Depression-free day to utility-weighted score: is it valid?

BACKGROUND: Cost-utility analyses using formulas to convert depression-free days (DFDs) to utility-weighted scores are increasingly common. These formulas are based on linear extrapolation of data documenting the correlation between depression symptom severity and generic health-related quality of life. OBJECTIVE: We sought to examine the validity of formulas converting DFDs to utility weights. METHODS: We undertook an observational study with data collection at baseline, 1 week and 1, 3, 6, 9, and 12 months on 77 subjects (42 inpatient, 35 outpatient) diagnosed with current major depression. Subjects were divided into treatment response categories based on changes in depression severity. Depression severity measures used were the Hamilton Rating Scale for Depression (HAM-17) and Beck Depression Inventory (BDI) and the health-related quality of life measure was the self-administered Quality of Well-Being scale (QWB-SA). DFD calculations were based on depression severity scores and converted to utility weights using available formulas. Utility-weighted data collected over the course of 1 year were used to estimate quality-adjusted life years (QALYs). RESULTS: QALYs estimated from the QWB-SA were significantly lower than those based on utility-weighted DFD calculations but the incremental QALYs were not significantly different. Using a slightly lower utility-weighted conversion factor for the BDI or a larger BDI severity range to calculate DFDs resulted in a better fit compared with the QWB-SA. CONCLUSIONS: Our results support the validity of the existing HAM-17 utility-weighted formula and suggest modifications for the BDI formula. If generic health-related quality of life measures are not available for conducting cost-utility analyses of depression interventions then the existing HAM-17 and modified BDI formulas appear to be reasonable alternatives.     

Neuropeptide Y Attenuates Stress‐Induced Bone Loss Through Suppression of Noradrenaline Circuits

Chronic stress and depression have adverse consequences on many organ systems, including the skeleton, but the mechanisms underlying stress‐induced bone loss remain unclear. Here we demonstrate that neuropeptide Y (NPY), centrally and peripherally, plays a critical role in protecting against stress‐induced bone loss. Mice lacking the anxiolytic factor NPY exhibit more anxious behavior and elevated corticosterone levels. Additionally, following a 6‐week restraint, or cold‐stress protocol, Npy‐null mice exhibit three‐fold greater bone loss compared to wild‐type mice, owing to suppression of osteoblast activity. This stress‐protective NPY pathway acts specifically through Y2 receptors. Centrally, Y2 receptors suppress corticotropin‐releasing factor expression and inhibit activation of noradrenergic neurons in the paraventricular nucleus. In the periphery, they act to control noradrenaline release from sympathetic neurons. Specific deletion of arcuate Y2 receptors recapitulates the Npy‐null stress response, coincident with elevated serum noradrenaline. Importantly, specific reintroduction of NPY solely in noradrenergic neurons of otherwise Npy‐null mice blocks the increase in circulating noradrenaline and the stress‐induced bone loss. Thus, NPY protects against excessive stress‐induced bone loss, through Y2 receptor‐mediated modulation of central and peripheral noradrenergic neurons. © 2014 American Society for Bone and Mineral Research.     

The use of 7-amino actinomycin D in identifying apoptosis: simplicity of use and broad spectrum of application compared with other techniques

The detection and quantitation of apoptotic cells is becoming increasingly important in the investigation of the role of apoptosis in cellular proliferation and differentiation. The pathogenesis of hematologic disorders such as aplastic anemia and the development of neoplasia are believed to involve dysregulation of apoptosis. To quantitate accurately the proportion of apoptosis cells within different cell types of a heterogeneous cell population such as blood or bone marrow, a method is required that combines the analysis of large numbers of cells with concurrent immunophenotyping of cell surface antigens. In this study, we have evaluated such a method using the fluorescent DNA binding agent, 7-amino actinomycin D (7AAD), to stain three diverse human cell lines, induced to undergo apoptosis by three different stimuli. Flow cytometric analysis defines three populations on the basis of 7AAD fluorescence and forward light scatter. We have shown by cell sorting and subsequent morphological assessment and terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate nick end labeling that the populations defined by 7AAD represent live, apoptotic, and late-apoptotic/dead cells. This method is quick, simple, reproducible, and cheap and will be a valuable tool in the investigation of the role of apoptosis in normal physiology and in disease states.     

