HIV-1 infection alters the retinol-binding protein:transthyretin ratio even in the absence of the acute phase response

The ratio of retinol-binding protein (RBP) to transthyretin (TTR) has been proposed as an indirect method with which to assess vitamin A status in the context of inflammation. Few studies have been conducted among adults, and none examined the effect of HIV-1 infection. Our goal was to assess the RBP:TTR ratio among adults, including the effects of HIV-1 and the acute phase response. We used data from a cross-sectional study of 600 Kenyan women, of whom 400 had HIV-1. The effect of vitamin A supplementation among the HIV-1-infected participants was subsequently assessed in a randomized trial. Among HIV-1-uninfected women without an acute phase response, a RBP:TTR cut-off value of 0.25 had approximately 80% sensitivity and specificity to detect vitamin A deficiency (retinol <0.70 micromol/L). No RBP:TTR cut-off value demonstrated both high sensitivity and specificity among HIV-1 infected women without evidence of inflammation. HIV-1 infection and advanced HIV-1 disease were associated with higher RBP:TTR ratios. The effect of HIV-1 was independent of the acute phase response, which also increased the RBP:TTR ratio. Serum retinol increased with vitamin A supplementation among those with a low RBP:TTR ratio, although the effect was small and was not present among those with concurrent inflammation. Thus, the RBP:TTR ratio has modest ability to predict vitamin A deficiency among healthy adults, but HIV-1 infection alters the ratio, even in the absence of the acute phase response. Our results raise questions about the utility of this measurement given the high prevalence of HIV-1 infection in areas where vitamin A deficiency is common.     

北京城区居民体质指数与慢性病危险因素关系分析

对 1 995～ 1 998年营养与食品安全所老年与临床营养室在北京地区慢性病社区防治研究中积累的1 2 4 6例 2 5～ 74岁居民的部分体检资料进行分析 ,观察不同人群体质指数 (BMI)、腰围 (WC)水平与慢性疾病相关因素 血清总胆固醇 (TC)、高密度脂蛋白胆固醇 (HDL C)、甘油三酯 (TG)、收缩压 (SBP)、舒张压 (DBP)、血糖 (FBG)及与高血压、高脂血症、糖尿病的检出率的关系。结果 :该人群超重及肥胖率男性为 41 7%及1 4 6 % ,女性为 32 0 %及 2 0 4%。超重及肥胖组高血压、高脂血症、糖尿病的检出率明显高于BMI正常组。相关分析结果表明BMI、WC与TC、TG、SBP、DBP呈显著正相关 ;与HDL C、HDL C TC呈显著负相关 ,WC与FBG呈显著正相关。提示为早期预防慢性病 ,应对BMI>2 4的人群给予充分关注     

Suppression of Anti-Inflammatory Mediators in Metabolic Disease May Be Driven by Overwhelming Pro-Inflammatory Drivers

