Inactivation Methods for Experimental Nipah Virus Infection

Nipah virus (NiV) is an emerging zoonotic paramyxovirus that causes severe disease in humans and livestock. Due to its high pathogenicity in humans and the lack of available vaccines and therapeutics, NiV needs to be handled in biosafety level 4 (BSL-4) laboratories. Safe inactivation of samples containing NiV is thus necessary to allow further processing in lower containment areas. To date, there is only limited information available on NiV inactivation methods validated by BSL-4 facilities that can be used as a reference. Here, we compare some of the most common inactivation methods in order to evaluate their efficacy at inactivating NiV in infected cells, supernatants and organs. Thus, several physical and chemical inactivation methods, and combinations thereof, were assessed. Viral replication was monitored for 3 weeks and NiV presence was assessed by RT-qPCR, plaque assay and indirect immunofluorescence. A total of nineteen methods were shown to reduce NiV infectious particles in cells, supernatants and organs to undetectable levels. Therefore, we provide a list of methods for the safe and efficient inactivation of NiV.     

A scoring system for AML patients aged 70 years or older,eligible for intensive chemotherapy: a study based on a large European data set using the DATAML,SAL, and PETHEMA registries

In a context of therapeutic revolution in older adults with AML, it is becoming increasingly important to select patients for the various treatment options by taking account of short-term efficacy and toxicity as well as long-term survival. Here, the data from three European registries for 1,199 AML patients aged 70 years or older treated with intensive chemotherapy were used to develop a prognostic scoring system. The median follow-up was 50.8 months. In the training set of 636 patients, age, performance status, secondary AML, leukocytosis, and cytogenetics, as well as NPM1 mutations (without FLT3-ITD), were all significantly associated with overall survival, albeit not to the same degree. These factors were used to develop a score that predicts long-term overall survival. Three risk-groups were identified: a lower, intermediate and higher-risk score with predicted 5-year overall survival (OS) probabilities of ≥12% (n = 283, 51%; median OS = 18 months), 3–12% (n = 226, 41%; median OS = 9 months) and <3% (n = 47, 8%; median OS = 3 months), respectively. This scoring system was also significantly associated with complete remission, early death and relapse-free survival; performed similarly in the external validation cohort (n = 563) and showed a lower false-positive rate than previously published scores. The European Scoring System ≥70, easy for routine calculation, predicts long-term survival in older AML patients considered for intensive chemotherapy.Subject terms: Acute myeloid leukaemia, Risk factors     

Influence of Xenogeneic and Alloplastic Carriers for Bone Augmentation on Human Unrestricted Somatic Stem Cells

Alloplastic and xenogeneic bone grafting materials are frequently used for bone augmentation. The effect of these materials on precursor cells for bone augmentation is yet to be determined. The aim of this study was to ascertain, in vitro, how augmentation materials influence the growth rates and viability of human unrestricted somatic stem cells. The biocompatibility of two xenogeneic and one alloplastic bone graft was tested using human unrestricted somatic stem cells (USSCs). Proliferation, growth, survival and attachment of unrestricted somatic stem cells were monitored after 24 h, 48 h and 7 days. Furthermore, cell shape and morphology were evaluated by SEM. Scaffolds were assessed for their physical properties by Micro-CT imaging. USSCs showed distinct proliferation on the different carriers. Greatest proliferation was observed on the xenogeneic carriers along with improved viability of the cells. Pore sizes of the scaffolds varied significantly, with the xenogeneic materials providing greater pore sizes than the synthetic inorganic material. Unrestricted somatic stem cells in combination with a bovine collagenous bone block seem to be very compatible. A scaffold’s surface morphology, pore size and bioactive characteristics influence the proliferation, attachment and viability of USSCs.     

Resin infiltration of deproteinised natural occlusal subsurface lesions improves initial quality of fissure sealing

The aim of this ex vivo study was to evaluate the infiltration capability and rate of microleakage of a low-viscous resin infiltrant combined with a flowable composite resin (RI/CR) when used with deproteinised and etched occlusal subsurface lesions (International Caries Detection and Assessment System code 2). This combined treatment procedure was compared with the exclusive use of flowable composite resin (CR) for fissure sealing. Twenty premolars and 20 molars revealing non-cavitated occlusal carious lesions were randomly divided into two groups and were meticulously cleaned and deproteinised using NaOCl (2%). After etching with HCl (15%), 10 premolar and 10 molar lesions were infiltrated (Icon/DMG; rhodamine B isothiocyanate (RITC)-labelled) followed by fissure sealing (G-?nial Flo/GC; experimental group, RI/CR). In the control group (CR), the carious fissures were only sealed. Specimens were cut perpendicular to the occlusal surface and through the area of the highest demineralisation (DIAGNOdent pen, KaVo). Using confocal laser-scanning microscopy, the specimens were assessed with regard to the percentage of caries infiltration, marginal adaption and internal integrity. Within the CR group, the carious lesions were not infiltrated. Both premolar (57.9%± 23.1%) and molar lesions (35.3%± 22.1%) of the RI/CR group were uniformly infiltrated to a substantial extent, albeit with significant differences (P=0.034). Moreover, microleakage (n=1) and the occurrence of voids (n=2) were reduced in the RI/CR group compared with the CR group (5 and 17 specimens, respectively). The RI/CR approach increases the initial quality of fissure sealing and is recommended for the clinical control of occlusal caries.     

