly bound to enamel, were quantified. Data were subjected to one‐way anova , followed by Tukey's test. Low‐fluoride toothpastes containing TMP at 0.25–1.0% resulted in enamel mineral loss similar to that seen for the toothpaste containing 1,100 p.p.m. fluoride. Also, the addition of TMP to the toothpaste containing 250 p.p.m. fluoride promoted enamel fluoride concentrations similar to those obtained for the 500 p.p.m. fluoride group. The toothpaste containing 250 p.p.m. fluoride and 0.25% TMP led to the lowest mineral loss among all groups. It was concluded that the addition of as little as 0.25% TMP to a toothpaste containing 250 p.p.m. fluoride can reduce enamel demineralization to levels similar to those seen for a conventional toothpaste containing 1,100 p.p.m. fluoride, in vitro.     

Patients’ experience of partial tooth loss and expectations to treatment: a qualitative study in Danish and Swedish patients

Knowledge of impairments, wishes and expectations is essential to make correct decisions regarding oral rehabilitation. The purpose of this study was to investigate discomforts, wishes and expectations in patients’ with partial edentulism before entering oral rehabilitation. In Copenhagen, Denmark, and Malmö, Sweden, respectively, 20 patients with partial edentulism seeking rehabilitation were interviewed in a semistructured qualitative manner. The interviews were transcribed and analysed yielding overall domains. Six themes appeared as overall domains: (i) experienced impairments, (ii) experienced social awareness, (iii) expectation to treatment, (iv) expectation to durability/survival, (v) coping strategies dealing with the tooth loss including explanations of the tooth loss and (vi) modifications to experienced impairment. The impairments were mostly experienced as problems in social settings. Most participants expressed a simple wish to function normally; a fixed solution was preferred. Many Danish participants accepted a removable solution whereas only few Swedish participants did so. The domains ‘coping strategies’ and ‘modifications’ were not part of the chosen topics of interest, indicating a high wish of the participants to explain their tooth loss and how they coped with it. In conclusion, a large degree of social impairment was found in the patient group along with several coping strategies. The impairments were modified by a number of factors indicating that highly individualised care and treatment is needed. A state of normality was described as the primary treatment wish with a higher acceptance of removable solutions in Denmark than in Sweden. For final decision‐making, surrounding factors seemed to influence the patients’ choices.     

Comparative evaluation of the impact of minimally invasive preparation vs. conventional straight‐line preparation on tooth biomechanics: a finite element analysis

Minimally invasive endodontics emphasizes preservation of a maximal amount of healthy tooth tissue. However, whether the tooth structure preserved by minimally invasive endodontics can maintain higher fracture resistance is unclear. This study aimed to compare the biomechanics on teeth after minimally invasive (MI) preparation and straight‐line (SL) preparation using finite element analysis. Six finite element analysis models of a mandibular first molar were constructed and divided into two groups (MI and SL). Two loads of 250 N, one vertically stimulating the vertical masticatory force and the other given 45° to the longitudinal axis of the tooth, were applied. Stresses in the teeth were calculated and analyzed. Under both vertical and 45° loads, the greatest stresses were located at the margin of the cavities on the occlusal surfaces. The stress concentration areas of teeth with minimally invasive access cavities were smaller than those of teeth prepared with straight‐line opening in coronal and cervical areas. The stress concentration points in the cervical areas increased with the increase of canal taper in the coronal third. Minimally invasive access preparation reduced the stress distribution in crown and cervical regions. A smaller taper cervical enlargement caused lower stress in the cervical region.     

Biology of tooth replacement in amniotes

Tooth replacement is a common trait to most vertebrates, including mammals. Mammals, however, have lost the capacity for continuous tooth renewal seen in most other vertebrates, and typically have only 1–2 generations of teeth. Here, we review the mechanisms of tooth replacement in reptiles and mammals, and discuss in detail the current and historical theories on control of timing and pattern of tooth replacement and development.     

