Ketoprofen Versus Paracetamol in the Treatment of Acute Migraine

The efficacy and safety of ketoprofen and paracetamol were compared for the treatment of acute migraine in a randomized, double-blind study of 64 patients. Thirty-four patients received ketoprofen 100 mg intramuscularly, and 30 patients received paracetamol 500 mg intramuscularly. Partial or complete relief of pain and other symptoms was achieved 15 to 20 minutes after administration in the ketoprofen group and within 35 minutes in the paracetamol group. Complete relief of pain was achieved within 30 to 40 minutes after ketoprofen in 28 patients (82.5%) compared to 5 patients (17.5%) in the paracetamol group. Six of the patients treated with ketoprofen needed a second dose for complete relief of pain during the 4-hour follow-up period. Side effects were rare and minimal. Our findings suggest that ketoprofen produced statistically significant benefit in the treatment of acute migraine.     

Insights into Mechanisms of Cisplatin Resistance and Potential for Its Clinical Reversal

Cisplatin in combination with other cytotoxic agents is the backbone for a potential cure of testicular germ cell neoplasms and is a critical factor in the substantial activity observed in the treatment of small cell lung cancer, bladder cancer, and ovarian germ cell tumors. Resistance to cisplatin at the onset of treatment or at relapse limits its curative potential, however. Laboratory studies using both cells selected for cisplatin resistance by exposure to sublethal concentrations and biopsy specimens from patients' tumors provide insights for the potential mechanisms of resistance. The mechanisms identified in vitro include a complex and wide array of related and unrelated pathways such as alterations in cellular drug transport, enhanced DNA repair dependent and independent of signal transduction pathways, and enhanced intracellular detoxification such as glutathione and metallothionein systems. Studies of these mechanisms have identified a number of agents with known potential for administration to humans and that reverse cisplatin resistance in vitro; for example, reversal of cellular accumulation defects by dipyridamole; inhibition of DNA repair by hydroxyurea, pentoxifylline, and novobiocin; inhibition of the glutathione system by ethacrynic acid and buthionine sulfoximine; and inhibition of signal transduction pathways by cyclosporine, tamoxifen, and calcium channel-blocking agents. Current phase I clinical trials are focusing on the most effective doses and schedules to administer these agents in combination with cisplatin. Initial uncontrolled trials in limited numbers of patients suggest that the addition of modulators of cisplatin has the potential to reverse resistance in patients previously failing therapy. Another promising avenue for circumventing cisplatin resistance is the development of noncross-resistant platinum analogs.     

Cor triatriatum associated with partial anomalous pulmonary venous connection to the coronary sinus: Echocardiographic and angiocardiographic features

Summary An infant girl is described who had cor triatriatum and partial anomalous pulmonary venous connection of the left pulmonary veins to the coronary sinus, the first report of this combination of lesions. The infant also had a Dandy-Walker malformation and multiple facial and intrathoracic hemangiomas. The cardiac diagnosis was made by two-dimensional echocardiography. Cardiac catheterization and angiography confirmed the findings and also demonstrated a persistent left superior vena cava draining to the coronary sinus. The infant underwent successful surgical repair. Partial anomalous pulmonary venous connection and left superior vena cava not infrequently are associated with cor triatriatum. Although two-dimensional echocardiography is sensitive for the detection of cor triatriatum, preoperative cardiac catheterization is necessary to identify unequivocally systemic and pulmonary venous connections.     

Mikrofrakturierung bei fokalem Knorpelschaden

The microfracture technique and spongiolization using Pridie drilling are the most commonly used and highly cost-efficient operative therapies for restoration of cartilage in Germany. Microfracturing can be performed arthroscopically in various joints including the knee, ankle, elbow, and shoulder joint. Specifically designed instruments are recommended for this procedure. Steadman recently reported excellent results in a series of 72 patients undergoing microfracturing with a mean follow-up of 11 years showing consistent and long-term reduction of weight-bearing pain and swelling as well as improvement of daily activities. Ideal indications for this easy arthroscopic procedure of microfracture treatment include focal lesions up to 4 cm². Some studies have demonstrated that microfracturing results not merely in the formation of fibrocartilage but also in the induction of hyaline cartilage with superior properties.     

