Heavy metals transported through a multi-trophic food chain influence the energy metabolism and immune responses of Cryptolaemus montrouzieri

Ecotoxicology - Contamination of environment with heavy metals is increasingly becoming an issue of major concern across the globe. Heavy metals are highly toxic to humans as well as other...     

Quantifying the atomic-level mechanics of single long physisorbed molecular chains

Individual in situ polymerized fluorene chains 10–100 nm long linked by C–C bonds are pulled vertically from an Au(111) substrate by the tip of a low-temperature atomic force microscope. The conformation of the selected chains is imaged before and after manipulation using scanning tunneling microscopy. The measured force gradient shows strong and periodic variations that correspond to the step-by-step detachment of individual fluorene repeat units. These variations persist at constant intensity until the entire polymer is completely removed from the surface. Calculations based on an extended Frenkel–Kontorova model reproduce the periodicity and magnitude of these features and allow us to relate them to the detachment force and desorption energy of the repeat units. The adsorbed part of the polymer slides easily along the surface during the pulling process, leading to only small oscillations as a result of the high stiffness of the fluorenes and of their length mismatch with respect to the substrate surface structure. A significant lateral force also is caused by the sequential detachment of individual units. The gained insight into the molecule–surface interactions during sliding and pulling should aid the design of mechanoresponsive nanosystems and devices.Ever since the invention of the atomic force microscope (AFM) (1) and the first imaging applications, force spectroscopy has been applied to study the mechanical behavior of polymers (2); more complex chain-like biomolecules, e.g., DNA complementary strands (3); and proteins, subject to controlled extension (2) or applied force (4), mostly in solution and at room temperature. Reactive groups are chemically inserted at the ends and/or along each molecule to firmly bind some of them to suitably functionalized tips and sample surfaces. Irreversible jumps in curves of force vs. vertical separation may be associated in this way with the rupture of bonds or the unfolding of coiled subunits. If reproducible, the lowest peak in the histogram of the forces attained just before each jump is attributed to such an event in a single molecular chain or complementary pair. In the case of homogeneous polymers or protein segments, simulations based on two-state rate theory combined with a standard model of polymer nonlinear elasticity can reproduce such events, whereas reversible plateaus or continuous rises in the force may be associated with fast binding–rebinding processes or with large thermal fluctuations (2). Attention thus has focused on conformational changes strongly influenced by pulling speed or imposed force jumps (4) and also by external stimuli, e.g., optical excitation of inserted chromophores (5) or specific reactants or enzymes (6). Furthermore, mechanical forces recently were discovered by chemists as a unique stimulus to induce specific chemical reactions. In this so-called mechanochemistry, sonication typically is applied to polymer systems and is believed to result in a strong force acting on the weakest link in the chain, where the reaction takes place (7, 8). Regardless of the direct or indirect exposure to force, it is clear that the mechanics of polymer chains constrained in their surrounding environment is of utmost importance for a variety of biophysical and chemical processes as well as self-healing materials applications (9, 10).A few pulling studies have been conducted on polyelectrolytes unspecifically adsorbed on self-assembled monolayers via tunable electrostatic interactions (11), including DNA (12). They merely revealed noisy force plateaus, interpreted as continuous partial desorption of single chains, terminated by a drop to zero upon complete detachment from the surface. Despite the undisputed merit of these studies, little is known about the mechanical behavior of single molecular chains pulled off a surface, both defined and characterized on the atomic scale, in the absence of significant thermal fluctuations and drifts. Measurements at low temperature reduce the diffusion of adsorbates and provide an opportunity to determine the energetic landscape of specific molecules interacting with a surface under controlled conditions. As demonstrated here, the sliding and detachment mechanisms of individual polymer repeat units can then be inferred from the analysis of pulling experiments. A detailed interpretation of our results, based on a modified Frenkel–Kontorova (FK) model (13), also is presented.     

