心脏瓣膜置换术后患者的出院准备度现状及其影响因素分析

目的:调查心脏瓣膜置换术后患者的出院准备度现状,并分析其影响因素。方法:于2018年9月至2019年3月用一般资料、出院准备度量表、出院指导质量量表对139例瓣膜置换术后患者进行调查。结果:心脏瓣膜置换术后患者的出院准备度总分为(89.51±8.53)分,与出院指导质量呈正相关;多元回归分析显示,主要照顾者、婚姻状况、工作状态、服药种类、出院指导质量为出院准备度影响因素。结论:心脏瓣膜置换术后患者的出院准备度有待提高,患者感知的个人状态得分不理想;护士应鼓励患者配合进行早期康复,强化出院指导,采取有效措施提供康复信息,满足患者及其家属需求,提高出院准备度。     

角膜电刺激对糖尿病大鼠前部缺血性视神经病变模型的影响

观察并评估角膜电刺激对糖尿病大鼠前部缺血性视神经病变（AION）模型的影响。方法：实验 研究。健康雄性Sparague-Dawley大鼠40只，随机分组后抽出8只作为正常大鼠组。余下32只先予 以链脲佐菌素腹腔注射建立糖尿病大鼠模型，将造模成功的大鼠随机抽出8只作为糖尿病组，余下 24只糖尿病大鼠采用孟加拉玫瑰红联合532 nm激光方法建立AION大鼠模型。将24只造模成功的 AION大鼠随机分成3组，每组8只，分别为AION模型组，不予任何处理；电刺激组，予以角膜电刺 激（刺激参数为：电流1 mA，频率20 Hz，波宽1 ms/phase，刺激时间1 h，隔日1次，刺激2周）；假电 刺激组，电极安放位置与电刺激组相同，仅不接通电源。2周后5组大鼠进行眼底照相、光学相干断 层扫描和视觉诱发电位，然后处死，行视网膜及视神经冰冻切片，苏木精伊红染色观察。数据采用 单因素方差分析和LSD-t检验进行分析。结果：正常大鼠组视盘上半部视网膜厚度为（211±13）μm， 糖尿病大鼠组为（206±16）μm，AION模型组为（240±54）μm，假电刺激组为（216±11）μm，电刺 激组为（198±4）μm，5组视盘上半部视网膜厚度差异有统计学意义（F=2.854，P=0.038）。其中AION 模型组视盘上半部视网膜厚度高于正常组、糖尿病组、电刺激组，差异均有统计学意义（P<0.05）； 正常组与糖尿病组差异无统计学意义，AION模型组与假电刺激组未见明显差异。视觉诱发电位示 AION模型组N1潜伏期较电刺激组延长，差异有统计学意义（t=4.1，P<0.001）；AION模型组P1潜伏 期较正常组、糖尿病组、假电刺激组、电刺激组延长，差异均有统计学意义（t=4.1、2.5、2.6、3.2， P<0.05）；电刺激组N1-P1波幅大于假电刺激组，差异有统计学意义（t=4.0，P<0.001）。结论：角膜电 刺激能促进糖尿病大鼠前部缺血性视神经病变模型肿胀的视盘变薄，加速视盘水肿的消退，同时在 一定程度上改善视功能。     

醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响

目的　探究醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响。方法　Wistar大鼠36只，随机分为对照组、模型组、转染组，后两组建立糖尿病大鼠模型。模型建立成功后，构建含有晚期糖基化终末产物受体siRNA的质粒并利用慢病毒转染入转染组大鼠体内。造模后4周、8周、12周，记录各组大鼠体质量及空腹血糖。造模后9周，禁食6 h，测定口服葡萄糖耐量。造模后12周，处死全部大鼠后，TUNEL法检测各组大鼠视网膜神经元凋亡情况，荧光分光光度计测定醛糖还原酶活性，Western blotting法测定晚期糖基化终末产物受体的表达，RT-PCR检测视网膜中Bcl-2和Bax mRNA相对表达量。结果　造模后4周、8周、12周，转染组和模型组的大鼠体质量均低于对照组（均为P<0.05）；造模后12周，转染组大鼠体质量高于模型组（P<0.05）。造模后4周、8周、12周，各组内大鼠空腹血糖水平均无明显变化（均为P>0.05），转染组和模型组大鼠的空腹血糖水平均高于对照组（均为P<0.05）。模型组和转染组大鼠在口服葡萄糖后30 min时，血糖水平均高于对照组（均为P<0.05）；在120 min时分别下降至最低，但仍高于对照组（均为P<0.05）。模型组和转染组的视网膜神经元凋亡指数、醛糖还原酶活性、晚期糖基化终末产物受体和Bax mRNA相对表达量均高于对照组（均为P<0.05），且转染组均高于模型组（均为P<0.05）。模型组和转染组的Bcl-2 mRNA相对表达量均低于对照组（均为P<0.05），转染组低于模型组（P<0.05）。结论　晚期糖基化终末产物结合受体后产生大量的氧自由基损伤，可能是导致糖尿病视网膜神经元凋亡，进而导致糖尿病视网膜病变发生的机制之一。     

