A Novel Preparation of Special-Shaped Phosphors-in-Glass by Gel Casting with Isobam for High-Power WLEDs Lighting

Phosphors-in-glass (PiGs) regarded as a promising phosphor-converter for white light emitting diodes (WLEDs) is being researched widely. However, there are few reports on the effect of changing the shape of PiGs on the color rendering index (CRI) and heat dissipation of WLEDs. In this paper, gel casting with Isobam was first attempted in preparing special-shaped PiGs successfully. It exhibited that 76 wt.% was the optimum solid content based on the rheological properties of slurry and the shrinkage of green bodies. The sintering rate should be kept at a low speed and glass transition temperature (Tg) of glass powders must be higher than sublimation temperatures (Ts) of APS and Isobam. The CRI of PiGs was increased by about 27% after changing the shape of PiGs from cylinder to dome. Most importantly, operating temperature also reduced effectively the increase of the surface area of PiGs. Therefore, changing the shape of PiGs by gel casting with Isobam is a creative way for high-power WLEDs lighting.     

Microstructure and Friction Properties of CoCrFeMnNiTix High-Entropy Alloy Coating by Laser Cladding

To enhance the friction and wear properties of 40Cr steel’s surface, CoCrFeMnNi high-entropy alloy (HEA) coatings with various Ti contents were prepared using laser cladding. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) were used to characterize the phase composition, microstructure, and chemical composition of the samples. The findings demonstrated that the CoCrFeMnNiTi_x HEA coatings formed a single FCC phase. Fe₂Ti, Ni₃Ti, and Co₂Ti intermetallic compounds were discovered in the coatings when the molar ratio of Ti content was greater than 0.5. The EDS findings indicated that Cr and Co/Ni/Ti were primarily enriched in the dendrite and interdendrite, respectively. Ti addition can effectively enhance the coating’s mechanical properties. The hardness test findings showed that when the molar ratio of Ti was 0.75, the coating’s microhardness was 511 HV0.5, which was 1.9 times the hardness of the 40Cr (256 HV0.5) substrate and 1.46 times the hardness of the CrCrFeMnNi HEA coating (348 HV0.5). The friction and wear findings demonstrated that the addition of Ti can substantially reduce the coating’s friction coefficient and wear rate. The coating’s wear resistance was the best when the molar ratio of Ti was 0.75, the friction coefficient was 0.296, and the wear amount was 0.001 g. SEM and 3D morphology test results demonstrated that the coating’s wear mechanism changed from adhesive wear and abrasive wear to fatigue wear and abrasive wear with the increase in Ti content.     

Research on Hyperparameter Optimization of Concrete Slump Prediction Model Based on Response Surface Method

In this paper, eight variables of cement, blast furnace slag, fly ash, water, superplasticizer, coarse aggregate, fine aggregate and flow are used as network input and slump is used as network output to construct a back-propagation (BP) neural network. On this basis, the learning rate, momentum factor, number of hidden nodes and number of iterations are used as hyperparameters to construct 2-layer and 3-layer neural networks respectively. Finally, the response surface method (RSM) is used to optimize the parameters of the network model obtained previously. The results show that the network model with parameters obtained by the response surface method (RSM) has a better coefficient of determination for the test set than the model before optimization, and the optimized model has higher prediction accuracy. At the same time, the model is used to evaluate the influencing factors of each variable on slump. The results show that flow, water, coarse aggregate and fine aggregate are the four main influencing factors, and the maximum influencing factor of flow is 0.875. This also provides a new idea for quickly and effectively adjusting the parameters of the neural network model to improve the prediction accuracy of concrete slump.     