Obesity is a multifactorial disease and is associated with an increased risk of developing metabolic syndrome and co-morbidities. Dysregulated expansion of the adipose tissue during obesity induces local tissue hypoxia, altered secretory profile of adipokines, cytokines and chemokines, altered profile of local tissue inflammatory cells leading to the development of low-grade chronic inflammation. Low grade chronic inflammation is considered to be the underlying mechanism that increases the risk of developing obesity associated comorbidities. The glucocorticoid induced protein annexin A1 and its N-terminal peptides are anti-inflammatory mediators involved in resolving inflammation. The aim of the current study was to investigate the role of annexin A1 in obesity and associated inflammation. To achieve this aim, the current study analysed data from two feasibility studies in clinical populations: (1) bariatric surgery patients (Pre- and 3 months post-surgery) and (2) Lipodystrophy patients. Plasma annexin A1 levels were increased at 3-months post-surgery compared to pre-surgery (1.2 ± 0.1 ng/mL, n = 19 vs. 1.6 ± 0.1 ng/mL, n = 9, p = 0.009) and positively correlated with adiponectin (p = 0.009, r = 0.468, n = 25). Plasma annexin A1 levels were decreased in patients with lipodystrophy compared to BMI matched controls (0.2 ± 0.1 ng/mL, n = 9 vs. 0.97 ± 0.1 ng/mL, n = 30, p = 0.008), whereas CRP levels were significantly elevated (3.3 ± 1.0 µg/mL, n = 9 vs. 1.4 ± 0.3 µg/mL, n = 31, p = 0.0074). The roles of annexin A1 were explored using an in vitro cell based model (SGBS cells) mimicking the inflammatory status that is observed in obesity. Acute treatment with the annexin A1 N-terminal peptide, AC2-26 differentially regulated gene expression (including PPARA (2.8 ± 0.7-fold, p = 0.0303, n = 3), ADIPOQ (2.0 ± 0.3-fold, p = 0.0073, n = 3), LEP (0.6 ± 0.2-fold, p = 0.0400, n = 3), NAMPT (0.4 ± 0.1-fold, p = 0.0039, n = 3) and RETN (0.1 ± 0.03-fold, p < 0.0001, n = 3) in mature obesogenic adipocytes indicating that annexin A1 may play a protective role in obesity and inflammation. However, this effect may be overshadowed by the continued increase in systemic inflammation associated with rapid tissue expansion in obesity.     

Concentration gradients in evaporating binary droplets probed by spatially resolved Raman and NMR spectroscopy

Understanding the evaporation process of binary sessile droplets is essential for optimizing various technical processes, such as inkjet printing or heat transfer. Liquid mixtures whose evaporation and wetting properties may differ significantly from those of pure liquids are particularly interesting. Concentration gradients may occur in these binary droplets. The challenge is to measure concentration gradients without affecting the evaporation process. Here, spectroscopic methods with spatial resolution can discriminate between the components of a liquid mixture. We show that confocal Raman microscopy and spatially resolved NMR spectroscopy can be used as complementary methods to measure concentration gradients in evaporating 1-butanol/1-hexanol droplets on a hydrophobic surface. Deuterating one of the liquids allows analysis of the local composition through the comparison of the intensities of the C–H and C–D stretching bands in Raman spectra. Thus, a concentration gradient in the evaporating droplet was established. Spatially resolved NMR spectroscopy revealed the composition at different positions of a droplet evaporating in the NMR tube, an environment in which air exchange is less pronounced. While not being perfectly comparable, both methods—confocal Raman and spatially resolved NMR experiments—show the presence of a vertical concentration gradient as 1-butanol/1-hexanol droplets evaporate.

