Smooth flexible versus active tapered shaft design using NiTi rotary instruments

AIM: The aim of this study was to evaluate the influence of a smooth flexible versus active tapered shaft design on canal preparation by NiTi rotary techniques. METHODOLOGY: A XMCT-scanner (SkyScan 1072) and developed software (Bergmans et al. 2001) were used to nondestructively analyze the mesial canals of 10 extracted mandibular molars in 3D with a spatial resolution of 30 microm. Specimens (n = 10 per group) were scanned before (PRE) and after (POST) preparation using Lightspeed (smooth flexible) or GT-rotary (active tapered) files. Numerical values for volumes, dentine removal (net) transportation and centring ability were obtained in addition to a visual inspection on canal aberrations. Data were analyzed by Shapiro Wilk test, multiway factorial anova, Tukey-Kramer test, Wilcoxon test and t-test. RESULTS: Results indicated that the active tapered shaft removed significantly more dentine in the middle to apical portion of the root compared to the smooth flexible design. Both groups demonstrated some straightening, but no significant differences were found with respect to instrument types. However, absolute values for net transportation and centering ratio were small and no canal aberrations could be found. CONCLUSIONS: The smooth flexible shaft design did not improve the morphological characteristics of canal preparation by NiTi rotary instruments when compared with the active tapered design. Therefore, system selection should be based upon other criteria.     

Endoscopic mitral valve repair: feasible,reproducible, and durable

OBJECTIVE: We sought to document the feasibility, safety, and effectiveness of performing mitral valve repair using a totally endoscopic approach. METHODS: Between February 1997 and October 1, 2001, 187 patients underwent totally endoscopic mitral valve repair at our institution. The mean age was 60.7 +/- 13.1 years, and 62% were male. Median preoperative functional class and degree of mitral regurgitation were II and 4, respectively. Data collection included an institutional protocol assessing procedure-related pain, cosmesis, and functional recovery. Statistical analysis included Kaplan-Meier and Cox regression methods. Mean follow-up was 19 +/- 15.2 months and was 100% complete. RESULTS: Associated atrial procedures were performed in 9.1% (n = 17) of the patients. Two patients required intraoperative conversion to sternotomy. Thoracoscopic re-evaluation for suspected bleeding (n = 19) was part of our aggressive postoperative management. One patient required sternotomy for control of bleeding. Hospital mortality included 1 (0.5%) patient and was not technology related. There were 1 early and 6 late reoperations, 4 of which were due to endocarditis. No risk factors for repair failure could be detected. Freedom from mitral valve reoperation at 4 years was 93.3% +/- 2.6%. The median degree of mitral regurgitation at follow-up was 0. Ninety-three percent of the patients were highly satisfied with either no or mild postoperative pain, and 98.4% believed they had an aesthetically pleasing scar. CONCLUSIONS: Totally endoscopic mitral valve repair can be done safely with excellent results and a high degree of patient satisfaction. It is now our exclusive approach for isolated atrioventricular valve disease.     

Guided Endodontics: Use of a Sleeveless Guide System on an Upper Premolar with Pulp Canal Obliteration and Apical Periodontitis

Guided endodontics has been used for the treatment of anterior teeth with a successful outcome. This approach is not only limited to anterior teeth because it can also be used for the treatment of premolars and molars. However, in such cases, space may be a limitation because a long bur has to be used in addition to the guide being placed on top of the teeth. The aim of this case report was to present a novel guided endodontics technique using a sleeveless 3-dimensional–printed guide. This design can reduce vertical space, allowing an open view of the tooth and irrigation during drilling. A 46-year-old female patient consulted the endodontic department with intermittent pain around tooth #5. Tooth #5 presented pain upon percussion and responded negative to a cold test. The initial periapical radiograph revealed an apical radiolucency with pulp canal obliteration. Clinically, there was no sinus tract. The tooth was diagnosed with pulp necrosis and symptomatic apical periodontitis. Guided endodontic treatment was performed with a sleeveless 3-dimensional–printed guide and long neck carbide bur with a head diameter of 1 mm to drill a minimally invasive access cavity up to the root canal. A completely healed apical area of tooth #5 was visible after 1 year on periapical radiographs. This technique seems to be a promising alternative in comparison with the conventional guided endodontic guide design for the negotiation of pulp canal obliteration in cases in which vertical space is limited.     

Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges

Bonding to tooth tissue can be achieved through an "etch&rinse," "self-etch" or "glass-ionomer" approach. In this paper, the basic bonding mechanism to enamel and dentin of these three approaches is demonstrated by means of ultramorphological and chemical characterization of tooth-biomaterial interfacial interactions. Furthermore, bond-strength testing and measurement of marginal-sealing effectiveness (the two most commonly employed methodologies to determine "bonding effectiveness" in the laboratory) are evaluated upon their value and relevance in predicting clinical performance. A new dynamic methodology to test biomaterial-tooth bonds in a fatigue mode is introduced with a recently developed micro-rotary fatigue-testing device. Eventually, today's adhesives will be critically weighted upon their performance in diverse laboratory studies and clinical trials. Special attention has been given to the benefits/drawbacks of an etch&rinse versus a self-etch approach and the long-term performance of these adhesives. Correlating data gathered in the laboratory with clinical results clearly showed that laboratory research CAN predict clinical effectiveness. Although there is a tendency to simplify bonding procedures, the data presented confirm that conventional three-step etch&rinse adhesives still perform most favorably and are most reliable in the long-term. Nevertheless, a self-etch approach may have the best future perspective. Clinically, when adhesives no longer require an "etch&rinse" step, the application time, and probably more importantly, the technique-sensitivity are substantially reduced. Especially "mild," two-step self-etch adhesives that bond through a combined micromechanical and chemical interaction with tooth tissue closely approach conventional three-step systems in bonding performance.     

Frequent causes of diarrhea: celiac disease and lactose intolerance

Celiac disease and lactose intolerance are both relatively frequent diseases with symptoms occurring after ingestion of certain food components.In celiac disease wheat gluten and related proteins of other cereals induce an inflammatory disease of the small intestine in predisposed individuals, leading to gastrointestinal and extraintestinal symptoms. Moreover, there is an association with many other diseases and besides classic symptoms (diarrhea, weight loss, malabsorption) atypical courses with less or lacking gastrointestinal symptoms exist. The prevalence is about 1 : 100 (Europe, USA) and higher than supposed earlier. Diagnostic criteria include serologic tests (tissue transglutaminase antibody, endomysial antibody) and characteristic small bowel histology (lymphocytic infiltration, villous atrophy). Therapy is a strict and lifelong gluten-free diet. Rarely, refractory disease or lack of compliance are associated with increased risk of malignancy and worse prognosis.Lactose intolerance is attributed to low intestinal lactase levels, due to reduced genetic expression or mucosal injury and consequent intolerance to dairy products. The frequency is varying in different ethnic groups, occurring in 10-15% of Northern European people. Intensity of clinical symptoms (diarrhea, abdominal pain, bloating) depends on the amount of ingested lactose and individual activity of intestinal lactase. The capacity of lactose malabsorption can be measured using the noninvasive lactose breath hydrogen test. The treatment is based on a reduced dietary lactose intake or in case of secondary form treatment of the underlying disease.     

Principles and problems in assessing prenatal toxicity

(1) The terminology to be used in reproductive (or in prenatal) toxicology has to be in accord with other fields and principles of toxicology; the reasons are briefly discussed. In addition it is essential to assess prenatal toxicity in comparison to adult (maternal) toxicity. (2) Since pharmacokinetics in laboratory animals (e. g. rodents) usually differ considerably from that in man, this fact has to be considered when planning and evaluating studies on prenatal toxicity. Up till now this aspect has seldom been taken into account. (3) A special problem in prenatal toxicity is the inter- and intralitter variability of the toxic manifestation (especially in polytocal animals). This problem has to be recognized by the investigators and means of dealing with it have to be developed. (4) Like all other toxic effects, embryo-/fetotoxic manifestations occur dose dependently. Little information is available in the literature on clean dose-response-curves for teratogenic effects. Some data from our laboratory are presented. (5) Risk assessment of teratogenic effects up till now represents a major problem. While qualitative risk assessment for man on the basis of animal data is possible, quantitative extrapolation from such data to the situation possibly existing in man is still difficult, because basic principles and strategies are largely lacking (e. g. may a “threshold” be assumed or not?). The results of some activities towards this goal are presented from our laboratory.     

The relationship between test methodology and elastic behavior of composites

Comparisons were made of the Young's moduli obtained with tests that impose static, low-frequency, or high-frequency elastic deformations on dental composite systems. The frequency of the imposed stress was reflected in the absolute value of Young's modulus. However, the values obtained at different test frequencies could be compared and understood by taking into account this frequency dependence. It was thus found that the composite structure largely determined the type of reaction to the imposed stress. The fundamental period test permitted the greatest differentiation in the elastic behavior of the investigated composites.