Palliative Care Consultation Service and Palliative Care Unit: Why Do We Need Both?

Background.

Palliative care (PC) infrastructure has developed differently around the globe. Whereas some institutions consider the palliative care unit (PCU) a valuable component, others report that the sole provision of a state-of-the art palliative care consultation service (PCCS) suffices to adequately care for the severely ill and dying.

Objective.

To aid institutional planning, this study aimed at gathering patient data to distinguish assignments of a concomitantly run PCU and PCCS at a large hospital and academic medical center.

Methods.

Demographics, Eastern Cooperative Oncology Group performance status, symptom/problem burden, discharge modality, and team satisfaction with care for all 601 PCU and 851 PCCS patients treated in 2009 and 2010 were retrospectively analyzed.

Results.

Patients admitted to the PCU versus those consulted by the PCCS: (a) had a significantly worse performance status (odds ratio [OR], 1.48); (b) were significantly more likely to suffer from severe symptoms and psychosocial problems (OR, 2.05), in particular concerning physical suffering and complexity of care; and (c) were significantly much more likely to die during hospital stay (OR, 11.03). For patients who were dying or in other challenging clinical situations (suffering from various severe symptoms), self-rated team satisfaction was significantly higher for the PCU than the PCCS.

Conclusion.

This study presents a direct comparison between patients in a PCU and a PCCS. Results strongly support the hypothesis that the coexistence of both institutions in one hospital contributes to the goal of ensuring optimal high-quality PC for patients in complex and challenging clinical situations.     

Isolated left-sided congenital diaphragmatic hernia: cardiac axis and displacement before fetal viability has no role in predicting postnatal outcome

OBJECTIVES: The purpose of this retrospective study was to determine whether objective assessment of cardiac shifting on two-dimensional ultrasonography can predict postnatal outcome in fetuses with isolated left-sided congenital diaphragmatic hernia (CDH). MATERIALS AND METHODS: Still images at the level of the four-chamber view were obtained in 23 fetuses with left-sided CDH. A group of 12 fetuses (3 non-survivors and 9 survivors) were examined at two periods, between 20 and 30 weeks and between 31 and 40 weeks. A further 11 fetuses (2 non-survivors and 9 survivors) were examined between 31 and 40 weeks. Fetal heart axis and position were determined manually and associated with postnatal outcome. RESULTS: The cardiac axis remained constant in the 9 survivors (15.5 +/- 3.2 versus 17.2 +/- 3.3, p = 0.71) and 3 non-survivors (19.0 +/- 11.5 versus 18.5 +/- 11.8, p = 0.97). There was no statistical difference between the 9 survivors and 3 non-survivors at the two periods. Cardiac displacement remained constant in the 9 survivors (0.2 +/- 0.02 versus 0.2 +/- 0.02, p = 0.32) but increased significantly in the 3 non-survivors (0.2 +/- 0.04 versus 0.4 +/- 0.02, p = 0.015). The difference between survivors and non-survivors was statistically significant between the18 survivors and 5 non-survivors examined between 31 and 40 weeks of gestation (0.2 +/- 0.02 versus 0.4 +/- 0.02, p = 0.037). CONCLUSION: This study does not support the hypothesis that objective assessment of mediastinal shift in fetuses with left-sided CDH has a role in predicting postnatal outcome before fetal viability, which is when it would be more useful for counseling patients regarding whether to continue with the pregnancy or to opt for termination.     

Removal of Stair-Step Effects in Binder Jetting Additive Manufacturing Using Grayscale and Dithering-Based Droplet Distribution

Binder jetting is a layer-based additive manufacturing process for three-dimensional parts in which a print head selectively deposits binder onto a thin layer of powder. After the deposition of the binder, a new layer of powder is applied. This process repeats to create three-dimensional parts. The binder jetting principle can be adapted to many different materials. Its advantages are the high productivity and the high degree of freedom of design without the need for support structures. In this work, the combination of binder jetting and casting is utilized to fabricate metal parts. However, the achieved properties of binder jetting parts limit the potential of this technology, specifically regarding surface quality. The most apparent surface phenomenon is the so-called stair-step effect. It is considered an inherent feature of the process and only treatable by post-processing. This paper presents a method to remove the stair-step effect entirely in a binder jetting process. The result is achieved by controlling the binder saturation of the individual voxel volumes by either over or underfilling them. The saturation is controlled by droplet size variation as well as dithering, creating a controlled migration of the binder between powder particles. This work applies the approach to silica sand particle material with an organic binder for casting molds and cores. The results prove the effectiveness of this approach and outline a field of research not identified previously.