Enhanced dissolution of valsartan-vanillin binary co-amorphous system loaded in mesoporous silica particles

The study was aimed to prepare a co-amorphous system of valsartan (VAL) with vanillin (VAN) for improving its solubility and dissolution followed by its confinement in mesoporous silica particles (MSPs) to stabilise the co-amorphous system and prevent its recrystallization. Amorphous VAL and VAN were obtained through quench-cooling and VAL/VAN binary co-amorphous system (VAL/VAN-CAS) was prepared through solvent evaporation technique. The particle size and morphology of VAL/VAN-CAS-MSPs were studied using scanning electron microscopy (SEM) and solid-state characterisation was performed by differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD). The in vitro dissolution was investigated by dialysis bag diffusion method. SEM analysis revealed irregular shaped VAL/VAN-CAS-MSPs with a size range of 5–25?μm, while outcomes of DSC and XRPD confirmed the formation of VAL/VAN-CAS. The in vitro dissolution profiles demonstrated a significantly increased dissolution in first 60?minutes from VAL/VAN-CAS (～68%) and VAL/VAN-CAS-MSPs (～76%) compared to powder VAL (～25%).     

Mitigation of acetamiprid – induced renotoxicity by natural antioxidants via the regulation of ICAM,NF-kB and TLR 4 pathways

BackgroundAcetamiprid (ACMP) is a member of the neonicotinoid group of insecticides. It is extensively used worldwide. The misuse of ACMP creates danger hazards to human and animal.MethodsACMP induced renal damage evidenced by an increase in kidney injury biomarkers. So the goal of this work is to clarify the reno protective effect of Quercetin (Qrctn) and/or Nano-glutathione (N-Gluta) solely or in combination to counterbalance the danger effect of ACMP. All treatments with the previous agents were coadministered orally with ACMP for one month.ResultsACMP ingestion caused a significant rise in serum creatinin, urea, and uric acid, TNF α along with renal cystatin C, lipid peroxidation and nitric oxide with the concomitant decline in the levels of reduced glutathione and IL-10 levels. Protein expression of ICAM was upregulated as well as mRNA expression of NF-κB while mRNA expression of Nrf2 was down-regulated. Immune histochemistry of TLR 4 revealed strong immune reaction. The administration of Qrctn or N-Gluta either individually or together modulated all the preceding aforementioned parameters.ConclusionFascinatingly Qrctn and N-Gluta combination was the most powerful regimen to frustrate ACMP reno-toxicity and may be deliberate as a hopeful applicant for renal therapy.     

Hypocretin/orexin modulates body weight and the metabolism of glucose and insulin

The hypocretin/orexin (Hcrt/orexin) unit affects the functions of the nervous, cardiovascular, gastrointestinal, and reproductive systems. Hcrt/orexin ligands and receptors have been localized to different parts of the central and peripheral nervous systems, cerebrospinal fluid and blood, exocrine (pancreas, salivary, lacrimal) as well as endocrine (pancreatic islets, pituitary, adrenal) glands. Several factors including stress, glucagon‐like peptide‐1 agonists, glutamate, nicotine, glucose, and hypoglycaemia stimulate the expression of Hcrt/orexin system, but it is inhibited by ageing, bone morphogenetic protein, hypoxia/hypercapnia, melanocortin receptor accessory protein 2, and glucagon. Literature reports show that Hcrt/orexin can significantly increase insulin secretion from normal and diabetic rat pancreata. Hcrt/orexin decreases blood glucose concentration and reduces insulin resistance partly via increased tissue expression of glucose transporter type 4. It reduces obesity by increasing browning of fat cells and energy expenditure. Taken together, Hcrt/orexin modulates obesity and the metabolism of glucose and insulin. The Hcrt/orexin system may thus be a target in the development of new therapies for the treatment of diabetes mellitus.     

New inflammatory markers in pre-eclampsia: echocardiographic epicardial fat thickness and neutrophil to lymphocyte ratio

Background: Increased epicardial fat thickness (EFT) has been proposed as a new cardiometabolic risk factor. The neutrophil/lymphocyte ratio (NLR) has predictive and prognostic value in several cardiovascular diseases. The aim of this study was to explore the association between EFT and NLR in patients with pre-eclampsia.

Methods: Hundred and eight pregnant patients with a mean age of 30.6?±?6.3 years were included in the study. Patients were divided into two groups based on the presence of pre-eclampsia. All participants underwent transthoracic echocardiography imaging, and complete blood counts were measured by an automated hematology analyzer. Statistical analysis was performed using the Chi-square, Mann–Whitney U, correlation and logistic regression tests, and receiver operating characteristic (ROC) analysis.

Result: The mean EFT value of the pre-eclampsia group was significantly higher than the control group (6.9?±?0.6 versus 5.6?±?0.6; p?p?Conclusion: Unlike many other inflammatory markers and bioassays, NLR and echocardiographic EFT are inexpensive and readily available biomarkers that may be useful for risk stratification in patients with pre-eclampsia.