Comparison of revision strategies for failed C2-posterior cervical pedicle screws: a biomechanical study

Study purpose

With increasing usage within challenging biomechanical constructs, failures of C2 posterior cervical pedicle screws (C2-pCPSs) will occur. The purpose of the study was therefore to investigate the biomechanical characteristics of two revision techniques after the failure of C2-pCPSs.

Materials and methods

Twelve human C2 vertebrae were tested in vitro in a biomechanical study to compare two strategies for revision screws after failure of C2-pCPSs. C2 pedicles were instrumented using unicortical 3.5-mm CPS bilaterally (Synapse/Synthes, Switzerland). Insertion accuracy was verified by fluoroscopy. C2 vertebrae were potted and fixed in an electromechanical testing machine with the screw axis coaxial to the pullout direction. Pullout testing was conducted with load and displacement data taken continuously. The peak load to failure was measured in newtons (N) and is reported as the pullout resistance (POR). After pullout, two revision strategies were tested in each vertebra. In Group-1, revision was performed with 4.0-mm C2-pCPSs. In Group-2, revision was performed with C2-pedicle bone-plastic combined with the use of a 4-mm C2-pCPSs. For the statistical analysis, the POR between screws was compared using absolute values (N) and the POR of the revision techniques normalized to that of the primary procedures (%).

Results

The POR of primary 3.5-mm CPSs was 1,140.5 ± 539.6 N for Group-1 and 1,007.7 ± 362.5 N for Group-2; the difference was not significant. In the revision setting, the POR in Group-1 was 705.8 ± 449.1 N, representing a reduction of 38.1 ± 32.9 % compared with that of primary screw fixation. For Group-2, the POR was 875.3 ± 367.9 N, representing a reduction of 13.1 ± 23.4 %. A statistical analysis showed a significantly higher POR for Group-2 compared with Group-1 (p = 0.02). Although the statistics showed a significantly reduced POR for both revision strategies compared with primary fixation (p < 0.001/p = 0.001), the loss of POR (in %) in Group-1 was significantly higher compared with the loss in Group-2 (p = 0.04).

Conclusions

Using a larger-diameter screw combined with the application of a pedicle bone-plastic, the POR can be significantly increased compared with the use of only an increased screw diameter.     

In vivo analysis of cervical kinematics after implantation of a minimally constrained cervical artificial disc replacement

Introduction

To better understand cervical kinematics following cervical disc replacement (CDR), the in vivo behavior of a minimally constrained CDR was assessed.

Methods

Radiographic analysis of 19 patients undergoing a 1-level CDR from C4–5 to C6–7 (DISCOVER, Depuy-Spine, USA) was performed. Neutral–lateral and flexion–extension radiographs obtained at preop, postop and late follow-up were analyzed for segmental angle and global angle (GA C2–7). Flexion–extension range of motion was analyzed using validated quantitative motion analysis software (QMA®, Medical Metrics, USA). The FSU motion parameters measured at the index and adjacent levels were angular range of motion (ROM), translation and center of rotation (COR). Translation and COR were normalized to the AP dimension of the inferior endplate of the caudal vertebra. All motion parameters, including COR, were compared with normative reference data.

Results

The average patient age was 43.5 ± 7.3 years. The mean follow-up was 15.3 ± 7.2 months. C2–7 ROM was 35.9° ± 15.7° at preop and 45.4° ± 13.6° at follow-up (?p < .01). Based on the QMA at follow-up, angular ROM at the CDR level measured 9.8° ± 5.9° and translation was 10.1 ± 7.8 %. Individuals with higher ROM at the CDR level had increased translation at that level (p < .001, r = 0.97), increased translation and ROM at the supra-adjacent level (p < .001, r = .8; p = .005, r = .6). There was a strong interrelation between angular ROM and translation at the supra-adjacent level (p < .001, r = .9) and caudal-adjacent level (p < .001, r = .9). The location of the COR at the CDR- and supra-adjacent levels was significantly different for the COR-X (p < .001). Notably, the COR-Y at the CDR level was significantly correlated with the extent of CDR-level translation (p = .02, r = .6). Shell angle, which may be influenced by implant size and positioning had no impact on angular ROM but was correlated with COR-X (p = .05, r = ?.6) and COR-Y (p = .04, r = ?.5).

Conclusion

The COR is an important parameter for assessing the ability of non-constrained CDRs to replicate the normal kinematics of a FSU. CDR size and location, both of which can impact shell angle, may influence the amount of translation by affecting the location of the COR. Future research is needed to show how much translation is beneficial concerning clinical outcomes and facet loading.     

