Precision and Accuracy of Measurements on CT Scout View

ObjectivesThe purposes of this study were to (1) investigate the limits of measurements on scout view in three computed tomography axes, x, y and z and (2) develop a model to provide better understanding of measurement accuracy.MethodsFor the first objective, anteroposterior and lateral scout views of a Catphan phantom 200 mm in diameter and length were acquired with a GE scanner at 21 different table heights. Phantom measurements on scout view were performed by two experienced readers. The comparison of their measures provided estimation of precision. The accuracy was assessed by determining the bias, calculated as the difference between the values measured on scout view and the real phantom size. Second, a model was developed investigating the relationship between the dimensions of the object, its image, and the table height. This relationship was tested on our data.ResultsScout view measurements were precise, with less than 0.53% difference between readers. In addition, small biases of about 1 mm were detected in the z-axis, whatever the table height. In the other axes, serious biases from −13 to +73 mm were measured. Furthermore, at isocentre, overestimations up to 7 mm were shown. The results also indicated that biases in scout view measurements are because of the geometrical projection related to the object-detector distance.ConclusionsMeasurements in the table movement axis are precise and accurate, conferring to scout views an added value for preoperative planning in orthopedic surgery.     

D6S1043、D12S391基因座与主动攻击行为的关联研究

目的:探讨D6S1043、D12S391基因座的基因多态性对主动攻击行为的影响。方法:应用聚合酶链反应技术结合毛细管电泳法对114例男性主动攻击行为者(研究组)及120名健康男性(对照组)进行D6S1043、D12S391基因座的基因型及等位基因检测,分析D6S1043、D12S391基因座多态性与主动攻击行为的相关性。结果:研究组D6S1043基因座中12~19基因型频率(13.16%)明显高于对照组(1.67%)(P0.05);两组等位基因频率差异无统计学意义;两组D12S391基因座的基因型及等位基因频率差异无统计学意义。结论:D6S1043基因座中12~19基因型可能主动攻击行为有关。     

Efficacy,effectiveness and side effects of medications used to prevent fractures

There is an increasing number of effective therapies for fracture prevention in adults at risk of osteoporosis. However, shortcomings in the evidence underpinning our management of osteoporosis still exist. Evidence of antifracture efficacy in the groups of patients who most commonly use calcium and vitamin D supplements is lacking, the safety of calcium supplements is in doubt, and the safety and efficacy of high doses of vitamin D give cause for concern. Alendronate, risedronate, zoledronate and denosumab have been shown to prevent spine, nonspine and hip fractures; in addition, teriparatide and strontium ranelate prevent both spine and nonspine fractures, and raloxifene and ibandronate prevent spine fractures. However, most trials provide little information regarding long‐term efficacy or safety. A particular concern at present is the possibility that oral bisphosphonates might cause atypical femoral fractures. Observational data suggest that the incidence of this type of fracture increases steeply with duration of bisphosphonate use, resulting in concern that the benefit–risk balance may become negative in the long term, particularly in patients in whom the osteoporotic fracture risk is not high. Therefore, reappraisal of ongoing use of bisphosphonates after about 5 years is endorsed by expert consensus, and ‘drug holidays’ should be considered at this time. Further studies are needed to guide clinical practice in this area.     