Semiautomated determination of minimum bactericidal concentrations of antibiotics

Using a newly devised 50-channel photometer which records the opacity of growing bacterial cultures, it was shown that the time taken by cultures diluted 1/1000 in fresh broth to reach 50% of the opacity of a fully grown culture was inversely related to the concentration of organisms in the original culture. This relation was used to determine the numbers of survivors after exposure to benzylpenicillin and gentamicin alone and in combination. The procedure is commended as a labour-saving and potentially rapid method of obtaining comprehensive information on the bactericidal action and interaction of antibiotics.     

Airway intervention in adult supraglottitis

Background The timing of aggressive airway intervention in adult epiglottitis is controversial. Aims To correlate Friedman’s staging of epiglottitis on admission with the airway interventions undertaken. Methods A retrospective study of 23 adult patients, mean age 51 years (range 29–81 years), who had been admitted with acute supraglottitis between March 1988 and December 2000 was undertaken. Results Three patients (13%) had airway interventions; two with tracheostomy and one with tracheal intubation. All were Friedman stage III and had rapid symptom progression during the 24 hours prior to admission. Three other stage III patients with symptom progression longer than 24 hours and all the remaining patients (stage II or less) were managed with observation and intravenous therapy. Conclusions Friedman originally advocated airway intervention in any patient stage II or worse, but this intubation threshold should probably be lowered to those patients with rapid-onset stage III (moderate respiratory distress, stridor, respiratory rate >30 per minute, pCO₂ >45mmHg) disease.     

Phytochemical studies on Stemona burkillii prain: two new dihydrostemofoline alkaloids

Two new dihydrostemofoline alkaloids, 11(S),12(R)-dihydrostemofoline (3) and stemoburkilline (4), along with stemofoline (1) and 2'-hydroxystemofoline (2) have been isolated from a root extract of Stemona burkillii Prain. The structure and relative configuration of 3 have been determined via spectroscopic data and from comparison with synthetic 11(S),12(S)-dihydrostemofoline (5). The configuration of the exo-cyclic alkene group in 4 is tentively assigned as E on the basis of mechanistic considerations.     

Evaluation of the Abbott Investigational Use Only RealTime Hepatitis C Virus (HCV) Assay and Comparison to the Roche TaqMan HCV Analyte-Specific Reagent Assay

