Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

某设备所致脉冲X射线辐射场测量与防护评价

目的 了解某设备实验条件下不同位置脉冲X射线电离辐射水平，提出适当的防护建议。方法 采用热释光测量方法，分别在设备舱周围不同方向不同距离布放热释光剂量计，累积一定数量脉冲辐射后进行测量；采用电离室型X、γ剂量率仪（FJ-347A）实时测量工作状态下不同距离处电离辐射剂量率水平。依据《电离辐射防护与辐射源安全基本标准》（GB18871—2002）规定的职业照射人员和公众个人剂量限值提出不同工作位辐射防护建议。结果 热释光剂量计累计接收3 000个脉冲辐射，设备舱外壁0.01～8.98 mGy，顶部0.01～15.67 mGy，距外壁1～12 m之间0.01～2.18 mGy，工作位0 mGy。工作状态下，X射线剂量率仪测得距设备舱外侧壁1～20 m之间空气比释动能率范围0.26～16 mGy/h。结论 热释光剂量计、电离室型剂量率仪测量结果基本一致，说明两种方法均可用于脉冲X射线测量；工作状态下设备舱外近距离处辐射剂量率较高，可通过采取防护措施或者限制人员工作量以满足辐射防护要求。     

The respiratory syncytial virus fusion protein-specific B cell receptor repertoire reshaped by post-fusion subunit vaccination

Respiratory syncytial virus (RSV) is the major cause of acute lower respiratory illness in children of less than 5 years of age which usually results in hospitalization or even in death. Vaccine development is hampered in consequence of a failed vaccine trial with fatalities in the 1960s. Even though research has been more focused on the RSV fusion protein in its pre-fusion conformation, maternal vaccination with post-fusion protein (post F) was considered as a promising vaccine strategy for passive immunization of babies, because post F preserves very potent neutralizing epitopes. We extensively analyzed post F-binding B cell receptor (BCR) repertoires of three vaccinees who received a post F-subunit vaccine in the context of a first-in-human, Phase 1, randomized, observer-blind, placebo-controlled clinical trial (ClinicalTrials.gov Identifier: NCT02298179). In order to compare the vaccine-induced BCR repertoires with BCR repertoires induced by natural infection, we also analyzed pre F- and post F-binding BCRs isolated from a healthy blood donor with relatively high F-binding memory B cell (MBC) frequencies. Analysis of the vaccine-induced repertoires revealed that preferentially V_H4-encoded BCRs were expanded in response to vaccination. Estimation of antigen-driven selection further demonstrated that expanded BCRs accumulated positively selected replacement mutations which substantiated the hypothesis that post F-vaccination induces diversification of V_H4-encoded BCRs in germinal centers. Comparison of the vaccine-induced BCR repertoires with clonally related pre and post F-binding BCRs of the healthy blood donor suggested that the vaccine expanded pre/post F cross-reactive MBCs. Interestingly, several vaccine-induced BCRs shared stereotypic VDJ gene junctions with known neutralizing Abs. Once expressed for functional characterization, the selected monoclonal Abs demonstrated the predicted neutralization activities in plaque reduction neutralization assays indicating that the post F-vaccine induced expansion of neutralizing BCRs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

A modality-specific somatosensory evoked potential test protocol for clinical evaluation: A feasibility study

ObjectiveWe aimed to establish an objective neurophysiological test protocol that can be used to assess the somatosensory nervous system.MethodsIn order to assess most fiber subtypes of the somatosensory nervous system, repetitive stimuli of seven different modalities (touch, vibration, pinprick, cold, contact heat, laser, and warmth) were synchronized with the electroencephalogram (EEG) and applied on the cheek and dorsum of the hand and dorsum of the foot in 21 healthy subjects and three polyneuropathy (PNP) patients. Latencies and amplitudes of the modalities were assessed and compared. Patients received quantitative sensory testing (QST) as reference.ResultsWe found reproducible evoked potentials recordings for touch, vibration, pinprick, contact-heat, and laser stimuli. The recording of warm-evoked potentials was challenging in young healthy subjects and not applicable in patients. Latencies were shortest within Aβ-fiber-mediated signals and longest within C-fibers. The test protocol detected function loss within the Aβ-fiber and Aδ-fiber-range in PNP patients. This function loss corresponded with QST findings.ConclusionIn this pilot study, we developed a neurophysiological test protocol that can specifically assess most of the somatosensory modalities. Despite technical challenges, initial patient data appear promising regarding a possible future clinical application.SignificanceEstablished and custom-made stimulators were combined to assess different fiber subtypes of the somatosensory nervous system using modality-specific evoked potentials.     

