Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.     

VIROLOGICAL AND SEROLOGICAL DIAGNOSIS OF RABIES IN BATS FROM AN URBAN AREA IN THE BRAZILIAN AMAZON

The outbreaks of rabies in humans transmitted by Desmodus rotundus in 2004 and 2005, in the northeast of the Brazilian State of Para, eastern Amazon basin, made this a priority area for studies on this zoonosis. Given this, the present study provides data on this phenomenon in an urban context, in order to assess the possible circulation of the classic rabies virus (RABV) among bat species in Capanema, a town in the Amazon basin. Bats were collected, in 2011, with mist nets during the wet and dry seasons. Samples of brain tissue and blood were collected for virological and serological survey, respectively. None of the 153 brain tissue samples analyzed tested positive for RABV infection, but 50.34% (95% CI: 45.67-55.01%) of the serum samples analyzed were seropositive. Artibeus planirostris was the most common species, with a high percentage of seropositive individuals (52.46%, 95% CI: 52.31 52.60%). Statistically, equal proportions of seropositive results were obtained in the rainy and dry seasons (c² = 0.057, d.f. = 1, p = 0.88). Significantly higher proportions of males (55.96%, 95% CI: 48.96-62.96%) and adults (52.37%, 95% CI: 47.35-57.39%) were seropositive. While none of the brain tissue samples tested positive for infection, the high proportion of seropositive specimens indicates that RABV may be widespread in this urban area.     

Adiposity and physical activity as predictors of cardiovascular mortality.

OBJECTIVE: To investigate whether cardiovascular mortality related to obesity could be modified by physical activity. DESIGN: Mortality follow-up. SETTING: Population study. PARTICIPANTS: Participants in a health survey: 34 868 women and 32 872 men free from known cardiovascular disease or diabetes at baseline. MAIN OUTCOME MEASURES: Total cardiovascular mortality. MAIN RESULTS: During 16 years of follow-up, 3026 women and 3526 men had died from cardiovascular causes. In middle age, obesity [body mass index (BMI) of 30 or higher] was associated with increased risk of cardiovascular death, but the association weakened with age. After 70, there was no association between BMI and cardiovascular death. At all ages, a lower level of physical activity was associated with a higher cardiovascular mortality. In women with high physical activity, indicated by at least 30 min of moderate to vigorous activity more than once a week, cardiovascular mortality was only slightly higher in the obese compared to lean women (adjusted relative risk, 1.27; 95% confidence interval, 0.80-2.00). In men with high physical activity, cardiovascular mortality was, however, significantly higher among the obese (relative risk, 1.62; 95% confidence interval, 1.09-2.40). In both genders cardiovascular mortality was substantially higher in obese people who reported no regular physical activity compared to obese people with a high level of physical activity. CONCLUSION: In obese women, being highly active may, to a large extent, compensate for the risk-increasing effect of being obese, whereas in obese men who engage in a high level of physical activity, the risk of cardiovascular death may be higher than in lean and equally active men.     

Results of the operative treatment in Madelung's deformity]

Nine wrists in eight patients were treated surgically between 1988 and 2003 for symptomatic Madelung's deformity. The pain of involved wrist followed by forearm deformation fulfilled criteria for surgery. Closing wedge osteotomy of the distal radius were carried out eight times accompanied by shortening of the ulna (four patients), excision of the distal ulna (one patient), and no ulnar surgery (three patients). Pain relieved after surgery. The follow up period ranged from 1 to 9.5 years. No pour results were stated in subjective patient's estimation during final check up. Wrist appearance were stated to be satisfactory. Limitation of the range of motion concerning supination and pronation of the forearm were stated invariably. X-ray retrospective assessment of the inclination angle, lunate coverage and presence of arthritic changes were conducted. Time and method of surgical treatment for Madelung's deformity should be considered individually.     

复合杂合parkin基因突变家族的不同表型

背景：Parkin基因（PRKN）突变可导致常染色体隐性遗传性早发帕金森病（EOPD）。目的：探讨EOPD白人家族PRKN突变的表现和基因型-表型关系。设计：对EOPD家族的3代20例成员进行基因分析，该家族有4例患者。应用直接基因组DNA测序、半定量聚合酶链反应、实时定量聚合酶链反应以及逆转录酶聚合酶链反应分析以确定PRKN突变。结果：4例早发患者（年龄30—38岁）被确定有PRKN复合杂合突变（T240M和EX5_6缺失），虽然PRKN的杂合T240M和纯合EX5_6缺失突变已有描述，但是据悉，本文为上述复合杂合突变的首次报道。患者的表型为典型常染色体隐性遗传性EOPD的表现，其特征是对左旋多巴治疗有效、相对缓慢的进展和运动障碍。所有杂合突变的基因携带者（T240M或EX5_6缺失）和1例56岁的复合杂合突变女性携带者（T240M和EX5_6缺失）无任何神经系统症状。结论：研究发现，PRKN基因复合杂合突变（T240M和EX5_6缺失）导致一个大的白人家族中4例成员发生常染色体隐性遗传性EOPD。另外1例成员具有相同的突变，比4例患者的平均发病年龄大10岁，并且无本病的临床表现。不完全的外显率对遗传咨询具有暗示作用，并且提示复杂的基因一环境交互作用在PRKN相关EOPD的发病机制中发挥作用。