Anti fi larial potential of the fruits and leaves extracts of Pongamia pinnata on cattle filarial parasite Setaria cervi

The effect of aqueous and alcohol extracts of the fruits and leaves of Pongamia pinnata (Linn.) Merr. (Syn. Pongamia glabra Vent, leguminosae) on the spontaneous movements of both the whole worm and the nerve-muscle preparation of Setaria cervi and on the survival of micro fi lariae in vitro was studied. The aqueous and alcohol extracts of fruits and the alcohol extract of leaves caused an inhibition of spontaneous movements of the whole worm and the nerve-muscle preparation of S. cervi. The initial stimulatory effect was not observed with the aqueous extract of fruits on the nerve-muscle preparation. The concentration required to inhibit the movements of the whole worm preparation was 250 micro g/mL for aqueous, 120 micro g/mL for alcohol extract of fruits and 270 microgram/mL for alcohol extracts of the leaves. The concentrations of P. pinnata extracts required to produce an equivalent effect on the nerve-muscle preparation were 25 micro g/mL, 5 micro g/mL and 20 micro g/mL, respectively, suggesting a cuticular permeability barrier.     

A placebo-controlled study of tropisetron added to risperidone for the treatment of negative symptoms in chronic and stable schizophrenia

Rational

A growing body of evidence illustrates that 5-HT3 receptor antagonist drugs may be of benefit in the treatment of negative symptoms in schizophrenia.

Objective

The objective of this study was to assess the efficacy and tolerability of tropisetron add-on to risperidone on negative symptoms in patients with chronic stable schizophrenia.

Methods

In a double-blind, placebo-controlled 8-week trial, 40 patients with chronic schizophrenia who were stabilized on risperidone were randomized into tropisetron or placebo add-on groups. Psychotic symptoms were measured using the Positive and Negative Syndrome Scale (PANSS) every 2 weeks. Furthermore, extrapyramidal and depressive symptoms as well as side effects were assessed. The primary outcome measure was the difference in change from baseline of negative subscale scores between the two groups at week 8.

Results

Tropisetron resulted in greater improvement of the total PANSS scores [F(1.860,70.699)?=?37.366, p?<?0.001] as well as negative scores [F(2.439,92.675)?=?16.623, p?<?0.001] and general psychopathology [F(1.767,67.158)?=?4.602, p?=?0.017], but not positive subscale scores [F(1.348, 51.218)?=?0.048, p?=?0.893] compared to placebo. In a multiple regression analysis controlling for positive, extrapyramidal, and depressive symptoms, treatment group (standardized β?=??0.640) significantly predicted changes in primary negative symptoms. The side effect profile did not differ significantly between the two groups.

Conclusion

Tropisetron add-on to risperidone improves the primary negative symptoms of patients with chronic stable schizophrenia.     

Evaluation of the effect of extra-amniotic normal saline infusion alone or in combination with dexamethasone for the induction of labor

AIM: To compare the effect of extra-amniotic normal saline solution infusion on its own, and in combination with dexamethasone on the ripening of the cervix and induction of labor. METHODS: A double-blind randomized clinical trial study was performed at Akbar Abadi Teaching Hospital in Tehran, Iran, between March 2002 and March 2003 on 84 pregnant women at a gestational age of 40 weeks or more, and with a Bishop score 相似文献   

Timely Hepatitis C RNA Testing and Treatment in the Era of Direct-Acting Antiviral Therapy among People with Hepatitis C in New South Wales,Australia

This study aimed to identify the factors associated with timely (within four weeks) HCV RNA testing and timely (within six months) DAA initiation following HCV notification in the DAA era. We conducted a cohort study of people with an HCV notification in NSW, Australia. Notifications of positive HCV serology were linked to administrative datasets. Weights were applied to account for spontaneous clearance. Logistic regression analyses were performed. Among 5582 people with an HCV notification during 2016–2017, 3867 (69%) were tested for HCV RNA, including 2770 (50%) who received timely testing. Among an estimated 3925 people with chronic HCV infection, 2372 (60%) initiated DAA therapy, including 1370 (35%) who received timely treatment. Factors associated with timely HCV RNA testing included age (≥30 years), female sex, non-Aboriginal ethnicity, country of birth being Australia, and no history of drug dependence. Factors associated with timely treatment were age (≥30 years), male sex, non-Aboriginal ethnicity, country of birth being Australia, no history of drug dependence, and HCV/HIV co-infection. In the DAA era, 50% of people with an HCV notification did not receive timely HCV RNA testing. Most people with an HCV infection received therapy; however, DAA initiation was delayed among many.     