Evaporating droplets occur in various contexts such as inkjet printing (1, 2), heat transfer, or daily phenomena such as drying coffee stains (3, 4). In many applications, such as painting (5), cleaning, gluing, or printing (6), where liquid mixtures are used, the evaporation of a droplet is a complex process because the concentration profile within the droplet varies over time. To improve the controllability and predictability of the technical processes, it is essential to characterize the transport phenomena during the drying process. The measurement of the droplet composition is a crucial element and has to be carried out with sufficient spatial and temporal resolution. In particular, spectroscopic methods are promising tools for contactless concentration measurements of liquid mixtures.The evaporation of a droplet is governed by physical properties such as surface tension (7), density (8–10), vapor pressure (11), and boiling temperature. Additionally, concentration gradients can evolve in liquid mixtures (12). These gradients are driven by thermal gradients due to the enthalpy of evaporation (droplet cooling) or on heated surfaces, by surface tension gradients induced by preferential evaporation of one component or by density gradients for droplets composed of liquids with different densities like water and glycerol (13). The evaporation rates of the components can vary over the droplet surface. For sessile droplets with contact angles smaller than 90°, for example, the evaporation rates are higher at the three-phase contact line (14). These thermal or surface tension gradients can induce flow inside the droplet called Marangoni flow. This flow leads to concentration gradients across the droplet (7–10). The direction of the gradient depends on the density and surface tension. A direct application of this principle is, for instance, Marangoni cleaning in semiconductor technology (15).The investigation of the composition of sessile drops on the microliter scale, as they occur in inkjet printing or other technical processes, poses a challenge because the typical length scales of interest are smaller than the capillary length. In bulk samples, the composition can be examined in a straightforward manner with chromatographic methods such as gas chromatography and high-performance liquid chromatography or spectroscopic methods such as NMR spectroscopy, infrared spectroscopy, and Raman spectroscopy. However, for the investigation of sessile droplets, a high spatial and temporal resolution is required. For this purpose, confocal Raman spectroscopy and spatially resolved NMR spectroscopy are powerful tools. For both techniques, concentration determination is straightforward if at least two signals of the components of interest are baseline-separated. NMR is intrinsically calibration-free, whereas Raman spectroscopy requires calibration through reference experiments (16–18). Both approaches allow the quantification of concentration gradients in sessile droplets, as is shown here.In Raman microscopy, good spatial resolution can be achieved in a confocal setup. The components of mixtures can be distinguished via specific vibrations for different functional groups or through a careful analysis of the Raman signals in the fingerprint region (<1,500 cm⁻¹). For example, binary mixtures of ethanol and water can be characterized in a straightforward manner (17). If, however, both liquids have a similar chemical structure, the discrimination of the components might be hampered by signal overlap in the C–H stretching region (2,800 to 3,000 cm⁻¹); e.g., in such cases, Raman signals in the fingerprint region (<1,500 cm⁻¹) might be used for the identification of the species. However, these signals often provide a poor signal-to-noise ratio, which makes large integration times necessary. Thus, the image rate or resolution is so low that even slow diffusion processes are hardly resolved. Here, Raman stable isotope probing (SIP), which has been developed to monitor metabolic processes in microbiology, offers a solution (19). The basic idea of Raman SIP is to replace the proton in the C–H with deuterium in one of the mixture components such that the C–D stretching region occurs at roughly 1/2 times the C–H stretching and falls into a region with very weak or even without signals from the protonated liquid component. Thus, the concentration in a binary mixture can be calculated in a straightforward manner from the ratio of the integrated Raman intensities ICD/ICH of the respective stretching vibrations.Compared to Raman microscopy, where localization is achieved by scanning the focal point across the region of interest, in NMR experiments localization is achieved by using magnetic field gradients. Usually, one avoids phase boundaries (especially liquid–gas interfaces) in NMR experiments because they disturb the magnetic field homogeneity and reduce the spectral quality in terms of line shape and baseline separation of the resonances. Nevertheless, it has been shown that MRI can be used to characterize freezing water droplets (20), the infiltration of water into asphalts (21), and the evaporation of sessile droplets from porous surfaces (22–24). Additionally, NMR can be used to quantify the composition of binary droplets during evaporation (25).Thus, the use of both complementary approaches to characterize evaporating binary droplets may be beneficial. In this article, we discuss the capabilities of Raman SIP and NMR techniques to analyze the evolution of the composition of an evaporating sessile binary droplet. As a model system, a binary mixture of 1-butanol and 1-hexanol was used. This mixture shows a low volatility such that the evaporation process can be captured with both Raman and NMR spectroscopies. With Raman spectroscopy, it was possible to observe concentration gradients of 1-butan-d₉-ol over the height of the droplet during evaporation. NMR techniques were examined in terms of the capability to observe the evaporation of 1-butanol and yield time-dependent droplet composition with spatially resolved ¹H-NMR spectra. Furthermore, the contours of the evaporating droplets were tracked by optical measurements to characterize the time-dependent changes in the droplet dimensions. Flows induced by the concentration gradients were confirmed by astigmatic particle tracking velocimetry.