Bileaflet Aortic Valve Prosthesis Pivot Geometry Influences Platelet Secretion and Anionic Phospholipid Exposure

The clinical histories of the Medtronic Parallel (MP) and St. Jude Medical (SJM) Standard valves suggest pivot geometry influences the thrombogenic characteristics of bileaflet prostheses. This work studied the effects of various pivot geometries on markers of platelet damage in a controlled, in vitro apparatus. The Medtronic Parallel valve, two St. Jude Medical valves, and two demonstration prostheses were used to study the effects of bileaflet pivot design, gap width, and size on platelet secretion and anionic phospholipid expression during leakage flow. A centrifugal pump was used to drive blood through a circuit containing a bileaflet prosthesis. Samples were taken at set time intervals after the start of the pump. These samples were analyzed by cell counting, flow cytometry, and enzyme-linked immunosorbant assay. No significant differences were observed in platelet secretion or anionic phospholipid expression between experiments with the SJM 27 Standard regular leaker, the SJM 20 regular leaker, and the MP 27 valves. Significant differences in platelet secretion and anionic phospholipid expression were observed between a SJM 27 Standard regular leaker and a SJM 27 high leaker valve. These studies suggest that leakage gap width within bileaflet valve pivots has a significant effect on platelet damage initiated by leakage flow. © 2001 Biomedical Engineering Society. PAC01: 8719Uv, 8719Tt, 8380Lz, 8768+z     

Monoclonal antibodies to bovine serum albumin: affinity and specificity determinations

A panel of 12 monoclonal antibodies (MAb) to bovine serum albumin (BSA) was developed and characterized as to their physiochemical and immunological properties. Affinity constants of the MAb varied over a wide range from 10(5) to 10(8) M-1. MAb were assembled into several groups of non- or minimally interacting antibodies by analysis of competitive binding experiments, and BSA domain and subdomain specificities of the MAb were assigned by analysis of results of MAb binding to purified BSA fragments. Further fine specificity delineation was accomplished by examination of cross-reactivity patterns to several mammalian albumins. The data suggest that some of the low affinity MAb recognize sites on different portions of the BSA molecule, indicating that similar epitopes exist on different domains of the BSA molecule.     

Biological characterization of a novel biodegradable antimicrobial polymer synthesized with fluoroquinolones.

Biomaterial-related infections continue to represent a significant challenge to the medical community. Several approaches have been utilized to incorporate antimicrobial agents at the surface of implant devices in attempts to delay or eliminate the formation of biofilms. To date, most of these strategies have focused on drug conjugation or diffusion-limited systems for the delivery of such pharmaceutical agents. More recently, work has been presented on the feasibility of incorporating drugs into the backbone of polymers as a main-chain monomer. When sequenced into the backbone of the polymer with other monomers that are hydrolytically sensitive to enzyme-catalyzed breakdown, it is thought that drugs may be able to be selectively released. Specifically, degradable polyurethanes have been synthesized with fluoroquinolone antibiotics and have shown an ability to kill bacteria when released following degradation of the polymer chains by the macrophage-derived enzyme cholesterol esterase. However, specificity of the cleavage sites in the polymer was difficult to control. Since cholesterol esterase has specificity for hydrophobic moieties, it is desirable to alter the formulation of the polyurethanes to incorporate long hydrophobic monomers immediately adjacent to the ciprofloxacin molecule. Hence, the current study focuses on evaluating the enzyme-catalyzed degradation of a degradable polyurethane synthesized with 1,12 diisocyanatododecane as a substitute for 1,6 diisocyanatohexane, which was used in previous work. Validation of specific ciprofloxacin release and the generation of antimicrobial are shown. A preliminary cell study to assess the cytotoxicity of this biodegradable antibiotic polymer shows that the material has no observable effects on cell proliferation or cell membrane structure.     

Quantitative analysis of binary adsorbed protein films by time of flight secondary ion mass spectrometry

Time of flight secondary ion mass spectrometry (ToF-SIMS) is an ideal technique for the analysis of adsorbed protein films because of its surface sensitivity and chemical specificity. In this study, we examined ToF-SIMS with the multivariate calibration method partial least squares regression (PLSR) for the determination of the relative abundance of the components in binary protein films adsorbed onto mica, PTFE, and heptyl amine plasma polymer substrates. These results have been compared with independently measured 125I-radiolabeled protein adsorption experiments. By applying PLSR to the ToF-SIMS data, the relative abundance of the components in the binary adsorbed protein films was quantified, and the agreement between the ToF-SIMS and 125I-radiolabeling data was measured by the root mean square prediction error (RMSPE). Differences in protein quantification by PLSR and 125I-radiolabeling ranged from 5 to 25 mass % RMSPE and were highly dependent on the structure of the adsorbed protein film, the substrate surface chemistry and morphology, and the number of latent variables retained in the PLSR model. The limit of detection for the minor component in the adsorbed protein film was found to be approximately 10 mass %. This study demonstrates that the combination of ToF-SIMS and multivariate calibration provide complementary information to 125I-radiolabeling about the composition and structure of binary adsorbed protein films.     

