The economic burden of preventable adverse drug reactions: a systematic review of observational studies

Introduction: Adverse drug reactions (ADRs) are an important cause of morbidity and mortality worldwide. They are associated with healthcare costs due to hospital admissions or prolonged length of stay, as well as additional interventions. The aim of this study was to conduct a systematic review of observational studies to evaluate the economic impact of preventable ADRs.

Areas covered: Published observational research investigating the cost of preventable ADRs in Western countries (limited to the USA and European countries).

Expert opinion: Several reviews have been carried out in the field of the ADR epidemiology but fewer reviews have investigated the economic impact of ADRs, and at the time of writing, none has focused on preventable ADRs. The reason why future research should focus on the costs of preventable ADRs is that both the costs and the negative clinical outcomes are preventable, and as such, are a key point of public health policy action. Nevertheless, the present review highlights an important and sobering limitation of published research on the cost of preventable ADRs, of which the major limitation is the heterogeneity in methods and in reporting which limit what can be known through the summarizing work of a systematic review.     

In vitro evaluation of the toxicity and underlying molecular mechanisms of Janus Fe3O4‐TiO2 nanoparticles in human liver cells

Recent studies show that Janus Fe₃O₄‐TiO₂ nanoparticles (NPs) have potential applications as a multifunctional agent of magnetic resonance imaging (MRI) and photodynamic therapy (PDT) for the diagnosis and therapy of cancer. However, little work has been done on their biological effects. To evaluate the toxicity and underlying molecular mechanisms of Janus Fe₃O₄‐TiO₂ nanoparticles, an in vitro study using a human liver cell line HL‐7702 cells was conducted. For comparison, the Janus Fe₃O₄‐TiO₂ NPs parent material TiO₂ NPs was also evaluated. Results showed that both Fe₃O₄‐TiO₂ NPs and TiO₂ NPs decreased cell viability and ATP levels when applied in treatment, but increased malonaldehyde (MDA) and reactive oxygen species (ROS) generation. Mitochondria JC‐1 staining assay showed that mitochondrial membrane permeability injury occurred in both NPs treated cells. Cell viability analysis showed that TiO₂ NPs induced slightly higher cytotoxicity than Fe₃O₄‐TiO₂ NPs in HL7702 cells. Western blotting indicated that both TiO₂ NPs and Fe₃O₄‐TiO₂ NPs could induce apoptosis, inflammation, and carcinogenesis related signal protein alterations. Comparatively, Fe₃O₄‐TiO₂ NPs induced higher signal protein expressions than TiO₂ NPs under a high treatment dose. However, under a low dose (6.25 μg/cm²), neither NPs had any significant toxicity on HL7702 cells. In addition, our results suggest both Fe₃O₄‐TiO₂ NPs and TiO₂ NPs could induce oxidative stress and have a potential carcinogenetic effect in vitro. Further studies are needed to elaborate the detailed mechanisms of toxicity induced by a high dose of Fe₃O₄‐TiO₂ NPs.     

Calcifications in a clear cell mucoepidermoid carcinoma: a case report with histological and immunohistochemical findings

The aim of this study was to report an unusual case of mucoepidermoid carcinoma (MEC) in a 39-year-old woman. The tumor showed a prominent population of clear and intermediate basal cells. Clear cells rarely predominate over other cell types. Such cases are called clear cell variant of MEC. The case also revealed a variable amount of calcified material in the tumor mass. Calcifications are rare in clear cell MEC. These structures were periodic acid-Schiff positive and diastase resistant, excluding glycogen origin. Immunohistochemistry was performed, and the epidermoid component was positive for cytokeratin (CK)7, CK13, CK14, and CK19. The mucous and clear cells presented mild staining for CK7. Cytokeratins 7, 13, and 19 stained luminal cells, and intermediate cells exhibited positivity for CK7, CK14, and vimentin. The origin of the calcifications is speculated to be the result of dystrophic calcification of the amorphous eosinophilic material secreted by intermediate basal cells.     

Application of Lipid Blend-Based Nanoparticulate Scaffold for Oral Delivery of Antihypertensive Drug: Implication on Process Variables and In Vivo Absorption Assessment

Purpose

The aim of the present study was to formulate and optimize lipid blend-based olmesartan medoxomil (OLM) loaded nanoparticulate scaffolds (NLCs) for enhanced oral bioavailability.

Method

The OLM-NLCs were formulated using dependent variables in different concentrations of solid lipid, liquid lipid, surfactant, and co-surfactant by using melt emulsification combined with ultrasonication technique. The formulations were experimentally optimized using a three-factor, three-level statistical design approach. The formulated OLM-NLCs were evaluated for various pharmaceutical quality evaluation parameters and further optimized formulation (OLM-NLCopt) was assessed for release kinetics, thermal behavior, and in vivo absorption assessment.

Result

The optimized formulation (OLM-NLCopt) showed particle size (138.7 nm), PDI (0.18), and entrapment efficiency (83.65%). The comparative in vitro release study revealed OLM-NLCopt showed significantly higher (p?<?0.05) drug release compare to OLM-susp. The in vivo study showed the OLM-NLCopt indicated nearly 3-fold improvement in oral bioavailability vis-a-vis OLM-susp in mice model.

Conclusion

The results of the release study and pharmacokinetic study suggest the potential of OLM-NLCs for improved oral delivery.

