Association Study of Matrix Metalloproteinases Gene Polymorphisms with Susceptibility to Rheumatoid Arthritis: A Meta-Analysis

Objective: Association of matrix metalloproteinases (MMPs) gene polymorphisms with rheumatoid arthritis is controversial. We conduct a meta-analysis to clarify this dispute.

Methods: We systematically searched the electronic PUBMED, EMBASE and CNKI databases for research articles about MMPs (MMP-1, MMP-2, MMP-3, MMP-9) gene polymorphisms and rheumatoid arthritis (RA) up to January 2015. According to the heterogeneity, fixed-effects or random-effects models were used to calculate crude odds ratios (ORs) and 95% confidence intervals (95% CIs).

Results: A total of 11 articles involving 2143 cases and 2049 controls were included in this meta-analysis. Overall, no significant associations were observed between MMP-1-1607 1G/2G polymorphism and RA. Stratification by ethnicity, no significant associations were observed in Caucasian populations. Similarly, no significant associations were observed between MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms and RA in overall and Caucasian populations, respectively. However, a weak association was found between MMP-2-1306 C/T polymorphism and RA (C vs. T, OR?=?0.813, 95%CI?=?0.694–0.953, p?=?0.010) in overall populations.

Conclusions: The present meta-analysis suggests that MMP-1-1607 1G/2G, MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms are not associated with the susceptibility of RA, but MMP-2 -1306 C/T is weakly associated with susceptibility to RA. Further studies with more sample size are needed for definitive conclusions.     

Pseudocystic pilomatricoma: A new variant and review of the literature

A classic pilomatricoma, which usually presents with an asymptomatic, solitary, firm, subcutaneous nodule in the head, neck, or extremities of the paediatric population, is easily diagnosed based on its characteristic clinical and histopathological features. However, its variants often pose particular diagnostic challenges to clinicians due to their rarity and diverse clinicopathological features. We present a new pseudocystic variant, manifesting as solid lesions floating in a fluid‐filled sac.     

腹股沟疝一侧术后对侧发病的时间间隔分析

目的探讨腹股沟疝一侧术后对侧发生腹股沟疝的时间间隔,并对其进行分析。方法回顾医院2012年5月—2019年9月收治的腹股沟疝患者37例,所有患者对侧均有腹股沟疝手术史,将2次发病的时间间隔分为3组,T≤2年为短期组,2相似文献   

改良三点式重睑成形术的临床应用研究

目的:探讨改良三点式重睑术的临床应用疗效。方法:2012年6月-2019年6月,共165例单睑患者采用了改良三点式重睑术,沿术前标记线将三点处皮肤切开,剪刀将切口下唇的眼轮匝肌适当去除,同时将切口与切口在皮下层打通,剪除切口与切口之间的眼轮匝肌,6-0可吸收线挂睑板前筋膜或提上睑肌腱膜及切口下唇皮下组织缝合,三点切口各缝1针。再用6-0单丝尼龙线按照常规重睑线缝合方法挂切口下唇皮肤、睑板前筋膜或提上睑肌腱膜及切口上唇皮肤缝合打结,三点切口各缝1针。伴内眦赘皮者同时行内眦赘皮矫正术。结果:152例患者获得随访,随访患者大部分获得了比较满意的重睑,睁眼重睑流畅、自然,闭眼刀口痕迹不明显。2例患者出现内侧重睑线变浅,1例患者出现外侧重睑线变浅,所有患者均未出现重睑消失。5例患者双侧重睑线有轻度不对称。患者总体满意率为94.7%(144/152)。结论:改良三点式重睑术具有创伤小、并发症少、效果逼真、不易脱落、手术痕迹不明显等优点,值得推广应用。     

足趾移植长手指全形再造术的临床应用

目的探讨足趾移植长手指全形再造手术的临床疗效。方法自2015年6月至2019年6月,对16例因外伤致手指缺损患者采用足趾移植长手指全形再造术,术后评估供区及受区的感觉功能、运动功能及外观形态,分析指甲畸形及增生性瘢痕的发生情况,并记录术后发生感染、血肿、皮片坏死及供区愈合不良等情况;通过调查问卷的方式分析患者的满意度。结果所有患者术后获随访1~12个月,其中2例受区发生感染,1例受区皮片边缘发生坏死,经换药后予以缓解;其余患者的供、受区均未出现长时间的痛疼感觉,受区感觉功能恢复达87.50%,受区运动功能恢复均较满意,手指外形基本满意。供区感觉受影响者2例,运动功能受限者1例,外形一般者2例。所有患者无指甲畸形及增生性瘢痕发生;满意者1例,基本满意者14例,不满意者1例。结论采用足趾移植长手指全形再造手术,基本可以满足患者及医师对于缺损手指进行完美修复的目标。     

中国X连锁视网膜色素变性家系RPGR新突变

目的 检测分析被诊断为X连锁视网膜色素变性（XLRP）的三个中国家系内的基因突变。设计 基因研究。研究对象 三个中国XLRP家系共27位受试者（其中18人为男性）。方法 由同一医生收集家系成员的详细临床资料并进行眼部检查，采集三个家系的先证者及有条件采血者的外周静脉血，提取基因组DNA。应用PCR技术扩增RPGR和RP2基因的全部外显子和内含子交界区序列，包括RPGR基因15号外显子开放阅读框，产物直接测序进行突变分析。主要指标 临床特征及基因测序结果。结果 基因筛查证实了两个RPGR基因的新型无义突变(c.1541C>G;p.S514X 和 c.2833G>T;p.E945X) 及一个错义突变(c.607G>C;p.A203P)。基因型-表型的相关性分析表明家系3患者在接近ORF15下游位置存在突变，这种突变导致视锥细胞功能的早期丧失。ORF15无义突变的女性携带者临床表型重，呈现出部分显性遗传的特点。结论 本研究证实了三种RPGR基因的新型突变，这一结果扩展了RPGR的突变谱及表型谱。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.