The role of toll-like receptors (TLRs) in pan-cancer

BackgroundToll-like receptors (TLRs) are important components of the innate and adaptive immune systems, and abnormal TLR expression has been linked to a variety of cancers. However, there was a lack of clarity on the association of TLR stimulation with the carcinogenesis of cancer. The study''s goal was to analyse the clinical importance of TLRs expression at the mRNA level in pan-cancer datasets, as well as the link between TLR expression and carcinogenesis, progression, and clinical prognosis.MethodsThe expression profile of TLRs derived from UCSC pan-cancer data was analysed in multiple dimensions, including clinical analysis, immunological subtype analysis, tumour microenvironment (TME) analysis, tumour stem cell correlation analysis, and drug sensitivity analysis. Additionally, we analyse protein-protein interactions, functional enrichment, and chromatin accessibility, as well as TLR expression in single-cell sequencing data.ResultsOur multi-omics analysis results imply that TLRs may operate as a biological marker for carcinogenesis and progression, a potential target for anti-tumour therapy, and a prognostic biomarker, laying the theoretical groundwork for future translational medicine research.ConclusionTLRs are involved in the formation of malignancies and can be explored in further detail as potential prognostic indicators.

Key Messages

• Toll-like receptors (TLRs) are key factors in the process of the innate and adaptive immune response, and their aberrant expression of TLRs have been widely reported in various cancer. However, the association between TLRs stimulation and tumorigenesis of cancer has not been well clarified.
• In this study, in the pan-cancer data, integrated TLR family gene expression analysis, clinical correlation analysis, immune subtype correlation analysis, tumour microenvironment correlation analysis, tumour stem cell correlation analysis, and drug sensitivity correlation analysis were performed.
• TLRs play an important role in the development of tumours and can be studied in depth as potential prognostic markers.

     

胎儿端脑突触素表达和突触发育的研究

为了探讨突触素(SYN)在不同周龄阶段胎儿端脑额叶中的表达与胎儿额叶皮质突触发育的关系,本研究采用免疫组织化学方法观察突触素在不同周龄阶段胎儿额叶的表达水平,利用计算机图像分析技术测量不同周龄阶段胎儿额叶突触素表达的平均光密度;同时取材、常规电镜技术处理、透射电镜观察额叶突触发育的超微结构变化。结果显示:(1)光镜下各组均可见SYN免疫阳性产物主要表达于胎儿的额叶皮层,其表达量随周龄的增加而增强,各组间呈现显著性差异(P<0.05),其中16～24周胎儿额叶的阳性产物位于神经元的胞浆内,呈均匀的浅黄色,神经元突起内未见阳性产物;25～29周额叶的阳性产物呈黄色,在胞浆和突起内均可见,但阳性产物的量却下降;而30～39周额叶的SYN阳性产物呈棕黄色的点状或颗粒状,主要位于神经元的突起内,神经元胞浆内未见阳性产物,阳性产物的量显著增加;(2)透射电镜下19～36周胎儿大脑额叶均可见到突触样结构,随着周龄的增加,突触的数量逐渐增多,结构逐渐清晰和完整。上述结果提示SYN的表达可以反映胎儿神经系统发育的程度,SYN的表达与突触的发育是一致的;SYN在胎儿大脑额叶的表达部位经历由神经元胞浆内表达为主到神经元终末表达为主的这一过程,可能是由于SYN先是在神经元胞浆内合成,再随着神经元的发育而逐步转移到神经元突起的末梢部位。     

PdPbAg alloy NPs immobilized on reduced graphene oxide/In2O3 composites as highly active electrocatalysts for direct ethylene glycol fuel cells

rGO-modified indium oxide (In₂O₃) anchored PdPbAg nanoalloy composites (PdPbAg@rGO/In₂O₃) were prepared by a facile hydrothermal, annealing and reduction method. Electrochemical tests showed that the as-prepared trimetallic catalyst exhibited excellent electrocatalytic activity and high resistance to CO poisoning compared with commercial Pd/C, mono-Pd and different bimetallic catalysts. Specifically, PdPbAg@rGO/In₂O₃ has the highest forward peak current density of 213.89 mA cm⁻², which is 7.89 times that of Pd/C (27.07 mA cm⁻²). After 3600 s chronoamperometry (CA) test, the retained current density of PdPbAg@rGO/In₂O₃ reaches 78.15% of the initial value. Its excellent electrocatalytic oxidation performance is attributed to the support with large specific surface area and the strong synergistic effect of PdPbAg nanoalloys, which provide a large number of interfaces and achievable reactive sites. In addition, the introduction of rGO into the In₂O₃ matrix contributes to its excellent electron transfer and large specific surface area, which is beneficial to improving the catalytic ability of the catalyst. The study of this novel composite material provides a conceptual and applicable route for the development of advanced high electrochemical performance Pd-based electrocatalysts for direct ethylene glycol fuel cells.

rGO-modified indium oxide (In₂O₃) anchored PdPbAg nanoalloy composites (PdPbAg@rGO/In₂O₃) were prepared by a facile hydrothermal, annealing and reduction method.     