On the Morphological Deviation in Additive Manufacturing of Porous Ti6Al4V Scaffold: A Design Consideration

Additively manufactured Ti scaffolds have been used for bone replacement and orthopaedic applications. In these applications, both morphological and mechanical properties are important for their in vivo performance. Additively manufactured Ti6Al4V triply periodic minimal surface (TPMS) scaffolds with diamond and gyroid structures are known to have high stiffness and high osseointegration properties, respectively. However, morphological deviations between the as-designed and as-built types of these scaffolds have not been studied before. In this study, the morphological and mechanical properties of diamond and gyroid scaffolds at macro and microscales were examined. The results demonstrated that the mean printed strut thickness was greater than the designed target value. For diamond scaffolds, the deviation increased from 7.5 μm (2.5% excess) for vertical struts to 105.4 μm (35.1% excess) for horizontal struts. For the gyroid design, the corresponding deviations were larger, ranging from 12.6 μm (4.2% excess) to 198.6 μm (66.2% excess). The mean printed pore size was less than the designed target value. For diamonds, the deviation of the mean pore size from the designed value increased from 33.1 μm (−3.0% excess) for vertical struts to 92.8 μm (−8.4% excess) for horizontal struts. The corresponding deviation for gyroids was larger, ranging from 23.8 μm (−3.0% excess) to 168.7 μm (−21.1% excess). Compressive Young’s modulus of the bulk sample, gyroid and diamond scaffolds was calculated to be 35.8 GPa, 6.81 GPa and 7.59 GPa, respectively, via the global compression method. The corresponding yield strength of the samples was measured to be 1012, 108 and 134 MPa. Average microhardness and Young’s modulus from α and β phases of Ti6Al4V from scaffold struts were calculated to be 4.1 GPa and 131 GPa, respectively. The extracted morphology and mechanical properties in this study could help understand the deviation between the as-design and as-built matrices, which could help develop a design compensation strategy before the fabrication of the scaffolds.     

Fabrication of a graphene-based sensor to detect the humidity and the temperature of a metal body with imprecise data analysis

Graphene is a 2D material with remarkable properties. The present study demonstrates the fabrication of a graphene-based sensor for measuring the temperature and humidity of a metal body. The graphene sensor was fabricated by depositing a thin film of graphene nanoparticles between silver electrodes (separated by ∼50 μm) on a glass substrate. The graphene thin film was characterized by XRD, Raman spectroscopy and UV-vis techniques. The capacitance and resistance for both the relative humidity (in the range of 0–100% RH) and temperature (in the range of 230–310 K) were measured using an LCR meter at 1 kHz in a controlled chamber. The graphene-based sensor expressed high sensitivity with fast response and recovery times for both humidity and temperature with long stability and low hysteresis curves. The sensor was also tested on a metal body, which expressed a good response time. Moreover, the measured data of capacitance and resistance was analyzed with classical and neutrosophic analysis as an application of modern material statistics. It was observed that neutrosophic analysis is more flexible for analyzing the capacitance and resistance of the fabricated sensor.

Graphene is a 2D material with remarkable properties.     

Assessment of Bioceramic Sealer Retreatability and Its Influence on Force and Torque Generation

This study assesses the retreatability of TotalFill bioceramic (TFBC) and AH Plus (AHP) sealers and their impact on retreatment force and torque. Twenty-six premolar teeth with single oval canals were instrumented, obturated using the matched gutta-percha cone technique with one of the tested sealers, and then temporized. After a 6-month incubation at 37 °C and 100% humidity, the canals were retreated with the XP Shaper system. During retreatment, the generated force and torque were measured. Micro-CT scanning was run before and after the retreatment procedure to analyze the remaining obturating materials in the canals. The apically directed maximum force in AHP was higher than that in TFBC. The coronally directed maximum force and the maximum torque were comparable between the groups. A higher amount of remaining obturating materials was found in the AHP compared to that in the TFBC. Based on these findings, endodontic sealer had an influence on retreatability, and the TFBC showed less remaining obturating materials and lower retreatment forces in the apical direction compared to the AHP in extracted teeth with oval canals.