Der Einsatz des Prophy-Jet®-Gerätes zur Schmelzpolitur nach der Bracketentfernung

Zusammenfassung In einer In-vitro-Studie wurde die Einsatzfähigkeit des Prophy-Jet-^®-Gerätes für die Schmelzpolitur nach Bracketentfernung untersucht. In die Studie wurden drei verschieden stark gefüllte orthodontische Kleber einbezogen: Concise^®, Genie^® und Mono Lok^®. Alle Proben wurden rasterelektronenoptisch untersucht und fotografisch dokumentiert in Vergrößerungen zwischen 20- und 10 000fach. Die Oberflächenanalyse ergab, daß das Prophy-Jet^®-Gerät allein zur Schmelzpolitur nach Bracketentfernung nicht ausreicht, um unter klinisch vertretbarem Zeitaufwand (1 Minute/Zahn) eine kunststofffreie Schmelzoberfläche zu erzielen. Nach konventioneller makroskopischer Vorreinigung mit Scalern oder rotierenden Hartmetallfinierern zeigten sich nach fünfsekündiger Prophy-Jet^®-Bestrahlung noch geringe Kleberreste. Nach zehnsekündiger Expositionsdauer waren beim Mono Lok^®-Adhäsiv keine Kleberreste mehr nachweisbar, beim Concise^®-bzw. Genie^®-Adhäsiv fanden sich noch vereinzelte geringe Kleberinseln. Das Prophy-Jet^®-Gerät erscheint zur Unterstützung der Schmelzpolitur nach Bracketentfernung sinnvoll; eine sorgfältige Vorreinigung mit Hand- oder rotierenden Instrumenten ist jedoch erforderlich, um eine weitgehende Adhäsivreduktion zu erreichen. Die konventionelle Gummi- und Bimssteinpolitur kann nach 20sekündiger Prophy-Jet^®-Bestrahlung entfallen.

---

Summary The purpose of this in vitro investigation was to ascertain the effects of the Prophy-Jet^® air-powder abrasive system for enamel polishing after debonding. Three adhesives differing in filler content were included in this study: Concise^®, Genie^®, and Mono Lok^®. All specimens were examined by scanning electron microscopy and documented photographically at magnifications from 20 to 10 000. Surface analysis showed that using the Prophy-Jet^® exclusively is not sufficient to produce a clean and smooth enamel surface without residual adhesive after debonding and after one minute of exposure time, as might be justifiable in a clinical situation. After macroscopic conventional clean-up with scalers or rotary finishing instruments and five seconds of exposure time to the Prophy-Jet^® some occasional adhesive remnants could be located. After ten seconds of Prophy-Jet^® treatment all Mono Lok^®-adhesive was removed from the enamel surface; in the Concise^® and Genie^®-group few isolated adhesive remnants could be detected. The Prophy-Jet^® air-powder abrasive system was found to be efficient in supporting enamel polishing after debonding; but an accurate pretreatment with scalers or rotary finishing instruments is essential to achieve an extensive reduction of adhesive. Final polishing of the enamel surface with rubber wheels or prophy cup and pumice can be omitted after treatment with the Prophy-Jet^® for 20 seconds.

---

Résumé Le but de ce travail était d'éxaminer à l'aide d'une étude in vitro, l'emploi du Prophy Jet^® pour le polissage de l'émail après l'arrachage des brackets. Dans l'étude on a analysé trois substances adhésives différentes: Concise^®, Genie^® et Mono Lok^®. Après avoir examiné les spécimens par le microscope électronique à balayage, on les a documentés à l'aide de photos d'un grossissement de 20 à 10 000. L'analyse de la surface montre que la seule application du Prophy Jet^® (après l'arrachage des brackets) ne suffit pas pour obtenir une surface d'émail sans substance adhésive en un temps clinique d'une minute par dent. Après prétraitement macroscopique selon la méthode conventionnelle (scaler ou instruments montés sur tour) il demeurait encore de petits restes de la substance adhésive après l'application du Prophy Jet^® pendant cinq secondes. Après une durée d'application de dix secondes, on ne pouvait pas déceler de restes de Mono Lok^®, tandis qu'il y avait sporadiquement des restes de Concise^® et Genie^®. Ces résultats indiquent, que le Prophy Jet^® est efficace pour le polissage de l'émail après l'arrachage des brackets, mais on a tout de même besoin d'un nettoyage précédent minutieux avec des instruments convenables (scaler ou instruments montés sur le tour) pour obtenir une réduction considérable de la substance adhésive. On peut renoncer au polissage conventionnel à l'aide de caoutchouc ou de la pierre ponce après l'application du Prophy Jet^® pendant 20 secondes.

---

---

Vortrag auf der wissenschaftlichen Jahrestagung der Deutschen Gesellschaft für Kieferorthopädie 1985.