Adhesion systems in normal breast and in invasive breast carcinoma.

To analyze the role of various elements of the adhesion system in the organization of the normal mammary gland and in breast carcinoma, we have studied simultaneously the expression of integrins, E- and P-cadherins, and cytoplasmic constituents of adherens junctions. In the normal gland, E-cadherin and alpha-catenin are present in luminal epithelial and myoepithelial cells, whereas integrins are more abundant in acinar epithelial and in myoepithelial cells. We demonstrate here that, in addition, myoepithelial cells express much more vinculin and alpha-actinin than luminal epithelial cells, whereas talin and focal adhesion kinase (pp125FAK) are restricted to the basal cell layer. In invasive carcinoma, E-cadherin is usually present although often in reduced amount; different integrin subunits are expressed either by a fraction or by all of the cells or are absent. However, the cytoplasmic components of adherens junctions, such as alpha-catenin, vinculin, alpha-actinin, talin, and pp125FAK, are expressed at low levels or cannot be detected in the carcinoma cells. Our data suggest that 1), in the normal mammary gland, the myoepithelial cells, being particularly rich in integrins and cytoplasmic components of the adherens junctions, play an important role in the maintenance of tissue integrity; 2), in invasive carcinoma, cell aggregates may be maintained due to varying levels of expression of E-cadherin and/or integrins; and 3), interaction of the transmembrane adhesion molecules with the cytoskeleton in carcinoma may be impaired as revealed by reduced levels of expression of alpha-catenin, vinculin, alpha-actinin, talin, and pp125FAK. Importantly, carcinoma cells, when exposed to stroma during invasion, do not acquire the adhesion apparatus characteristic of normal cells in contact with the extracellular matrix.     

血管紧张素Ⅱ经AT1受体和ERK1/2上调心肌细胞Cx43间隙连接

目的：探讨血管紧张素Ⅱ对培养新生鼠心室肌细胞Cx43间隙连接的影响及其机制。 方法： AngⅡ处理培养心肌细胞24 h。缬沙坦、PD98059在AngⅡ刺激细胞前1 h加到培养基中，对照组加等体积药物溶剂DMSO。用Western blotting分析、代谢标记和免疫沉淀测定、电镜观察心肌细胞Cx43表达、合成和间隙连接。 结果： Western blotting分析显示用10-9-10-6 mol/L AngⅡ刺激细胞24 h，Cx43的表达与对照组相比呈浓度依赖性增加；用AngⅡ 0.1 μmol/L刺激心肌细胞24 h，磷酸化ERK1/2(P-ERK1/2)活性高于对照组（P<0.01），AT1受体拮抗剂缬沙坦（1 μmol/L）能完全阻断AngⅡ增加P-ERK1/2活性；用AngⅡ 0.1 μmol/L刺激心肌细胞24 h，Cx43表达及P-ERK1/2活性均高于对照组(P<0.01)，ERK1/2激酶特异性抑制剂PD98059(1 μmol/L) 能阻断AngⅡ上调Cx43表达和增加P-ERK1/2活性。代谢标记和免疫沉淀测定显示AngⅡ处理组放射渗入Cx43的量明显高于对照组（P<0.01）,缬沙坦(1 μmol/L)能完全阻断AngⅡ增加放射渗入Cx43的量。电镜观察表明用AngⅡ 0.1 μmol/L刺激心肌细胞24 h，AngⅡ处理组细胞间隙连接数目和大小大于对照组（P<0.05）。 结论： AngⅡ通过AT1受体和ERK1/2促进培养心肌细胞合成Cx43，上调Cx43表达和增加间隙连接数目及大小。     

维甲酸调变的巨噬细胞在体外对A549癌细胞的作用

The tumoricidal activity of mouse macrophage (M phi) activated with retinoic acid (RA) and the effect of RA in combination with CP on mouse M phi were studied with phase contrast microscopy, light microscopy, and 3HTdR labelling technique. The results of our studies suggest that: (1) RA can activate mouse peritoneal M phi both in vivo and in vitro, and the RA-activated M phi are cytostatic and cytolytic to A549 cells. The degree of activation is related to the concentration or dosage of RA given, and (2) RA can enhance the function of CP-activated M phi. A summation effect was obtained by giving RA in combination with CP. This effect was related to the dosage of RA. When optimal dosage was given in combination with CP, a synergistic action in activating M phi could be obtained. Morphological changes could be seen under phase contrast microscope and light microscope in killed tumor cells.     

