Marginal gap formation of composites in dentine: effect of water storage

This study investigated the effects of water storage on the marginal adaptation of two composite resins (Spectrum TPH and Ariston AT), two polyacid-modified composite resins (Dyract AP and F2000) and a new PRG composite (Reactmer) to dentine over time. Two cylindrical dentine cavities (1.5 mm diameter and 1.5 mm deep) were prepared on the horizontally sectioned surfaces of freshly extracted teeth. In each tooth, one cavity was restored using composites with their respective bonding system and the other without the bonding system. The sample size for each material with/without bonding system was 6. The composites were placed in one increment, bulk-polymerized, immediately finished/polished with the Sof-lex discs system and fine polished on 30 microm silicon carbide/9 microm aluminium oxide lapping film discs in a microgrinding system. The specimens were then stored in distilled water at 37 degrees C and the maximum marginal gap width between the material and the dentine wall was determined at 24 h, 1 week, 2 weeks, 3 weeks and 4 weeks using a measurescope at x500 magnification. Results were subjected to statistical analysis using monva, anova/Scheffe's post hoc test and independent samples of t-test at significance level 0.05. At all time intervals, no significant difference in marginal gap formation was observed between materials. Where bonding systems were not used, a decrease in gap widths over time was observed with most materials but only Dyract AP exhibited a significant decrease. The latter was observed after 2 weeks storage in water. The use of bonding systems reduced dentine marginal gaps significantly and is therefore mandatory for all composites evaluated. Marginal gaps arising from polymerization contraction of conventional, polyacid-modified and PRG composites cannot be fully compensated by hydroscopic expansion. Clinical relevance Bonding systems are mandatory for all composites when bonding to dentin. In the event of a bond failure at placement, hygroscopic expansion of composites can reduce marginal gaps but not completely.     

Investigation on the shaping ability of nickel-titanium files when used with a reciprocating motion

Introduction

The introduction of nickel-titanium (NiTi) files into clinical practice has improved the quality of canal shaping, but increasing the curvature of the root canal (or the diameter of the master instrument that prepares the full working length) could result in more transportation, straightening, and aberration of the canal. Nickel-titanium instruments are significantly safer and have an extended cyclic fatigue life when used with a reciprocating movement. The purpose of this study was to compare the shaping ability of FlexMaster NiTi instruments when used in either continuous or reciprocating movements.

Methods

Thirty-two Endo Training Blocks ISO 15, 2% taper, 10-mm radius of curvature, and 70° angle of curvature were prepared, according to the group, with FlexMaster NiTi instruments either in continuous rotation or in reciprocating (60° clockwise, 40° counterclockwise) movement. Preoperative and postoperative images of the simulated canals were taken under standardized conditions. The preoperative and postoperative images were combined exactly. The amount of resin removed was determined both for the inner (convex) and the outer (concave) sides of the curvature at 10 different points.

Results

In the most apical third of the canal, the Continuous group produced the largest enlargement of the canal as compared with the Reciprocating group (P < .05). In the apical third, the Continuous group displayed significantly greater enlargement of the canal at the external side.

Conclusions

The shaping of simulated canals is more centered by using a reciprocating motion when compared with continuous rotation, but the reciprocating motion could be more time-consuming.     

The effect of thermocycling on the bonding of different restorative materials to access opening through porcelain fused to metal restorations

PURPOSE

Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens.

MATERIALS AND METHODS

The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen''s in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at 5℃ and the other at 55℃, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01).

RESULTS

The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C.

CONCLUSION

It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.     

A Longitudinal Survey for Genome-based Identification of SARS-CoV-2 in Sewage Water in Selected Lockdown Areas of Lahore City,Pakistan: A Potential Approach for Future Smart Lockdown Strategy

In 2019, the newly emerged SARS-CoV-2 virus caused pneumonia-like illness. The disease rapidly spread globally, leading to a worldwide outbreak referred to as the COVID-19 pandemic. The affected patients show symptoms of fever, dry cough, respiratory distress, myalgia, and gastrointestinal disturbance. As of April 5, 2021, 132,083,022 people worldwide were affected by COVID-19, while 2,868,454 people died due to the disease[1]. SARS-CoV-2-positive patients may remain asymptomatic or start showing symptoms in 2?14 days after exposure to the virus[2]. The viral infection can be diagnosed from nasopharyngeal, throat, alveolar lavage, lacrimal, blood, and stool samples. The patient starts shedding the virus in stool regardless of being symptomatic or asymptomatic, which makes sewage-based detection of the virus to be more beneficial in the early infection stage.     

