Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

肝退变结节的病理学改变及CT、MRI表现

肝细胞肝癌及胆管细胞癌均可在退变结节的基础上发展形成，因此及早、准确的诊断肝退变结节具有积极的临床意义。本文通过分析肝退变结节的CT、MRI表现及病理学改变，以期提高对肝退变结节的诊断水平。     

CT对肾结核的诊断意义探讨

目的探讨肾结核的CT表现，分析CT检查在肾结核诊断中的意义。方法对42例肾结核患者进行CT检查及增强扫描并结合其他临床资料作综合分析。结果CT检查肾内有低密度病灶，空洞形成，多发空洞有特征性改变。结论肾结核的CT表现有一定的特征性，CT检查优于其他方法，在肾结核的诊断中有重要意义。     

经CT测量成年人鼻腔、鼻窦部分骨性结构(附100例病例分析)

对100例慢性鼻窦炎患者的鼻窦CT片进行骨性结构测量,结果示前筛内外径0.79±0.06 cm,后筛内外径1.71±0.08 cm,筛板至鼻底部4.01±0.10 cm,筛顶至鼻底5.18±0.11 cm。该数据与经颅骨测得的数据近似,可以作为鼻窦手术的参考数据。100例慢性鼻窦炎患者中,各鼻腔发病率不等,鼻道窦口复合体发病率(91%)最高,认为与其解剖部位狭窄有关,提示临床医生通过阅CT片掌握鼻腔、鼻窦微细解剖结构的重要性。     

CR、CT、MRI在骨肿瘤诊断中的临床价值

[目的]评价计算机X线摄影（CR）、CT、磁共振成像（MRl）在骨肿瘤诊断中的临床价值。[方法]回顾分析55例经病理证实的影像学资料，其中55例均有CR平片，21例CT扫描，20例做了MRI检查。[结果]55例中51例CR片清晰显示骨质改变，40例CR片清晰显示病灶边界，20例CR片清晰显示骨膜反应，19例CR片清晰显示病灶内有大小不一钙化。21例行CT扫描病例均清晰显示骨质改变、病灶边界、病灶内有大小不一钙化，8例清晰显示骨膜反应。20例做了MRI检查病例均清晰显示病灶边界及软组织肿块，8例显示相应骨髓水肿。[结论]CR片仍为骨肿瘤的首选检查方法，CT较好显示了肿瘤的范围及细微结构，MRI对显示肿瘤的范围、软组织肿块及相应骨髓水肿有明显优势。三者相结合有助于骨肿瘤的诊断。     

螺旋CT多时相扫描鉴别诊断肝细胞癌和血管瘤

目的:探讨螺旋CT多时相扫描对肝细胞癌和血管瘤的鉴别诊断。材料和方法:对37例患者(肝癌16例,血管瘤21例)行螺旋CT平扫和增强扫描,分析其表现。结果:37例平扫均发现低密度灶。肝细胞癌在动脉期75%有显著增强,呈高密度,在门静脉期和延迟期则呈低密度;血管瘤54%动脉期有典型增强表现,门静脉期100%有增强,24%全部填充,延迟期91%为高密度或等密度。结论:肝细胞癌和血管瘤在螺旋CT多时相增强扫描中,各有其典型的CT表现,两者鉴别的关键是门静脉期。     

CT定位下经皮穿刺射频消融治疗肺肿瘤疗效分析

目的探讨CT引导下集束电极射频治疗肺恶性肿瘤的疗效。方法对1999年以来在cT定位引导下。采用WE7568集束电极射频肿瘤消融仪。用集束电极经皮穿刺到肺内肿瘤进行射频消融治疗，每针次温度75～95℃左右维持10min或15min．结果78例病人经CT引导行射频消融80例次，绝大多数病灶（77．4％）复查CT均有不同程度缩小或CT值下降30～37，疼痛等症状明显缓解。无严重并发症，无围手术期死亡。结论CT定位下经皮集束电极射频消融对肺恶性肿瘤的近期疗效明显，对晚期肺癌、多发性肺转移瘤及不能耐受手术者，可作为综合治疗的方法之一。     

多层螺旋CT灌注成像在颅脑系统疾病中的应用研究

随着多层螺旋CT的推广使用,使以脑血流动力学研究为目的的多层螺旋CT脑灌注成像(MSCT perfusion imaging)逐渐变为现实,为综合应用CT扫描技术提供了条件,为临床提供了一种全新的、极具潜力的、适用面广的影像检查新技术。一、CT脑灌注成像理论基础1.脑灌注成像理论的形成:在198     

螺旋CT双期增强扫描与病灶延迟期扫描在肝癌诊断中的应用

目的：研究螺旋CT动脉期、门脉期及病灶延迟期扫描在肝癌诊断中的应用，以进一步选择理想的扫描时期和方案。方法：对48例肝细胞性肝癌患者行平扫及增强扫描，造影剂注射速率为3ml/s，然后开始动脉期、门脉期及病灶延迟期扫描。统计各期的病灶检出数，观察病灶在不同时期的特征。结果：动脉期、门脉期及病灶延迟期的病灶检出率分别为91.9％、76.9％、78.8％，动脉期和门脉期、病灶延迟期之间均有显著差异，而门脉期和病灶延迟期之间无差异。结论：在肝癌的检出方面动脉期价值最大，而门脉期和延迟期之间无差异。双期扫描（动脉期加门脉期）可作为肝癌CT诊断的常规技术，对不典型病例，病灶延迟期很有必要，有助于病灶的定性。