Definition of linear antigenic regions of the HPV16 L1 capsid protein using synthetic virion-like particles.

Mice of three haplotypes (H-2d, H-2b, and H-2d/b) were immunized with synthetic HPV16 virus-like particles (VLPs), produced using a vaccinia virus doubly recombinant for the L1 and L2 proteins of HPV16. The resultant anti-VLP antisera recognized HPV16 capsids by ELISA assay and baculovirus recombinant HPV16 L1 and L2 protein on immunoblot. Overlapping peptides corresponding to the HPV16 L1 amino acid sequence were used to define the immunoreactive regions of the L1 protein. The majority of the L1 peptides were reactive with IgG from the mice immunized with the synthetic HPV16 capsids. A computer algorithm predicted seven B epitopes in HPV16 L1, five of which lay within peptides strongly reactive with the murine antisera. The murine anti-VLP antisera failed to react with the two peptides recognized by anti-HPV16L1 monoclonal antibodies raised by others against recombinant L1 fusion protein. We conclude that the immunoreactive epitopes of HPV16 defined using virus-like particles differ significantly from those defined using recombinant HPV16 L1 fusion proteins, which implies that such fusion proteins may not be the antigens to look for HPV16L1 specific immune responses in HPV-infected patients.     

Monte Carlo dose verification for intensity-modulated arc therapy

Intensity-modulated arc therapy (IMAT), a technique which combines beam rotation and dynamic multileaf collimation, has been implemented in our clinic. Dosimetric errors can be created by the inability of the planning system to accurately account for the effects of tissue inhomogeneities and physical characteristics of the multileaf collimator (MLC). The objective of this study is to explore the use of Monte Carlo (MC) simulation for IMAT dose verification. The BEAM/DOSXYZ Monte Carlo system was implemented to perform dose verification for the IMAT treatment. The implementation includes the simulation of the linac head/MLC (Elekta SL20), the conversion of patient CT images and beam arrangement for 3D dose calculation, the calculation of gantry rotation and leaf motion by a series of static beams and the development of software to automate the entire MC process. The MC calculations were verified by measurements for conventional beam settings. The agreement was within 2%. The IMAT dose distributions generated by a commercial forward planning system (RenderPlan. Elekta) were compared with those calculated by the MC package. For the cases studied, discrepancies of over 10% were found between the MC and the RenderPlan dose calculations. These discrepancies were due in part to the inaccurate dose calculation of the RenderPlan system. The computation time for the IMAT MC calculation was in the range of 20-80 min on 15 Pentium-Ill computers. The MC method was also useful in verifying the beam apertures used in the IMAT treatments.     

Preparation of graded porous titanium coatings on titanium implant materials by plasma spraying

Graded porous titanium coatings have been deposited on titanium substrates for dental implants by plasma spraying in an argon atmosphere. X-ray diffraction (XRD), scanning electron microscopy (SEM), surface roughness measurement, and tensile strength tests were performed on graded porous coatings. The results showed that Ti(3)O(5) was formed in the outermost surface of the porous coatings due to oxidation. The graded porous coatings consisted of three layers. The outer layer was full of macropores with a surface roughness of approximately 100 microm. The diameter of many macropores reached and even surpassed 150 microm, which could be beneficial for tissue to grow into the coating. The middle layer consisted of a mixture of micropores and macropores. The inner layer was a very dense and tight interface layer that included mechanical, physical, and metallurgical bonding. In tensile strength tests, testing bars peeled off the coatings, because the adhesive agent fractured, but the coatings remained intact.     

