Polymer latexes for cell-resistant and cell-interactive surfaces

Novel polymer latexes were prepared that can be applied in several ways for the control and study of cell behavior on surfaces. Acrylic latexes with glass transitions ranging from -30 to 100 degrees C were synthesized by dispersion polymerization in a water and alcohol solution using an amphiphilic comb copolymer as a stabilizing agent. The comb had a poly(methyl methacrylate) backbone and hydrophilic poly(ethylene glycol) (PEG) side chains, which served to stabilize the dispersion and create a robust hydrophilic coating on the final latex particles. The end groups of the comb stabilizer can be selectively functionalized to obtain latex particles with a controlled density of ligands tethered to their surfaces. Latexes were prepared with adhesion peptides (RGD) linked to the surface of the acrylic beads to induce attachment and spreading of cells. Coalesced films obtained from the RGD-bearing latex particles promoted attachment of WT NR6 fibroblasts, while films from unmodified latex particles were resistant to these cells. Additionally, RGD-linked beads were embedded in cell-resistant comb polymer films to create cell-interactive surfaces with discrete clustered-ligand domains. Cell attachment and morphology were seen to vary with the surface density of the RGD-bearing latex beads.     

Epitope mapping of dengue 1 virus E glycoprotein using monoclonal antibodies

Summary Ten monoclonal antibodies (MAbs) were raised against dengue 1 (DEN 1, Hawaii) virus E glycoprotein. Specificity of the MAbs was tested by ELISA and immunofluoresence. Eight were DEN 1 type-specific, one was DEN group-reactive (DGR) and one was flavivirus cross-reactive (FCR). Two of these type specific MAbs exhibited haemagglutination-inhibition (HI) and neutralized (N) DEN 1 virus in vivo (HS). These two MAbs showed 100% protection against a challenge of 100 LD₅₀ of DEN 1 virus in adult Swiss albino mice. The remaining six MAbs were HI negative, N negative and non-protective against challenge (NHS). Of these only three were reactive in the CF test. The DGR, FCR and one of the NHS MAbs (NHS-3) did not react with DEN 1 virus grown in Vero cells, whereas they reacted with DEN 1 virus grown in LLC-MK2 and C6/36 cells in immunofluorescence, probably indicating a difference in the synthesis/processing of viral proteins in these different cell lines. An epitope map of the E gp was drawn using a computer programme based on the additivity index values. The epitope map delineated five domains, a) S-I representing type-specific, HI positive, N positive and protecting MAbs. b) S-II representing type-specific, HI negative, N negative MAbs. c) S-III representing type-specific HI/N negative MAb, but distinct from S-II. d) DGR representing HI/N negative DEN group reactive MAb. e) FCR representing HI/N negative flavivirus cross-reactive MAb. Epitope analysis of a number of different DEN 1 strains isolated in India over a period of 30 years showed that the domains S-II and S-III which react with HI negative, DEN-1 specific MAbs were variable. The DGR domain and the S-I domains were conserved.     

Identification of some antigenically related outer-membrane proteins of strains of Vibrio cholerae O1 and non-O1 serovars involved in intestinal adhesion and the protective role of antibodies to them

Outer-membrane proteins (OMPs) of Vibrio cholerae strains of O1 and non-O1 serovars were studied. Marked similarity was found in the OMP profiles of different V. cholerae O1 strains but the OMP profile of a non-O1 strain was somewhat different. Antigenic relatedness between the OMPs of different V. cholerae strains was established by enzyme-linked immunosorbent assay (ELISA). Immunoblotting experiments demonstrated that at least two OMPs of 36 and 25-26 Kda were immunogenic and common to strains of O1 and non-O1 serovars. Antiserum raised against the outer membrane of a V. cholerae strain, and rendered specific for its OMP by absorption with lipopolysaccharide, inhibited in vitro the intestinal adhesion of the homologous and heterologous strains of V. cholerae irrespective of their biotype, serotype and serovar. Furthermore, antiserum to OMPs induced passive protection against vibrio challenge in rabbit ileal loop experiments. These results suggest that the OMPs may be useful in immunoprophylaxis against cholera.     

Primary gastric T-cell lymphoma of suppressor-cytotoxic (CD8+) phenotype: discordant expression of T-cell receptor subunit beta F1, CD7, and CD3 antigens.

Primary gastric T-cell lymphomas are rare neoplasms, and all but one of the previously phenotyped cases have shown a helper-inducer phenotype. The present case is the second reported case of a primary gastric T-cell lymphoma of suppressor-cytotoxic phenotype. The tumor histology was similar to that described in some forms of node-based peripheral T-cell lymphomas. Phenotypic analysis revealed low expression of pan-T marker CD7, reduced expression of CD3, but higher density and frequency of expression of CD8 antigens that could be predicted on the basis of the pan-T markers. Natural killer cell (NK) related markers CD16, HNK-1 and NKH-1 were not expressed by the neoplastic cells. T-cell receptor (TCR) beta subunit expression was detected on fewer cells than would have been predicted on the basis of CD3 and CD8 expression, and TCR delta chain expression was undetectable.     

