The Use of Chitosan and Starch-Based Flocculants for Filter Backwash Water Treatment

Inorganic aluminum or iron salts supported with synthetic polymers are commonly used to eradicate colloidal particles from water in coagulation and flocculation processes. Nevertheless, these agents have several disadvantages, such as large volumes of sludge produced or environmental toxicity. Recently biodegradable polymers have been suggested as eco-friendly flocculants for water treatment. This study aimed to investigate the possibilities of using starch and chitosan and their oxidized derivatives as flocculants for filter backwash water treatment. Dialdehyde starch (DST) and dialdehyde chitosan (DCT) were synthesized by periodate oxidization of natural starch from corn and low molecular weight chitosan. The obtained materials have been characterized with scanning electron microscopy (SEM), ATR-FTIR spectroscopy, and thermogravimetric analysis (TGA). Furthermore, we studied the flocculation properties of polysaccharide flocculants in a series of jar tests. The effectiveness of chitosan and starched-based flocculants was compared to synthetic polymers commonly used to treat iron ions-rich filter backwash water. The environmental aspects of these chemicals, particularly the biodegradability of post-flocculation residues, were also addressed. It was found that oxidized starch and chitosan derivatives can be used as ecological flocculating materials to treat potable water or sludge.     

Increased postoperative myeloperoxidase concentration associated with low baseline antioxidant capacity as the risk factor of delirium after cardiac surgery

BackgroundThough risk factors of postoperative delirium are well described, its pathophysiology is still undiscovered. The primary objective of the current study is to assess whether increased pre- and postoperative myeloperoxidase (MPO) levels are associated with postoperative delirium in the population of cardiac surgery patients. The secondary objective is to evaluate the correlation between MPO levels and serum antioxidant capacity (AC).MethodsThe patients’ cognitive status was assessed one day preoperatively with the use of the Mini-Mental State Examination Test and the Clock Drawing Test. A diagnosis of major depressive disorder and anxiety disorders was established based on DSM-5 criteria. Blood samples for MPO and AC levels were collected both pre- and postoperatively. The Confusion Assessment Method for the Intensive Care Unit was used to screen for a diagnosis of delirium.ResultsDelirium occurred in 34% (61 of 177) of patients. Multivariable logistic regression analysis revealed that increased postoperative MPO concentration was independently associated with postoperative delirium development, and negatively correlated with lower baseline serum AC.ConclusionsCardiac surgery patients with less efficient antioxidative mechanisms experience a higher postoperative peak of serum MPO, which in turn may predispose to postoperative delirium development.

KEY MESSAGES

• MPO is a lysosomal enzyme with strong pro-oxidative and pro-inflammatory properties.
• Cardiac surgery patients who have increased concentration of postoperative MPO are at significantly higher risk of postoperative delirium development.
• This higher level of postoperative MPO is negatively correlated with baseline antioxidant capacity (AC).
• It can be hypothesized that individuals with decreased baseline AC experience a higher peak of MPO post-surgery due to less efficient antioxidative mechanisms, which in turn contributes to postoperative delirium development.

     

Problematic Internet Use,Psychopathology, Defense Mechanisms,and Coping Strategies: a Cross-Sectional Study from the United Arab Emirates

Psychiatric Quarterly - A number of studies point to a demonstrated relationship between problematic Internet use (PIU) and psychopathological variables. However, explorations of PIU in relation to...     

Bioconjugation Strategy for Ceramic Membranes Decorated with Candida Antarctica Lipase B—Impact of Immobilization Process on Material Features