Causes of dissatisfaction after laparoscopic fundoplication: the impact of new symptoms, recurrent symptoms, and the patient experience

Background

Although laparoscopic fundoplication effectively alleviates gastroesophageal reflux disease (GERD) in the great majority of patients, some patients remain dissatisfied after the operation. This study was undertaken to report the outcomes of these patients and to determine the causes of dissatisfaction after laparoscopic fundoplication.

Methods

All patients undergoing laparoscopic fundoplication in the authors’ series from 1992 to 2010 were evaluated for frequency and severity of symptoms before and after laparoscopic fundoplication, and their experiences were graded from “very satisfying” to “very unsatisfying.” Objective outcomes were determined by endoscopy, barium swallow, and pH monitoring. Primary complaints were derived from postoperative surveys. Median data are reported.

Results

Of the 1,063 patients undergoing laparoscopic fundoplication, 101 patients reported dissatisfaction after the procedure. The follow-up period was 33 months. The dissatisfied patients (n = 101) were more likely than the satisfied patients to have postoperative complications (9 vs 4 %; p < 0.05) and to have undergone a prior fundoplication (22 vs 11 %; p < 0.05). For the dissatisfied patients, heartburn decreased in frequency and severity after fundoplication (p < 0.05) but remained notable. Also for the dissatisfied patients, new symptoms (gas bloat/dysphagia) were the most prominent postoperative complaint (59 %), followed by symptom recurrence (23 %), symptom persistence (4 %), and the overall experience (14 %). Primary complaints of new symptoms were most common within the first year of follow-up assessment and less frequent thereafter. Primary complaints of recurrent symptoms generally occurred more than 1 year after fundoplication.

Conclusions

Dissatisfaction is uncommon after laparoscopic fundoplication. New symptoms, such as dysphagia and gas/bloating, are primary causes of dissatisfaction despite general reflux alleviation among these patients. New symptoms occur sooner after fundoplication than recurrent symptoms and may become less common with time.     

Bone structure and geometry in young men: The influence of smoking,alcohol intake and physical activity

BackgroundThe development of osteoporosis is influenced by peak bone mass attained in youth — the influence of lifestyle factors upon which is poorly described, especially amongst males. We sought to address this issue in a large scale study.MethodsHip bone mineral density (dual X-ray absorptiometry, DXA), bone microarchitecture (calcaneal quantitative ultrasound, QUS) and femoral geometry (magnetic resonance imaging, MRI) were characterised in 723 healthy male military recruits (mean ± S.E. age 19.92 ± 0.09 years [range 16–18 years], height 177.67 ± 0.24 cm, weight 73.17 ± 0.37 kg) on entry to UK Army training. Association was sought with prior physical activity, smoking status and alcohol intake.ResultsDXA measures were made in 651, MRI measures in 650, and QUS measures in 572 recruits. Increasing levels of weight-bearing physical activity enhanced periostial bone apposition, increases in both total hip and femoral neck bone mineral density (BMD; p ≤ 0.0001 in both cases), and cortical [p < 0.0001] and periostial bone volumes [p = 0.016]. Smoking habit was associated with preserved bone geometry, but worse BMD [p = 0.0001] and QUS characteristics [p ≤ 0.0005]. Moderate alcohol consumption was associated with greater BMD [p ≤ 0.015].ConclusionsWhilst exercise (and perhaps moderate alcohol intake) is beneficial to bone morphometry, smoking is detrimental to bone mineral density in young males notable for the likely short duration of smoking to influence skeletal properties. However, differences in socio-economic status, lifestyle and related environmental factors may to some extent confound our results.     

Effect of natural gel product on bovine dentin erosion in vitro

Objective

To evaluate the efficacy of Neem (Azadirachta indica) experimental gel for the prevention of erosive wear on bovine dentin, in vitro.

Material and Methods

One hundred dentin blocks were allocated into 5 experimental groups (20 samples each): C (control group, without gel); CG (control group, only base gel); F (fluoride gel, 1.23% NaF; pH 4.1, Dentsply; Brazil); N (Neem gel, 10% neem extract; pH 4.1, manipulation); NF (Neem+fluoride gel, 10% Neem extract and 1.23% NaF; pH 4.1, manipulation). The blocks were stored in artificial saliva for 24 hours. After this, they were submitted to six alternating re- and demineralization cycles. The blocks were analyzed for wear (profilometry). The results were submitted to statistical analysis by ANOVA and Tukey tests (P<0.05).

Results

The mean wear (±SD, µm) was shown as follows in groups: C (13.09±0.99), CG (10.60±1.99), F (10.90±1.44), N (12.68±1.13) and NF (10.84±1.65). All gels showed some preventive action when compared with control group. However, significant differences were found only between Neem+fluoride gel and fluoride gel.

Conclusion

A single application of a neem-containing fluoride gel reduced dentin erosion, thus it is a possible alternative in reducing dental wear. Further research should investigate the action mechanism and the synergism between them.