Development of an injectable,in situ crosslinkable,degradable polymeric carrier for osteogenic cell populations. Part 2. Viability of encapsulated marrow stromal osteoblasts cultured on crosslinking poly(propylene fumarate)

The effect of temporary encapsulation of rat marrow stromal osteoblasts in crosslinked gelatin microparticles on cell viability and proliferation was investigated in this study for microparticles placed on a crosslinking poly(propylene fumarate) (PPF) composite over a 7 day time period. Encapsulated cells were seeded on crosslinking PPF composites at times up to 10 min following initiation of the crosslinking reaction, and also on fully crosslinked PPF composites and tissue culture polystyrene controls, with a cell seeding density of 5.3 x 10(4) cells/cm2. The crosslinked PPF composite exhibited an average gel point of 10.3 min and an average maximum crosslinking temperature of 47.5 degrees C. Cell viability and proliferation were assessed by DNA and 3H-thymidine assays and the results were compared with those for nonencapsulated cells. The results showed that the addition time of cells to a crosslinking PPF composite had a large effect on cell viability and proliferation for both encapsulated and nonencapsulated cells with more surviving cells added at later time points. Most importantly, the temporary encapsulation of cells significantly enhanced cell viability at earlier time points. The data indicate that the presence of gelatin microparticles does not affect the crosslinking of a PPF composite. They further suggest that the temporary encapsulation of cells in crosslinked gelatin microparticles may preserve the viability of cells contained in an actively crosslinking PPF composite used as an injectable polymeric scaffold serving also as a carrier for osteogenic cell populations.     

Albumin adsorption on alkyl chain derivatized polyurethanes: I. The effect of C-18 alkylation

The initial adsorption rate of delipidized Human Serum Albumin (HSA) is increased by addition of C-18 alkyl chains to a polyurethane. The presence of alkyl chains does not appear to influence the total amount of HSA adsorbed after one hour exposure to a 5.0 mg/mL HSA solution. Neither does the desorption following one hour of adsorption appear to be influenced by the presence of alkyl chains. A study of the effects of solution concentration and temperature showed that the initial adsorption rates on both polymers are proportional to the protein concentration raised to the 0.36 power, and that alkylation of the polymer increases the activation energy of the initial adsorption rate above the 14 kJ/mol observed for the underivatized polyurethane. A new technique is presented to quantify the mass of adsorbed protein using Fourier transform infrared spectroscopy and attenuated total reflection optics. This technique uses the absorbance of bulk protein as an internal calibration reference, and appears to be as accurate and perhaps more precise than radiolabeling techniques.     

Surface properties and cell response of low metal ion release Ti-6Al-7Nb alloy after multi-step chemical and thermal treatments

Ti-6Al-7Nb samples treated by innovative multi-step chemical and thermal processes were characterized in order to evaluate their surface properties and cell interaction. The main object was to asses if the treatments were effective in order to obtain a surface presenting at the same time bone-like apatite induction ability, low metal ion release, good cell response and high protein binding. The morphology, crystallographic structure, porosity and wettability of the treated materials were investigated, as well as their interaction with simulated body fluid during soaking for different times. Cytotoxicity, protein adsorption tests and in vitro fibroblast and osteoblast-like cell cultures were also performed.     

Characterization of acrylic bone cement using dynamic mechanical analysis

Dynamic mechanical analysis (DMA) was used to characterize the properties of acrylic bone cement with the addition of tricalcium phosphate (TCP), hydroxyethyl methacrylate (HEMA), and ethylene glycol dimethacrylate (EGDMA). The glass transition temperature of acrylic bone cement is >100 degrees C; the cement has a flat modulus response near human body temperature. The height of the damping peak decreases and becomes broader with increasing TCP content. Thus, TCP is incompatibile with acrylic bone cement. When the frequency is changed from high to low, the damping peak shifts to low temperature. The shift in damping peak with frequency indicates that this relaxation is time-dependent. When acrylic bone cement contains TCP with HEMA and EGDMA, the incompatibility between acrylic bone cement and TCP can be ameliorated.     

Determination of specific oxygen uptake rates in human hematopoietic cultures and implications for bioreactor design

Oxygen plays an important role in the cultivation of primary cellsex vivo. In this study, we used hermetically sealed tissue culture well inserts equipped with oxygen electrodes to measure the oxygen utilization of cultured human bone marrow mononuclear cells (BM MNCs). The oxygen uptake rate (OUR) of BM MNCs was determined during a 14-day culture in which both adherent and nonadherent cells were present. Early in the culture, the cells exhibited very low OURs. The specific OURs (uptake rate per cell) were at approximately 0.005 μmol/10⁶ cells/hr shortly after the initiation of culture. The OUR then increased as the cultures developed. After about 8 to 10 days of cultivation the specific OURs had increased to 0.038±0.006 and 0.025±0.005 μmol/10⁶ cells/hr for adherent and nonadherent cells, respectively, after which no further increase was observed. Based on these oxygen uptake rate data, a mathematical model of oxygen diffusion was formulated and use to investigate issues associated with hematopoietic bioreactor design, including initial cell density, medium depth, reactor configuration, and oxygen partial pressure.In situ OUR measurements confirmed predicted oxygen limitations based on the mathematical model and the experimentally determined OURs. High-density hematopoietic cultures present design challenges in terms of sufficient and uniform delivery of oxygen to an active hematopoietic culture. These challenges can be met by using parallelplate bioreactors with thin liquid layers.