A strategy for the bioconjugation of the enzyme Candida antarctica lipase B onto titania ceramic membranes with varied pore sizes (15, 50, 150, and 300 kDa) was successfully performed. The relationship between the membrane morphology, i.e.,the pore size of the ceramic support, and bioconjugation performance was considered. Owing to the dimension of the enzyme (~33 kDa), the morphology of the ceramics allowed (50, 150, and 300 kDa) or did not allow (15 kDa) the entrance of the enzyme molecules into the porous structure. Such a strategy made it possible to better understand the changes in the material (morphology) and physicochemical features (wettability, adhesiveness, and surface charge) of the samples, which were systematically examined. The silane functionalization and enzyme immobilization were accomplished via the covalent route. The samples were characterized after each stage of the modification, which was very informative from the material point of view. As a consequence of the modification, significant changes in the contact angle, roughness, adhesion, and zeta potential were observed. For instance, for the 50 kDa membrane, the contact angle increased from 29.1 ± 1.5° for the pristine sample to 72.3 ± 1.5° after silane attachment; subsequently, it was reduced to 57.2 ± 1.5° after the enzyme immobilization. Finally, the contact angle of the bioconjugated membrane used in the enzymatic process rose to 92.9 ± 1.5°. By roughness (S_q) controlling, the following amendments were noticed: for the pristine 50 kDa membrane, S_q = 1.87 ± 0.21 µm; after silanization, S_q = 2.33 ± 0.30 µm; after enzyme immobilization, S_q = 2.74 ± 0.26 µm; and eventually, after the enzymatic process, S_q = 2.37 ± 0.27 µm. The adhesion work of the 50 kDa samples was equal to 136.41 ± 2.20 mN m⁻¹ (pristine membrane), 94.93 ± 2.00 mN m⁻¹ (with silane), 112.24 ± 1.90 mN m⁻¹ (with silane and enzyme), and finally, 69.12 ± 1.40 mN m⁻¹ (after the enzymatic process). The materials and physicochemical features changed substantially, particularly after the application of the membrane in the enzymatic process. Moreover, the impact of ceramic material morphology on the zeta potential value is here presented for the first time. With an increase in the ceramic support cut-off, the amount of immobilized lipase rose, but the specific productivity was higher for membranes possessing smaller pores, owing to the higher grafting density. For the enzymatic process, two modes of accomplishment were selected, i.e., stirred-tank and cross-flow. The latter method was characterized by a much higher effectiveness, with a resulting productivity equal to 99.7 and 60.3 µmol h⁻¹ for the 300 and 15 kD membranes, respectively.     

Concentration-dependent HAT/ET mechanism of the reaction of phenols with 2,2-diphenyl-1-picrylhydrazyl (dpph˙) in methanol

The reaction of a 2,2-diphenyl-1-picrylhydrazyl radical (dpph˙) with phenols carried out in alcohols is a frequently used assay for estimation of the antiradical activity of phenolic compounds. The rates of reactions of dpph˙ with five phenols (ArOH: unsubstituted phenol, 4-hydroxyacetophenone, two calix[4]resorcinarenes and baicalein) measured in methanol indicate the different kinetics of the process for very diluted phenols compared to their non-diluted solutions. This effect was explained as dependent on the ratio [ArO⁻]/[ArOH] and for diluted ArOH corresponds to an increased contribution of much faster electron transfer (ET, ArO⁻/dpph˙) over the Hydrogen Atom Transfer (HAT, ArOH/dpph˙). Simplified analysis of the reaction kinetics resulted in estimation of k^ET/k^HAT ratios for each studied ArOH, and in calculation of the rate constants k^ET. Described results are cautionary examples of how the concentration of a phenol might change the reaction mechanism and the overall kinetics of the observed process.

Concentration dependent contribution of hydrogen atom transfer and electron transfer to the overall kinetics of reaction of phenols with a 2,2-diphenyl-1-picrylhydrazyl radical in methanol.     

The Performance of Concrete Made with Secondary Products—Recycled Coarse Aggregates,Recycled Cement Mortar,and Fly Ash–Slag Mix

The properties of cement concrete using waste materials—namely, recycled cement mortar, fly ash–slag, and recycled concrete aggregate—are presented. A treatment process for waste materials is proposed. Two research experiments were conducted. In the first, concretes were made with fly ash–slag mix (FAS) and recycled cement mortar (RCM) as additions. The most favorable content of the concrete additive in the form of RCM and FAS was determined experimentally, and their influence on the physical and mechanical properties of concrete was established. For this purpose, 10 test series were carried out according to the experimental plan. In the second study, concretes containing FAS–RCM and recycled concrete aggregate (RCA) as a 30% replacement of natural aggregate (NA) were prepared. The compressive strength, frost resistance, water absorption, volume density, thermal conductivity, and microstructure were researched. The test results show that the addition of FAS–RCM and RCA can produce composites with better physical and mechanical properties compared with concrete made only of natural raw materials and cement. The detailed results show that FAS–RCM can be a valuable substitute for cement and RCA as a replacement for natural aggregates. Compared with traditional cement concretes, concretes made of FAS, RCM, and RCA are characterized by a higher compressive strength: 7% higher in the case of 30% replacement of NA by RCA with the additional use of the innovative FAS–RCM additive as 30% of the cement mass.     

