The Health Belief Model in predicting healthcare workers' intention for influenza vaccine uptake in Jordan

BackgroundTheories of health behavior change are being inadequately adopted to understand the reasons behind low influenza vaccination rates among healthcare workers (HCWs). The Theory of Planned Behavior (TPB) is being used to predict intention-behavior relationship while the Health Belief Model (HBM) is being employed to predict actual behavior. The purpose of this study was to test a conceptual model based on the HBM’s constructs to predict Jordanian HCWs’ intentions for influenza vaccine uptake as an alternative to the TPB.MethodA cross-sectional questionnaire-based study was conducted in 2016 in a tertiary teaching hospital in Amman-Jordan including a convenience sample of 477 HCWs with direct patient contact. The study instrument was tested for validity and reliability. A conceptual regression model was proposed incorporating the constructs of the primary HBM with some modifications in the threat construct as well as an additional variable about explicit past vaccination behavior (in the past year and/or any previous history of influenza vaccine uptake).ResultsAlmost all the constructs of the HBM demonstrated significant differences between participants intending and those who did not intend to vaccinate against influenza. After adjusting for the confounding variables in the final conceptual regression model, past vaccination behavior (OR= 4.50, 95%Confidence Interval 3.38–6.00, P< 0.0005) and the perceived benefit scale (OR= 1.19, 95% Confidence Interval 1.11–1.28, P< 0.0005) were the only significant predictors of intentions to vaccinate against influenza in the next season.ConclusionTaking into consideration the altruistic beliefs of HCWs and their explicit past vaccination history augments the utility of the original HBM tool in predicting HCWs’ intentions to vaccinate against influenza in a way that is consistent with the predictive ability of the Theory of Planned Behavior.     

微滴式数字PCR和实时荧光定量PCR对新型冠状病毒肺炎患者不同时间血便尿中核酸检测结果初步探讨

目的 分析微滴式数字PCR(droplet digital PCR, ddPCR)和实时荧光定量PCR(quantitative real-time PCR,qPCR)的核酸检测结果,比较两种方法检测各类样本的差异性,为改进新型冠状病毒核酸检测方案提供数据支持。 方法 利用ddPCR和qPCR技术对已经确诊的3例新型冠状病毒肺炎患者发病不同时间的全血、尿液、粪便共22份标本进行新型冠状病毒核酸检测。 结果 两种方法对人保守区域基因扩增结果一致:全血标本信号最强,尿液次之,粪便最少;ddPCR在1份全血,1份尿液,5份粪便中检出ORF-1ab和N基因的阳性微滴,qPCR仅在3份粪便中检出上述基因,漏检的3个标本基因拷贝数平均浓度为128 copies/ml;ddPCR在发病<5、5~15、>15 d的各类标本中都有检出,qPCR检出以中晚期为主;重症病例用ddPCR均可测到阳性微滴,qPCR检测的各类标本均为阴性;轻症病例的各类标本中qPCR只有粪便核酸检测阳性,ddPCR检出率高于qPCR。 结论 ddPCR可以有效克服qPCR 灵敏度不足的难题,是对qPCR 的有益补充,尤其是针对病毒载量比较低的血液、尿液和可疑的粪便或肛拭子标本,适用于早期感染的判断及患者治愈后出院诊断。     

同型半胱氨酸与绝经后女性颈动脉粥样硬化的相关性研究

目的 研究同型半胱氨酸(homocysteine,Hcy)是否为绝经后女性颈动脉粥样硬化的独立风险因素。 方法 对2017年12月—2018年12月北京协和医院健康体检的1 204名55岁以上绝经后女性,进行Hcy检测和颈动脉超声检查。使用多变量logistic回归方法分析Hcy及其他传统风险因素对颈动脉粥样硬化的影响。 结果 Hcy平均值(12.4±3.3)μmol/L,高Hcy血症176人(14.62%)。Hcy与年龄和BMI正相关(分别r=0.19,P<0.001;r=0.11, P<0.001)。颈动脉粥样硬化患者的Hcy显著升高(Z=-2.56,P=0.011)。logistic回归显示,对于颈动脉粥样硬化只有年龄(OR=1.11,95%CI:1.09~1.14)和收缩压(OR=1.02,95%CI:1.01~1.02)是独立风险因素;对颈动脉斑块形成年龄(OR=1.10,95%CI:1.08~1.12)、收缩压(OR=1.02,95%CI:1.01~1.03)、糖化血红蛋白(OR=1.27,95%CI:1.07~1.50)和高血压病史(OR=1.40,95%CI:1.06~1.87)是独立危险因素。 结论 在绝经后女性,Hcy不是动脉粥样硬化发生的独立风险因素,筛查高Hcy血症在预防该人群颈动脉粥样硬化的意义仍需进一步证明。     

精索静脉曲张手术后患者的管理策略

手术治疗精索静脉曲张在改善精液质量、提高配偶自然怀孕率和缓解局部疼痛症状中的作用已为多数医生所认同。随着手术方式的改进,越来越多的精索静脉曲张患者接受手术治疗,然而,临床对手术后患者的管理还重视不够。本文系统介绍了对精索静脉曲张手术后患者的疗效判断和后续治疗选择,包括观察随诊、非手术治疗方法和再手术。     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

Resveratrol attenuates high-fat diet-induced non-alcoholic steatohepatitis by maintaining gut barrier integrity and inhibiting gut inflammation through regulation of the endocannabinoid system

1. Download : Download high-res image (110KB)
2. Download : Download full-size image

     

The Prognostic Role of Peritumoral Edema in Patients with Newly Diagnosed Glioblastoma: A Retrospective Analysis

ObjectivePrevious studies on glioblastomas (GBMs) have not reached a consensus on peritumoral edema (PTE)’s influence on survival. This study evaluated the PTE index’s prognostic role in newly diagnosed GBMs using a well-designed method.MethodsSelected patients were reviewed after a rigorous screening process. Their general information was obtained from electronic medical records. The imaging metrics (MTD, TTM, TTE) representing tumor diameter, laterality, and PTE extent were obtained by manual measurement in Syngo FastView software. The PTE index was a ratio of TTE to MTD. Multiple variables were evaluated using analysis of variance and Cox regression model.ResultsOf 143 patients, 62 were included in this study. MGMT promoter methylation and tumor laterality were both independent prognostic factors (p = 0.020, 0.042; HR = 0.272, 2.630). The lateral tumors’ index was higher than that of the medial tumors (57.7% vs. 42.6%, p = 0.027). Low-index tumors were located in relatively medial positions compared with high-index tumors (TTM, 4.9 vs. 12.8, p = 0.032). This finding indicated that the PTE index tended to increase with tumor laterality. Moreover, the patients with low-index tumors had a significant survival disadvantage in the univariate analysis but not in the multivariate analysis (p = 0.023, 0.220). However, further analysis found that the combination of tumor laterality and PTE statistically stratified the survival outcome. The patients with lateral high-index tumors survived significantly longer (p = 0.022, HR = 1.927).ConclusionsIn contrast with the previous studies, this study recommends combining PTE and tumor laterality for survival stratification in newly diagnosed GBMs.