Primary non-Hodgkin's lymphoma of the intestine: a morphological, immunohistochemical and clinical study of 31 Chinese cases

Thirty-one cases of primary non-Hodgkin's lymphoma of the intestine were investigated. Twenty-one were of B-cell and 10 of T-cell origin. The B-cell lymphomas comprised two cases of low-grade B-cell lymphoma of mucosaassociated lymphoid tissue (MALT), one of centroblastic/centrocytic type, three of high-grade B-cell lymphoma coexisting with a low-grade B-cell lymphoma of MALT, nine of centroblastic, three of immunoblastic and three of Burkitt type. Of the T-cell lymphomas, eight were of pleomorphic medium-to large-sized cell type and two of large cell anaplastic type. All the B-cell lymphomas expressed CD20 (L26) and/or Ki-B5; in six there was monotypic immunoglobulin light chain restriction. Membrane positivity for CD45RO (UCHL1) was observed in the 10 cases of T-cell lymphoma, but the tumour cells did not express monocyte-macrophage markers. Clinically, the patients with T-cell lymphomas were usually young males with constitutional symptoms and their prognosis was significantly worse than those of patients with intestinal B-cell lymphoma.     

Rapid, accurate genotyping of the common -alpha(4.2) thalassaemia deletion based on the use of denaturing HPLC

AIMS: To develop an alternative assay for specific genotyping of the -alpha(4.2) thalassaemia deletion based on the DNA sequence features surrounding the breakpoint. METHODS: The 5' and 3' ends of the breakpoint regions of the -alpha(4.2) allele and the normal homologous segments were sequenced in Chinese individuals. A sequence haplotype composed of four single nucleotide variations within the X2/X1 box of the -alpha(4.2) breakpoint region was found in all of the 10 Chinese -alpha(4.2) thalassaemia alleles studied. Based on these findings, a novel polymerase chain reaction (PCR)/denaturing high performance liquid chromatography (DHPLC) assay was developed for rapid genotyping of the -alpha(4.2) allele instead of traditional Southern blotting or Gap-PCR. This method involves amplification of the alpha globin target sequence encompassing these four polymorphic sites, followed by a partially denaturing HPLC analysis using the transgenomic WAVE DNA fragment analysis system. RESULTS: The three major genotypes (-alpha4.2/alphaalpha, -alpha(4.2)/--SEA, and alphaalpha/alphaalpha) could be distinguished through the characteristic chromatograms generated by the WAVE system. The accuracy of this technique was evaluated blindly, and the results were 100% (40 of 40) concordant with the genotypes previously characterised by Southern blotting or Gap-PCR. CONCLUSIONS: This study validates the PCR/DHPLC approach as a simple, rapid, highly accurate, and cost effective method, potentially adaptable for use in epidemiological surveys, genetic screening, and diagnosis of silent alpha+ thalassaemia and Hb H disease.     

Electrostatic spray deposition (ESD) of calcium phosphate coatings, an in vitro study with osteoblast-like cells

Electrostatic spray deposition (ESD) is a recently developed technique to deposit a calcium phosphate (CaP) coating upon substrates. With this technique, an organic solvent containing calcium and phosphate is pumped through a nozzle. Between the nozzle and substrate a high voltage is applied. As a consequence, droplets coming out the nozzle disperse into a spray, and this spray is deposited upon the substrate. When the solvent has evaporated, a coating is formed on the substrate. ESD allows for a variation in coating composition and morphology. Titanium alloy (TiAl6V4) substrates were coated with a CaP layer using two different methods; radio frequency magnetron sputtering, and ESD. These surfaces were characterized with X-ray diffraction, Fourier transform infrared spectroscopy, an universal surface tester, scanning electron microscopy, and energy dispersive spectrometry. Subsequently, bone marrow cells were isolated from rat femora and cultured 1, 4, 8, 14 and 16 days. Cell proliferation, alkaline phosphatase activity, and osteocalcin concentration were assayed. RT-PCR was done for collagen type I and osteocalcin. SEM was also performed to observe cellular behaviour during culture. Two separate runs of the experiment were performed. In the first run, osteoblast-like cells on both CaP coatings showed similar results in all assays. In the second run, proliferation and osteogenic expression had increased on ESD coatings. On basis of these results, we conclude that the novel ESD coating behaved similar to, or even better than the known RF magnetron sputter coating. Thus, ESD could be a valid addition to already existing CaP coating processes.