Cytotoxic Potential of Denture Adhesives on Human Fibroblasts—In Vitro Study

(1) In recent years, there has been a significant increase in the availability of denture adhesives for stabilizing removable dentures. The aim of the present study was to assess the cytotoxicity of three denture adhesives on human fibroblasts. (2) Methods: Three denture adhesives were analyzed. Fibroblast cultures were established for the study and control groups in order to assess the incidence of necrosis and to evaluate the microscopic intracellular alterations induced. Following incubation with (study groups) or without adhesives (control group), trypan blue dye exclusion assay was used to determine the number of viable and/or dead cells. Microscopic specimens were stained with haematoxylin and eosin, scanned, digitally processed and then analyzed by a histopathologist. (3) Results: All three denture adhesives analyzed demonstrated various toxic effects in vitro on human fibroblast: quantitative evaluation—45.87–61.13% reduction of cell viability (p = 0.0001) and slight to moderate cytotoxicity in qualitative evaluation. (4) Conclusions: Denture adhesive creams demonstrated a toxic effect on human fibroblasts in vitro in quantitative and qualitative evaluation. In vivo observations are needed to find out if denture adhesives present a cytotoxic effect in patients.     

Subsequent Malignant Neoplasm of Bone in Children and Adolescent—Possibility of Multimodal Treatment

Background: In recent years, modifications of treatment protocols introduced in pediatric oncology have resulted in a significant improvement in treatment outcomes. Unfortunately, the probability of subsequent malignant neoplasm (SMN) in this group of patients is 3 to 6 times higher than the general age-matched population. In this study, we sought to evaluate the treatment options for patients with secondary bone tumors after prior anti-cancer therapy. Materials and Methods: Twenty-four patients (median age 12.9 years) with subsequent malignant bone tumors were treated according to oncological guidelines for bone sarcoma during the period 1991–2020. All patients had a standard tumor imaging and laboratory evaluation. All toxicities were documented. Results: The median time from the first neoplasm to SMN was 7.6 years (range 2.4 to 16.3 years). All patients received chemotherapy and underwent surgery as a local control procedure. Two patients with Ewing sarcoma had additional radiation on the tumor bed. A complete response was achieved in 20 patients. With a median follow-up of 18.3 years (range 5.7 to 40.3 years), 18 patients (75%) are alive. The estimated 5-year post-subsequent bone malignant neoplasm survival was 74.5% (95% CI 55–95%). Fourteen patients required chemotherapy dose modification, and doxorubicin was discontinued in seven patients. One patient required a renal transplant two years after treatment. There were no other significant toxicities. Conclusions: The treatment of bone SMNs can be effective, although in many patients it is necessary to reduce the doses of drugs. Early detection and aggressive treatment can improve the outcome.     

The Effect of Low Doses of Zearalenone (ZEN) on the Bone Marrow Microenvironment and Haematological Parameters of Blood Plasma in Pre-Pubertal Gilts

The aim of this study was to determine whether low doses of zearalenone (ZEN) influence the carry-over of ZEN and its metabolites to the bone marrow microenvironment and, consequently, haematological parameters. Pre-pubertal gilts (with a body weight of up to 14.5 kg) were exposed to daily ZEN doses of 5 μg/kg BW (group ZEN5, n = 15), 10 μg/kg BW (group ZEN10, n = 15), 15 μg/kg BW (group ZEN15, n = 15), or were administered a placebo (group C, n = 15) throughout the entire experiment. Bone marrow was sampled on three dates (exposure dates 7, 21, and 42—after slaughter) and blood for haematological analyses was sampled on 10 dates. Significant differences in the analysed haematological parameters (WBC White Blood Cells, MONO—Monocytes, NEUT—Neutrophils, LYMPH—Lymphocytes, LUC—Large Unstained Cells, RBC—Red Blood Cells, HGB—Haemoglobin, HCT—Haematocrit, MCH—Mean Corpuscular Volume, MCHC—Mean Corpuscular Haemoglobin Concentrations, PLT—Platelet Count and MPV—Mean Platelet Volume) were observed between groups. The results of the experiment suggest that exposure to low ZEN doses triggered compensatory and adaptive mechanisms, stimulated the local immune system, promoted eryptosis, intensified mycotoxin biotransformation processes in the liver, and produced negative correlations between mycotoxin concentrations and selected haematological parameters.