Novel Semi‐Fluorinated Poly(ether imide)s Derived From 4‐(p‐Aminophenoxy)‐3‐trifluoromethyl‐4′‐aminobiphenyl

An unsymmetrical diamine monomer 4‐(p‐aminophenoxy)‐3‐trifluoromethyl‐4′‐aminobiphenyl has been synthesized successfully. This monomer leads to the synthesis of different novel poly(ether imide)s when reacted with different dianhydrides like pyromellatic dianhydride (PMDA), benzophenone tetracarboxylic acid dianhydride (BTDA), 2,2‐bis(3,4‐dicarboxyphenyl) hexafluoropropane (6FDA), and oxy diphthalic anhydride (ODA). The poly(ether imide) prepared from this monomer on reaction with 6FDA is soluble in several organic solvents such as N‐methylpyrolidinone (NMP), dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), tetrahydrofuran (THF), and CHCl₃. The poly(ether imide)s prepared from BTDA and ODA are soluble in NMP, DMF, and DMAc but not in THF or CHCl₃, whereas the polymer prepared from PMDA is soluble only in NMP. The water uptake value for these poly(ether imide) films is very low (0.2–0.5%), and exhibited low dielectric constants (2.81 at 1 MHz). The polymers exhibited high thermal stability up to 532 °C in air for 5% weight loss, and high glass transition temperatures up to 288 °C. The polymer exhibited high tensile strength up to 135 MPa, modulus 3.2 GPa, and elongation at break up to 25%, depending on the exact polymer structure.

The structure of the poly(ether imide) synthesised from 4‐(p‐aminophenoxy)‐3‐trifluoromethyl‐4′‐aminobiphenyl and 2,2‐bis(3,4‐dicarboxyphenyl) hexafluoropropane. This polymer was soluble in many organic solvents.     

Survival prediction of glioblastoma patients—are we there yet? A systematic review of prognostic modeling for glioblastoma and its clinical potential

Glioblastoma is associated with a poor prognosis. Even though survival statistics are well-described at the population level, it remains challenging to predict the prognosis of an individual patient despite the increasing number of prognostic models. The aim of this study is to systematically review the literature on prognostic modeling in glioblastoma patients. A systematic literature search was performed to identify all relevant studies that developed a prognostic model for predicting overall survival in glioblastoma patients following the PRISMA guidelines. Participants, type of input, algorithm type, validation, and testing procedures were reviewed per prognostic model. Among 595 citations, 27 studies were included for qualitative review. The included studies developed and evaluated a total of 59 models, of which only seven were externally validated in a different patient cohort. The predictive performance among these studies varied widely according to the AUC (0.58–0.98), accuracy (0.69–0.98), and C-index (0.66–0.70). Three studies deployed their model as an online prediction tool, all of which were based on a statistical algorithm. The increasing performance of survival prediction models will aid personalized clinical decision-making in glioblastoma patients. The scientific realm is gravitating towards the use of machine learning models developed on high-dimensional data, often with promising results. However, none of these models has been implemented into clinical care. To facilitate the clinical implementation of high-performing survival prediction models, future efforts should focus on harmonizing data acquisition methods, improving model interpretability, and externally validating these models in multicentered, prospective fashion.

     

AIDS in obstetric practice

After a brief review of the AIDS virus, its transmission, and clinical aspects, the obstetric implications of HIV infections for a developing country like India are summarized. HIV, the virus that causes AIDS, is transmissible in utero with a 66% risk of infecting the fetus, and may cause intrauterine growth retardation or prematurity. HIV positive pregnant women may become immunosuppressed, so they should be offered pregnancy termination. A woman in labor infected with HIV should be managed like a woman with hepatitis B: intrauterine catheters, fetal scalp electrodes, and fetal blood sampling are contraindicated. Forceps and episiotomy should be used only if needed. Cesarean section to prevent intrapartum infection of the fetus is controversial. While breastfeeding is allowed, breast milk should not be donated to other infants. Nursing staff should be informed that HIV is much less transmissible than hepatitis.     

Phosphorus-Containing Fluoro-Sulfonated Polytriazole Membranes with High Proton Conductivity: Understanding Microstructural and Thermomechanical Behaviors as a Function of Degree of Sulfonation

The current article describes the design and synthesis of a new series of phosphorus-containing fluoro-sulfonated polytriazoles through click polymerization. The synthesized copolytriazoles (PTPFDSH-70 to 90) with different degrees of sulfonation (DS) from 70% to 90% are structurally interpreted by various spectroscopic techniques (¹H, ¹³C, and FTIR). The high molecular weight (weight average molecular weight as high as 77 500 g mol⁻¹ with polydispersity index of 2.29) polymers exhibits excellent mechanical (elongation at break up to 95%), thermal (10% decomposition temperature: 266–317 °C), and oxidative (>14.5 h) stability. The PTPFDSH-70 to 90 possess outstanding water-holding ability in hydrated conditions (swelling ratio [in-plane]: 6.2–7.3% at 80 °C). The microstructural alterations by their thermal relaxations and transitions with increasing DS in the polymers have been thoroughly investigated by dynamic mechanical analysis. The atomic force microscopy and transmission electron microscope images of the PTPFDSH-70 to 90 polymer membranes demonstrated the phase segregated interconnected ionic cluster-like morphology between hydrophilic and hydrophobic domains. The PTPFDSH-90 (DEB:PFAZ:DSAZ = 100:10:90) polymer membrane displays the proton conductivity (176 and 190 ms cm⁻¹ at 80 and 90 °C, respectively) higher than Nafion117 under similar test conditions.