The accurate and sensitive measurement of hepatitis C virus (HCV) RNA is essential for the clinical management and treatment of infected patients and as a research tool for studying the biology of HCV infection. We evaluated the linearity, reproducibility, precision, limit of detection, and concordance of viral genotype quantitation of the Abbott investigational use only RealTime HCV (RealTime) assay using the Abbott m2000 platform and compared the results to those of the Roche TaqMan Analyte-Specific Reagent (TaqMan) and Bayer Versant HCV bDNA 3.0 assay. Comparison of 216 samples analyzed by RealTime and TaqMan assays produced the following Deming regression equation: RealTime = 0.940 (TaqMan) + 0.175 log₁₀ HCV RNA IU/ml. The average difference between the assays was 0.143 log₁₀ RNA IU/ml and was consistent across RealTime''s dynamic range of nearly 7 log₁₀ HCV RNA IU/ml. There was no significant difference between genotypes among these samples. The limit of detection using eight replicates of the World Health Organization HCV standard was determined to be 7.74 HCV RNA IU/ml by probit analysis. Replicate measurements of commercial genotype panels were significantly higher than TaqMan measurements for most samples and showed that the RealTime assay is able to detect all genotypes with no bias. Additionally, we showed that the amplicon generated by the widely used Roche COBAS Amplicor Hepatitis C Virus Test, version 2.0, can act as a template in the RealTime assay, but potential cross-contamination could be mitigated by treatment with uracil-N-glycosylase. In conclusion, the RealTime assay accurately measured HCV viral loads over a broad dynamic range, with no significant genotype bias.Methods for accurate quantitation of serum and plasma hepatitis C virus (HCV) RNA levels have become key tools both for understanding the biology of HCV infection and for the clinical management of patients under treatment. The ability to predict likelihood of response to combination interferon/ribavirin therapy by assessing rates of HCV viral load decline has provided a more individualized treatment algorithm that can identify nonresponsive patients early in treatment, sparing them significant morbidity and cost. New algorithms that examine the kinetics of HCV viral decline provide an even more refined tool for management and complement the information provided by HCV genotype determination. Finally, HCV viral kinetics data are essential for the understanding of new therapeutics such as the class of protease inhibitors. For all applications, accurate quantitation of all HCV types over a broad dynamic range is critical. The advent of real-time PCR methods provides a powerful tool for a broad dynamic range of quantitation of viruses; however, targets such as HCV require careful assay design to avoid errors due to sequence variations intrinsic to RNA viruses.Abbott Molecular, Inc. (Des Plaines, IL), recently released the m2000 system and tests for human immunodeficiency virus type 1, HCV, and chlamydia/gonorrhea (Chlamydia trachomatis/Neisseria gonorrhea) in the European Union with Conformité Européene-marked certification, and the system was recently approved for human immunodeficiency virus type 1 by the U.S. Food and Drug Administration. The m2000 system consists of an eight-channel liquid handling platform (the m2000sp) for performing automated nucleic acid extraction and PCR preparation and of a real-time PCR platform (the m2000rt) for detection and quantification. We used the m2000 system to evaluate the sensitivity, reproducibility, linearity, and concordance of viral genotype quantitation of the Abbott Molecular investigational use only (IUO) RealTime HCV (RealTime) assay and compared aspects of its performance to the Roche TaqMan Analyte-Specific Reagent (ASR) (TaqMan) (Roche Molecular Systems, Inc., Branchburg, NJ) and Bayer Versant HCV bDNA 3.0 (bDNA) assay. In addition, we examined the potential for contamination by the Roche COBAS Amplicor Hepatitis C Virus Test, version 2.0 (Amplicor) (Roche Molecular Systems, Inc., Branchburg, NJ) and TaqMan amplicons and the effect of uracil-N-glycosylase (UNG) treatment in mitigating contamination from these widely used tests.     

High-speed atomic force microscopy of dental enamel dissolution in citric acid

High-speed atomic force microscopy (HS AFM) in 'contact' mode was used to image at video rate the surfaces of both calcium hydroxyapatite samples, often used as artificial dental enamel in such experiments, and polished actual bovine dental enamel in both neutral and acidic aqueous environments. The image in each frame of the video of the sample was a few micrometers square, and the high-speed scan window was panned across the sample in real time to examine larger areas. Conventional AFM images of the same regions of the sample were also recorded before and after high-speed imaging. The ability of HS AFM to follow processes occurring in liquid on the timescale of a few seconds was employed to study the dissolution process of both hydroxyapatite and bovine enamel under acidic conditions. Buffered citric acid at pH values between 3.0 and 4.0 was observed to dissolve the surface layers of these samples. The movies recorded showed rapid dissolution of the bovine enamel in particular, which proceeded until the relatively small amount of acid available had been exhausted. A comparison was made with enamel samples that had been treated in fluoride solution (1 h in 300 ppm NaF, pH 7) prior to addition of the acid; the speed of dissolution for these samples was much less than that of the untreated samples. The HS AFM used an in-house designed and constructed high-speed flexure scan stage employing a push-pull piezo actuator arrangement. The HS AFM is able to follow the large changes in height (on the micrometer scale) that occur during the dissolution process.