Ultrastructural Characterization of Mesenchymal and Epithelial Cells Co-Cultured from Human Dental Root Apical Explants

Previous studies have shown the role of cell-cell and cell-matrix interactions in the differentiation of the specific secretory cells of the tooth. In order to elucidate the mechanisms implicated in root dentin formation, we developed a co-culture system of human pulpal mesenchymal and epithelial root sheath cells. Root tips of premolars were cultured in Eagle's basal Medium supplemented with fetal calf serum, ascorbic acid, antibiotics and, for some of them, with sodium β-glycerophosphate. After 60 days of culture, cells were prepared for light and electron microscopy. Three main cell types were observed: (1) polygonal mesenchymal cells showing a functional polarity and producing a dense network of tactoid collagenous fibers. The latter had a specific circular organization that delimited small lacunae around the cells and mineralized in the presence of β-glycerophosphate; (2) spindle-shaped mesenchymal cells mainly localized inside epithelial-mesenchymal knots and synthesizing an abundant collagenous matrix; and (3) epithelial cells lying on the plastic culture dish, on the dense collagenous matrix, or on spindle-shaped cells. Epithelial cells deposited a structured basement membrane when they were lying on the plastic culture dish or on spindle-shaped cells. On the contrary, no basement membrane was found when epithelial cells were overlying the dense collagenous network. Immunoelectron microscopic analysis of type IV collagen and laminin indicated that these two specific basement membrane components were produced by all cell types. These results show that the co-culture system should be valuable for (1) studying the in vitro formation of human dental root hard tissues, (2) characterizing cell-cell and cell-matrix interactions implicated in dental basement membrane production, and (3) isolating populations of cells implicated in dental root formation.     

Long‐term tooth loss in periodontally compromised but treated patients according to the type of prosthodontic treatment. A retrospective study

If prosthodontic treatment is considered after periodontal therapy, the questions arise i) does prosthodontic treatment affect the treatment outcome of the dentition in general and ii) which type of prosthesis is related to best treatment outcome of abutment teeth? Our goal was to compare long‐term tooth loss after comprehensive periodontal therapy in patients with or without prosthodontic treatment. Ninety patients' charts with a total of 1937 teeth who had received comprehensive periodontal treatment 5–17 years ago by the same periodontist were retrospectively evaluated. Sixty‐five patients received fixed dental prostheses (FDP; n = 29) and/or removable partial dentures anchored with clips (RPDC; n = 25) or double crowns (RPDD; n = 25). Twenty‐five patients were also periodontally compromised but treated without prosthodontic treatment and served as a control group. A total of 317 teeth and 70 abutment teeth were lost during 9·7 ± 4·1 years of observation. Thereof, 273 teeth and 48 abutment teeth were lost due to periodontal reasons. Mean tooth loss amounted to 1·2 ± 1·5 (controls) and 4·4 ± 3·4 (partial dentures). Abutment tooth loss was 0·4 ± 1·1 (FDP), 1·0 ± 1·2 (RPDC) and 1·3 ± 1·0 (RPDD). Poisson regressions identified prosthodontic treatment, age, socio‐economic status, diabetes mellitus, mean initial bone loss and aggressive periodontitis as factors significantly contributing to tooth loss. Age, diabetes and non‐compliance contributed to abutment tooth loss. Not considering biomechanical factors, patients with prosthodontic reconstructions under long‐term supportive periodontal therapy were at higher risk for further tooth loss than patients without prostheses. Not only the type of partial denture but also the patient‐related risk factors were associated with abutment tooth loss.     

冲击载荷作用下蛋白质水溶液润滑吸附膜的生长特性

目的研究蛋白质水溶液挤压润滑条件下材料表面蛋白质吸附膜的动态生长特性及其影响因素。方法利用光干涉技术测量球盘点接触在循环冲击条件下BSA蛋白质水溶液的吸附膜厚的生长过程,并研究冲击载荷、冲击次数、材料表面性质对BSA水溶液的吸附成膜特性的影响。结果动态条件下蛋白质润滑吸附膜要比静态工况下的升高很多,冲击条件下蛋白质吸附膜不断生长,并最终达到稳定厚度。小载荷和疏水材料表面有利于蛋白质润滑吸附膜的生长。钢表面极易形成较厚吸附膜,而陶瓷表面吸附膜厚较低。结论针对冲击载荷作用下蛋白质水溶液润滑吸附膜的生长特性研究对人工关节磨损、松动等的治疗、预防具有一定的临床指导意义。