应用国产封堵器在治疗先天性心脏病的临床疗效分析

目的 总结国产封堵器经皮和经胸途径治疗先天性心脏病的临床疗效。方法 回顾性分析我院2013年1月至2017年12月在X线透视下或单纯超声心动图引导下采用经皮穿刺股静脉或股动静脉法，或者食管超声心动图监测下经胸小切口行先天性心脏病封堵1186例，其中经皮X线下封堵1081例、经皮单纯超声引导下封堵42例、经胸封堵63例；其中动脉导管未闭（ patent ductus arteriole，PDA）426例、房间隔缺损（atrial septal defect，ASD）363例、室间隔缺损（ventricular septal defect，VSD）348例、卵圆孔未闭11例、房间隔缺损合并室间隔缺损9例、房间隔缺损合并动脉导管未闭6例、房间隔缺损合并肺动脉瓣狭窄（pulmonary stenosis，PS）12例、动脉导管未闭合并肺动脉瓣狭窄8例、主肺动脉侧支封堵3例[经胸封堵66例改为63例，PDA443例改为426例]。结果 全组病例成功率98.2％（1165/1186），无死亡病例。随访1~36个月，术后第1、3、6、12个月及术后每年常规行超声心动图及心电图检查。术后第1、6、12个月的随访率分别为 92.9%（1102/1186）、84.1%（998/1186）、70.5%（836/1186）。超声心动图提示少量残余分流（<3 mm）18例；三尖瓣少量反流33例，中量反流5例；主动脉瓣轻度反流5例，中度反流1例；心律失常Ⅲ°房室传导阻滞（Avionics Bulletin，AVB[房室传导阻滞（Avionics Bulletin，AVB）]）1 例，Ⅱ°AVB 3例，完全性左束支3例，交界性心动过速3例，交界性逸搏2例。结论 国产封堵器在先天性心脏病封堵治疗中具有成功率高、创伤小、并发症低、操作容易、疗效确切、恢复快等特点，是治疗先天性心脏病的理想方法。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Myeloid-derived suppressor cell (MDSC) key genes analysis in rat anti-CD28-induced immune tolerance kidney transplantation

BackgroundIn the field of transplantation, inducing immune tolerance in recipients is of great importance. Blocking co-stimulatory molecule using anti-CD28 antibody could induce tolerance in a rat kidney transplantation model. Myeloid-derived suppressor cells (MDSCs) reveals strong immune suppressive abilities in kidney transplantation. Here we analyzed key genes of MDSCs leading to transplant tolerance in this model.MethodsMicroarray data of rat gene expression profiles under accession number {"type":"entrez-geo","attrs":{"text":"GSE28545","term_id":"28545"}}GSE28545 in the Gene Expression Omnibus (GEO) database were analyzed. Running the LIMMA package in R language, the differentially expressed genes (DEGs) were found. Enrichment analysis of the DEGs was conducted in the Database for Annotation, Visualization and Integrated Discovery (DAVID) database to explore gene ontology (GO) annotation and their Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Their protein-protein interactions (PPIs) were provided by STRING database and was visualized in Cytoscape. Hub genes were carried out by CytoHubba.ResultsThree hundred and thirty-eight DEGs were exported, including 27 upregulated and 311 downregulated genes. The functions and KEGG pathways of the DEGs were assessed and the PPI network was constructed based on the string interactions of the DEGs. The network was visualized in Cytoscape; the entire PPI network consisted of 192 nodes and 469 edges. Zap70, Cdc42, Stat1, Stat4, Ccl5 and Cxcr3 were among the hub genes.ConclusionsThese key genes, corresponding proteins and their functions may provide valuable background for both basic and clinical research and could be the direction of future studies in immune tolerance, especially those examining immunocyte-induced tolerance.     

向楠治疗亚急性甲状腺炎经验

向楠教授系湖北中医药大学二级教授、主任医师、博士生导师,湖北中医名师、首届湖北省中青年知名中医、武汉中青年中医名医,培养学术继承人及硕士、博士等50余名,从事中医临床、教学、科研工作30余载,擅长应用中医药防治内分泌及代谢性疾病。余有幸跟师学习,受益颇深,现将其治疗亚急性甲状腺炎的经验总结于下,与同道共享。     

低密度脂蛋白在2型糖尿病骨质疏松中的作用研究进展

2型糖尿病及骨质疏松已成为我国最主要的慢性代谢性疾病。2型糖尿病常伴有血脂紊乱，常表现为低密度脂蛋白升高，而越来越多的研究表明血脂通过不同的方式影响骨代谢，其机制可能是通过抑制骨髓间充质干细胞成骨分化，通过RANK/RNAKL/OPG信号通路及炎症反应调节破骨细胞等方式调节骨代谢。