     

Novel derivatives of 5-amino-1-cyclopropyl-7-[(3R,5S)3,5-dimethylpiperazine-1-yl]-6,8-difluoro-4-oxo-quinoline-3-carboxylic acid: their synthesis,antimicrobial, antifungal,and urease inhibitory studies

Sparfloxacin (SPFX) or 5-amino-1-cyclopropyl-7-[(3R,5S)3,5-dimethylpiperazine-1-yl]-6,8-difluoro-4-oxo-quinoline-3-carboxylic acid is an orally active synthetic, broad spectrum third generation quinolone, with excellent activity against Gram-positive bacteria with selectivity against anaerobes and atypical pathogens. Three derivatives of SPFX (2, 3, and 4) were synthesized by reacting different aromatic carboxylic acids with SPFX (1). Chemistry involved the formation of amide between reacting species through nucleophilic substitution reactions. The synthesized derivatives were then structurally characterized by IR, NMR, and mass spectroscopic techniques. The antimicrobial activities of these derivatives were evaluated against four Gram-positive, seven Gram-negative bacteria, and six fungi, using SPFX as a reference. Statistical analysis revealed these derivatives as active antimicrobial agents, and 2 was more potent antimicrobial agents than the parent drug as well other fluoroquinolones. Compounds 3 and 4 showed a significant activity against Fusarium solani. Moreover, these three derivatives were evaluated for inhibitory activities against enzyme urease, carbonic anhydrase II, and α-chymotrypsin. Results showed their selectivity against urease enzyme. Based on their nontoxic behavior, these derivatives may be potential agents for further studies.     

Changes in the prescribing pattern of antidepressant drugs in elderly patients: an Italian,nationwide, population-based study

Background

Despite the high use of antidepressants (ADs) among the elderly, there is limited information about the prescribing pattern of these drugs in the Italian elderly population. The aim of this study was to analyze the trend in the use of ADs in the Italian elderly patients in the years 2003-2009, and specifically, to evaluate rates and predictors of AD treatment discontinuation in depressed older patients.

Methods

The nationwide general practice Health Search Database (HSD) was used to identify AD users aged 65 years old and over from 2003 to 2009. ADs were categorized as (1) selective serotonin reuptake inhibitors (SSRIs); (2) serotonin-norepinephrine reuptake inhibitors (SNRIs); (3) tricyclic antidepressants (TCAs); (4) noradrenergic and specific serotonergic antidepressants (NaSSAs); and (5) other ADs. Incidence and prevalence of AD use per 1,000 inhabitants was calculated by drug class and single compound. We also measured rates and predictors of AD discontinuation (i.e., treatment gap?≥?60 days) during the first year of therapy.

Results

Overall, 39,557 AD users ≥65 years (17 % of the total HSD elderly population) were included in the study. SSRIs were increasingly and most frequently prescribed ADs (102.7-195.3 per 1,000 over seven years). The most common indications for AD use were depression and anxiety. Overall, 14 % of AD users continued their AD medication without treatment gaps, 27 % were intermittent AD users and 58 % discontinued their ADs during the first year of follow-up. Specific AD classes such as TCAs and ‘other ADs were found to be predictors of discontinuation. In depressed patients, the use of NaSSas, TCAs and ‘other ADs as well the concomitant use of >5 drugs (other than ADs) and living in Southern Italy were more likely to predict discontinuation.

Conclusion

ADs, especially SSRIs, are widely and increasingly prescribed in elderly Italian patients in recent years. The observed high AD discontinuation rates are likely to impact the achievement of a therapeutic endpoint in depressed patients. Patients who are at high risk of AD discontinuation such as those receiving multi-drug therapy or living in Southern Italy should be monitored more closely to improve benefits of AD treatments.     

Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear

Laser-assisted high speed milling is a subtractive machining method that employs a laser to thermally soften a difficult-to-cut material’s surface in order to enhance machinability at a high material removal rate with improved surface finish and tool life. However, this machining with high speed leads to high friction between workpiece and tool, and can result in high temperatures, impairing the surface quality. Use of conventional cutting fluid may not effectively control the heat generation. Besides, vegetable-based cutting fluids are invariably a major source of food insecurity of edible oils which is traditionally used as a staple food in many countries. Thus, the primary objective of this study is to experimentally investigate the effects of water-soluble sago starch-based cutting fluid on surface roughness and tool’s flank wear using response surface methodology (RSM) while machining of 316 stainless steel. In order to observe the comparison, the experiments with same machining parameters are conducted with conventional cutting fluid. The prepared water-soluble sago starch based cutting fluid showed excellent cooling and lubricating performance. Therefore, in comparison to the machining using conventional cutting fluid, a decrease of 48.23% in surface roughness and 38.41% in flank wear were noted using presented approach. Furthermore, using the extreme learning machine (ELM), the obtained data is modeled to predict surface roughness and flank wear and showed good agreement between observations and predictions.     

The Use of Anodic Oxides in Practical and Sustainable Devices for Energy Conversion and Storage

This review addresses the main contributions of anodic oxide films synthesized and designed to overcome the current limitations of practical applications in energy conversion and storage devices. We present some strategies adopted to improve the efficiency, stability, and overall performance of these sustainable technologies operating via photo, photoelectrochemical, and electrochemical processes. The facile and scalable synthesis with strict control of the properties combined with the low-cost, high surface area, chemical stability, and unidirectional orientation of these nanostructures make the anodized oxides attractive for these applications. Assuming different functionalities, TiO₂-NT is the widely explored anodic oxide in dye-sensitized solar cells, PEC water-splitting systems, fuel cells, supercapacitors, and batteries. However, other nanostructured anodic films based on WO₃, Cu_xO, ZnO, NiO, SnO, Fe₂O₃, ZrO₂, Nb₂O₅, and Ta₂O₅ are also explored and act as the respective active layers in several devices. The use of AAO as a structural material to guide the synthesis is also reported. Although in the development stage, the proof-of-concept of these devices demonstrates the feasibility of using the anodic oxide as a component and opens up new perspectives for the industrial and commercial utilization of these technologies.