Direct oral anticoagulants (DOACs) and neck of femur fractures: Standardising the perioperative management and time to surgery

Demographic projections for hip fragility fractures indicate a rising annual incidence by virtue of a multimorbid, ageing population with more noncommunicable diseases (NCDs). NCDs are characterised by slow progression and long duration ranging from ischaemic cardiovascular disease, cerebrovascular disease, diabetes, chronic obstructive pulmonary disease to various cancers. Management of this disease burden often involves commencing patients on oral anticoagulants to reduce the risk of thromboembolic events. The use of direct oral anticoagulants (DOACs) in clinical practice has increased due to their rapid onset of action, short half-life and predictable anticoagulant effects, without the need for routine monitoring. Safe and timely surgical intervention relies on reversal of anticoagulants. However, the lack of specific evidence-based guidelines for the perioperative management of patients on DOACs with hip fractures has proved challenging; in particular, the accessibility of DOAC-specific assays, justification of the cost-benefit ratio of targeted reversal agents and indications for neuraxial anaesthesia. This has led to potentially avoidable delays in surgical intervention. Following a literature review of the pharmacokinetic and pharmacodynamics of commonly used DOACs in our region including the role of surrogate markers, we propose a systematic, evidence-based guideline to the perioperative management of hip fractures DOACs. We believe this standardised protocol can be easily replicated between hospitals. We recommend that if patients are deemed suitable for a general anaesthesia, with satisfactory renal function, optimal surgical time should be 24 h following the last ingested dose of DOAC.     

Outcomes After Aortic Valve Replacement for Asymptomatic Severe Aortic Regurgitation and Normal Ejection Fraction

1. Download : Download high-res image (123KB)
2. Download : Download full-size image

     

Maximizing intelligence obtained from higher-order DNA mixtures from volume crime samples

ABSTRACT

This work collates data from the analysis of complex mixtures analysed in STRmix during routine no-suspect volume crime work. It interrogates the upload rate for these types of mixtures and which component of the profile has been able to be interpreted for upload. The number of profiles giving multiple uploads and the amount of replicate PCR analysis has been collated.     

TLR9在不同胎龄新生儿脐血中的表达变化

目的 通过观察早产儿不同胎龄Toll样受体9（TLR9）的表达，探讨早产儿免疫功能低下的机制。方法 采集2010年7月至2014年6月在上海市嘉定区妇幼保健院产科出生的活产新生儿的脐血229份，按胎龄分为4组，28~31周组，31~34周组，34~37周组，≥37周组，采用流式细胞术和实时荧光定量PCR方法，分别检测其TLR9的蛋白和mRNA表达情况，了解其与胎龄之间的关系，并分析mRNA和蛋白表达间的相关性。结果 TLR9阳性细胞率在28~31周组，31~34周组，34~37周组，≥37周组分别为（15.93±6.23）%，（11.63±6.70）%，（13.66±6.88）%，（20.51±12.06）%；其在胎龄28~31周较高，至31~34周逐渐下降至最低，两组差异有统计学意义（P<0.05）；34~37周后TLR9阳性细胞率表达逐渐升高，至≥37周达最高，两胎龄组比较，差异具有统计学意义（P<0.05）。31~37周间新生儿脐血TLR9阳性细胞率与胎龄呈正相关（r=0.273，P=0.006）。TLR9 mRNA表达在28~31周组，31~34周组，34~37周组，≥37周组分别为（4.95±3.44）%，（8.89±8.49）%，（13.91±10.92）%，（7.19±7.11）%；其在28~36周逐渐升高，与胎龄呈正相关（r=0.355，P< 0.001）。≥37周TLR9 mRNA表达量下降，该值虽高于28~31周，但差异无统计学意义（P>0.05）。相关性分析表明，同胎龄时期同样本新生儿的TLR9 mRNA和TLR9阳性细胞率之间存在负相关（r=-0.227，P=0.011）。结论 TLR9阳性细胞率和TLR9 mRNA表达在不同胎龄组新生儿间有差异，TLR9阳性细胞率表达在31~37周间随着胎龄的增加而增加，TLR9 mRNA在28~36周间随着胎龄的增加而增加。