Importance of serum phosphate in elderly patients with diabetes mellitus

BACKGROUND Metabolic disturbances including changes in serum calcium,magnesium or phosphate(P) influence the prevalence of type 2 diabetes mellitus(DM).We assessed the importance of serum P in elderly patients with type 2 DM vs nondiabetes mellitus(non-DM) in relation to renal function.AIM To determine the association between serum P and serum glucose or insulin resistance in diabetic and non-diabetic patients.METHODS One hundred-ten subjects with a mean age of 69.02±14.3 years were enrolled.Twenty-nine of the participants had type 2 DM(26.4%).The incidence of hypertension,smoking and receiving vitamin D(vitD) derivates were recorded.The participants were classified by both estimated glomerular filtration rate(eGFR) and albuminuria categories according to the Kidney Disease Improving Global Outcomes 2012 criteria.RESULTS We divided the patients in two groups according to the P cut-off point related to DM value.A comparison between high and low P showed that body mass index30.2±6.3 vs 28.1±4.6(P=0.04),mean glucose 63.6 vs 50.2(P=0.03),uric acid 6.7±1.6 vs 6.09±1.7(P=0.05),mean intact-parathyroid hormone 68.06 vs 47.4(P=0.001),systolic blood pressure 147.4±16.7 vs 140..2±16.1(P=0.02),mean albuminuria 63.2 vs 50.6(P=0.04) and eGFR 45.6±22.1 vs 55.4±21.5(P=0.02)were significantly different.χ~2 tests showed a significant association between high P and DM,hypertension,receiving vitD,smoking and eGFR stage(χ~2=6.3,P=0.01,χ~2=3.9,P=0.03,χ~2=6.9,P=0.009,χ~2=7.04,P=0.01 and χ~2=7.36,P=0.04,respectively).The adjusted model showed that older age,female gender and increased body mass index were significant predictors of type 2 DM when entering the covariates.CONCLUSION High serum P contributes to vascular and metabolic disturbances in elderly patients with type 2 DM and renal impairment.     

Morphological imaging and CT histogram analysis to differentiate pancreatic neuroendocrine tumor grade 3 from neuroendocrine carcinoma

PurposeTo compare morphological imaging features and CT texture histogram parameters between grade 3 pancreatic neuroendocrine tumors (G3-NET) and neuroendocrine carcinomas (NEC).Materials and methodsPatients with pathologically proven G3-NET and NEC, according to the 2017 World Health Organization classification who had CT and MRI examinations between 2006-2017 were retrospectively included. CT and MRI examinations were reviewed by two radiologists in consensus and analyzed with respect to tumor size, enhancement patterns, hemorrhagic content, liver metastases and lymphadenopathies. Texture histogram analysis of tumors was performed on arterial and portal phase CT images. images. Morphological imaging features and CT texture histogram parameters of G3-NETs and NECs were compared.ResultsThirty-seven patients (21 men, 16 women; mean age, 56 ± 13 [SD] years [range: 28-82 years]) with 37 tumors (mean diameter, 60 ± 46 [SD] mm) were included (CT available for all, MRI for 16/37, 43%). Twenty-three patients (23/37; 62%) had NEC and 14 patients (14/37; 38%) had G3-NET. NECs were larger than G3-NETs (mean, 70 ± 51 [SD] mm [range: 18 - 196 mm] vs. 42 ± 24 [SD] mm [range: 8 - 94 mm], respectively; P = 0.039), with more tumor necrosis (75% vs. 33%, respectively; P = 0.030) and lower attenuation on precontrast (30 ± 4 [SD] HU [range: 25-39 HU] vs. 37 ± 6 [SD] [range: 25-45 HU], respectively; P = 0.002) and on portal venous phase CT images (75 ± 18 [SD] HU [range: 43 - 108 HU] vs. 92 ± 19 [SD] HU [range: 46 - 117 HU], respectively; P = 0.014). Hemorrhagic content on MRI was only observed in NEC (P = 0.007). The mean ADC value was lower in NEC ([1.1 ± 0.1 (SD)] × 10⁻³ mm²/s [range: (0.91 - 1.3) × 10⁻³ mm²/s] vs. [1.4 ± 0.2 (SD)] × 10⁻³ mm²/s [range: (1.1 - 1.6) × 10⁻³ mm²/s]; P = 0.005). CT histogram analysis showed that NEC were more heterogeneous on portal venous phase images (Entropy-0: 4.7 ± 0.2 [SD] [range: 4.2-5.1] vs. 4.5 ± 0.4 [SD] [range: 3.7-4.9]; P = 0.023).ConclusionPancreatic NECs are larger, more frequently hypoattenuating and more heterogeneous with hemorrhagic content than G3-NET on CT and MRI.     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.