Extubación ultra fast-track vs. convencional tras cirugía cardiaca en un centro de referencia cardiovascular en Colombia. Estudio longitudinal

Introduction

The fast track / ultra-fast-track protocols are techniques used to optimise the patient care process and a quick recovery after cardiac surgery. They are one of the mainstays of efficient practice. With their use, the length of hospital and intensive care unit (ICU) stays are reduced, with a direct impact on costs and the quality of the health service.

Efectividad de un nuevo modelo de derivación telefónica compartida entre atención primaria y atención hospitalaria

Aim

The purpose of this study is to find out whether telephone referral from Primary Health Care to Internal Medicine Consult manages to reduce waiting days as compared to traditional referral. This study also aims to know how acceptable is the telephone referral to general practitioners and their patients.

Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.