The diagnostic efficacy of diffusion tensor imaging generated by gadolinium-based magnetic resonance imaging for patients with chronic kidney disease

Background:Chronic kidney disease (CKD) can lead to systemic inflammatory responses and other cardiovascular disease. Diffusion tensor imaging findings generated by gadolinium-based MRI (DTI-GBMRI) is regarded as a standard method for assessing the pathology of CKD. To evaluate the diagnostic value of DTI-GBMRI for renal histopathology and renal efficiency, renal fibrosis and damage, noninvasive quantification of renal blood flow (RBF) were investigated in patients with CKD.Methods:CKD patients (n = 186) were recruited and underwent diagnosis of renal diffusion tensor imaging findings generated by MRI (DTI-MRI) or DTI-GBMRI to identify the pathological characteristics and depict renal efficiency. The cortical RBFs and estimated glomerular filtration rate were compared in CKD patients undergone DTI-GBMRI (n = 92) or DTI-MRI (n = 94).Results:Gadolinium enhanced the diagnosis generated by DTI-MRI in renal fibrosis, renal damage, and estimated glomerular filtration rate. The superiority in sensitivity and accuracy of the DTI-GBMRI method in assessing renal function and evaluating renal impairment was observed in CKD patients compared with DTI-MRI. Outcomes demonstrated that DTI-GBMRI had higher accuracy, sensitivity, and specificity than DTI-MRI in diagnosing patients with CKD.Conclusion:In conclusion, DTI-GBMRI is a potential noninvasive method for measuring renal function, which can provide valuable information for clinical CKD diagnosis.     

糖尿病神经病变的评估和预防

糖尿病神经病变是糖尿病最常见和最复杂的并发症之一,可累及全身神经系统的任何部分,大约发生在近50%的糖尿病患者中.通常在1型糖尿病患者中,它出现较晚,而在2型糖尿病的早期就能发现.     

大学生不安全依恋与拖延的关系：正念与自我控制的作用路径

背景 预防和干预大学生的拖延行为具有重要现实意义。已有研究表明,正念、自我控制、不安全依恋和拖延两两相关,但目前关于不安全依恋对拖延的作用机制仍不清楚,且缺乏二者间作用路径的研究。目的 探讨大学生不安全依恋对拖延的影响以及正念与自我控制的作用路径,以期为大学生拖延问题的干预提供参考。方法 于2023年2月—4月,采用整群随机抽样的方法,选取广东省4所高校的514名在校大学生为研究对象。采用非理性拖延量表（IPS）、成人依恋量表（AAS）、正念注意觉知量表（MAAS）和简式自我控制量表（BSCS）进行调查。使用Pearson相关分析考查各量表评分的相关性,使用Bootstrap法进行中介效应检验。结果 大学生AAS评分与IPS评分呈正相关（r=0.382,P<0.01）,与MAAS和BSCS评分均呈负相关（r=-0.242、-0.353,P均<0.01）;IPS评分与MAAS和BSCS评分均呈负相关（r=-0.314、-0.682,P均<0.01）;MAAS评分与BSCS评分呈正相关（r=0.439,P<0.01）。不安全依恋正向预测拖延（β=0.377,P<0.01）,自我控制是不安全依恋与拖延之间的作用路径,间接效应值为0.163（95% CI：0.105~0.223）,占总效应的43.24%,且正念与自我控制可能是不安全依恋与拖延之间的链式作用路径,间接效应值为0.056（95% CI：0.028~0.089）,占总效应的14.85%。结论 不安全依恋可以直接影响大学生拖延,也可以通过自我控制的独立作用路径及正念与自我控制的链式作用路径影响大学生拖延。