Changes in thigh muscle volume predict bone mineral density response to lifestyle therapy in frail,obese older adults

Summary

We studied the relationships among strength, muscle mass, and bone mineral density (BMD) with lifestyle change. Lifestyle therapy consisted of exercise, diet, and diet plus exercise. Diet was by caloric restriction to induce and maintain a weight loss of 10 % from baseline body weight. Exercise attenuated weight loss-induced muscle and bone losses. Exercise improved strength despite muscle loss in patients on diet and exercise. Changes in strength did not correlate with changes in BMD. However, changes in thigh muscle volume correlated with, and predicted changes in hip BMD.

Introduction

Losses of hip BMD and lean body mass are major complications of lifestyle therapy in frail, obese older adults; however, the contribution of mechanical strain loss from muscle loss is poorly defined. We determined the effect of changes in thigh muscle volume and muscle strength on BMD in frail, obese older adults undergoing lifestyle therapy aimed at intentional weight loss with or without exercise.

Methods

One hundred seven obese older adults were randomized to control, diet, exercise, and diet–exercise groups for 1 year. Thigh muscle volume was measured by magnetic resonance imaging, BMD by DXA, knee strength by dynamometry, total strength by one-repetition maximum (1-RM), and bone markers by immunoassay.

Results

Thigh muscle volume decreased in the diet group (?6.2?±?4.8 %) and increased in the exercise group (2.7?±?3.1 %), while it was not significantly different from the control in the diet–exercise group. Changes in hip BMD followed similar pattern as those in thigh muscle volume. Knee extension and flexion increased in the exercise group (23?±?20 %; 25?±?19 %) and diet–exercise group (20?±?19 %; 20.6?±?27 %) but were unchanged in the control and diet groups. Changes in thigh muscle volume correlated with changes in hip BMD (r?=?0.55, P?=?<0.001) and were an independent predictor of changes in hip BMD (β?=?0.12, P?=?0.03) in the multiple regression analyses after accounting for demographic factors and changes in weight and physical activity. There were no correlations between BMD changes and knee strength, 1-RM, and sclerostin changes.

Conclusions

Changes in thigh muscle volume predict hip BMD changes in obese older patients undergoing lifestyle therapy. The effect of exercise in attenuating thigh muscle loss when added to diet may in part account for the reduction in weight loss-induced bone loss in the diet–exercise group.     

Electrolyte and Haemogram changes post large volume liposuction comparing two different tumescent solutions

Background:

The most common definitions of large volume liposuction refer to total 5 l volume aspiration during a single procedure (fat plus wetting solution). Profound haemodynamic and metabolic alterations can accompany large volume liposuction. Due to paucity of literature on the effect of different tumescent solutions on the electrolyte balance and haematological changes during large volume liposuction, we carried out this study using two different wetting solutions to study the same.

Materials and Methods:

Total 30 patients presenting with varying degrees of localized lipodystrophy in different body regions were enrolled for the study. Prospective randomized controlled trial was conducted by Department of Plastic and Cosmetic Surgery, Sir Ganga Ram Hospital, New Delhi from January 2011 to June 2012. Patients were randomized into two groups of 15 patients each by using computer generated random numbers. Tumescent formula used for Group A (normal saline [NS]) was our modification of Klein''s Formula and Tumescent formula used for Group B (ringer lactate [RL]) was our modification of Hunstadt''s formula. Serum electrolytes and hematocrit levels were done at preinduction, immediate postoperative period and postoperative day 1.

Result:

Statistical analysis was performed using SPSS software version 15.0. Which showed statistically significant electrolytes and hematocrit changes occur during large volume liposuction.

Conclusion:

Statistically significant electrolytes and hematocrit changes occur during large volume liposuction and patients should be kept under observation of anaesthesist for at least 24 h. Patients require strict monitoring of vital parameters and usually Intensive Care Unit is not required. There was no statistical difference in the electrolyte changes using NS or RL as tumescent solution and both solutions were found safe for large volume liposuction.KEY WORDS: Electrolyte changes during liposuction, haemogram changes during liposuction, large volume liposuction