In vitro evaluation of the dissolving effect of solvents on root canal sealers

The purpose of this in vitro study was to evaluate two commonly used gutta-percha solvents for their effectiveness in dissolving several types of root canal sealers. Seven different sealers (AH26, AH Plus, Diaket, Roekoseal, Sankin Apatite Root Sealer, Sealapex, and Sultan U/P) were used in this study. After mixing according to the manufacturers' directions, each material was syringed into 30 glass capillary tubes, and a total of 210 tubes were placed in a humidifier at 37 degrees C for one week to allow the materials to set completely. Each group of 30 tubes, obturated with one type of sealer, was then randomly divided into three subgroups, including 10 tubes each. Chloroform was used in the first ten tubes from each sealer group. Halothane was used for the second group. In the last group, the sealer was removed with files, without using any solvent. The time necessary to pass a file through to the end of the tube was recorded for each sample in seconds. Results were analyzed using one-way analysis of variance. Sealapex did not set at all unless in contact with air. Roekoseal did not adhere to the glass capillary tubes, and was therefore easily removed from the tube in all samples. AH26 and AH Plus root canal sealers tightly adhered to the tube walls, so none of the techniques were effective in removing them from the tubes within 30 min. Diaket root canal sealer was easily removed using solvents (P < 0.05). There was no advantage in using solvents to remove Sankin Apatite Root Sealer (P > 0.05). Solvents were found to be very effective in dissolving the Sultan U/P root canal sealer (P < 0.05).     

Articaine and lidocaine mandibular buccal infiltration anesthesia: a prospective randomized double-blind cross-over study

This randomized crossover double-blind trial compared the efficacy of buccal infiltration with 4% articaine and 2% lidocaine (both with 1:100,000 epinephrine) in securing mandibular first molar pulp anesthesia. Injections were given at least 1 week apart in 31 healthy adult volunteers. Electronic pulp testing was undertaken at baseline and at 2 minute intervals until 30 minutes postinjection. A successful outcome was recorded in the absence of pulp sensation on two consecutive maximal pulp tester stimulations (80 muA). 64.5% of articaine and 38.7% of lidocaine infiltrations were successful (p = 0.008). Articaine infiltration produced significantly more episodes of no response to maximum stimulation in first molars than lidocaine (236 and 129, respectively, p < 0.001). Mandibular buccal infiltration is more effective with 4% articaine with epinephrine compared to 2% lidocaine with epinephrine. Both injections were associated with mild discomfort.     

Effect of light-emitting diode on bond strength of orthodontic brackets

The aim of this study was to evaluate the effect of light-emitting diode (LED) light curing on shear bond strength (SBS) of orthodontic brackets bonded to teeth. Light exposure of 40 seconds from a conventional halogen-based light-curing unit was used as a control. Eighty human premolars were divided into four groups of 20 each. Brackets were bonded to acid-etched teeth with Transbond XT light-cured adhesive. In the first group, the adhesive was light cured for 40 seconds with a conventional halogen unit (XL3000, 3M). In the other three groups, adhesive was cured with a commercial LED unit (Elipar FreeLight, 3M ESPE) for 10, 20, or 40 seconds. SBS of brackets was measured on a universal testing machine and recorded in megapascals. Adhesive remnant index (ARI) scores were determined after failure of brackets. Data were analyzed using analysis of variance and chi-square tests. No statistically significant differences were found among the SBS values of halogen-based light-cured (13.1 +/- 3.1 MPa) and 20- and 40-second LED-cured (13.9 +/- 4.8 MPa and 12.7 +/- 5.1 MPa) specimens (P > .05). However, 10 seconds of LED curing yielded significantly lower SBS (P < .05). No statistically significant differences were found between the ARI scores among groups. The results of this study are promising for the orthodontic application of LED-curing units, but further compatibility and physical characteristic studies of various orthodontic adhesives and clinical trials should be performed before validation.     

Vascular endothelial growth factor in gingival tissues and crevicular fluids of diabetic and healthy periodontal patients

BACKGROUND: Periodontal disease is one of the major oral problems encountered in patients with diabetes mellitus (DM). Vascular changes, neutrophil dysfunction, altered collagen synthesis, and genetic predisposition observed in DM may contribute to periodontitis; and the vascular alterations observed in such patients may depend on vascular endothelial growth factor (VEGF) actions. Few reports are available about the mechanism of neovascularization and the angiogenic factors that contribute to the periodontal pathology and the role of VEGF in periodontal diseases. The aim of this study is to compare VEGF expression in healthy and periodontally diseased tissues with gingival crevice fluid (GCF) of healthy persons and diabetic patients. METHODS: Gingival tissue and GCF samples were collected from sites of periodontitis in 10 healthy subjects and in 10 type 2 diabetic patients, and from the sites of healthy gingiva within the same groups. Therefore, each patient became his/her own control. Additionally, 10 people without any systemic or periodontal diseases were enrolled, forming a negative control group. Thus, a total of 50 tissue and 50 GCF samples were provided. RESULTS: No VEGF staining was observed in the negative control group or in the systemically healthy people's healthy tissue samples, whereas four samples of diabetic patients showed positive staining (P < 0.05). However, VEGF was revealed in two tissue samples of periodontal sites of systemically healthy people and in six samples of the diabetic patients (P > 0.05). In all test groups, GCF VEGF levels were higher in periodontal sites (P < 0.05) than in healthy sites. CONCLUSION: The results of this study showed that VEGF is increased in all periodontal tissues of both groups and in the healthy sites of diabetic patients. Additionally, GCF VEGF values increased in periodontal sites of all test groups.     

Effect of food preservatives on in situ biofilm formation

The aim of this double-blind, controlled crossover study was to evaluate the influence of food preservatives on in situ dental biofilm growth. Twenty-four volunteers wore appliances with six specimens each of bovine enamel to build up intra-oral biofilms. During three test cycles, the subjects had to put one half of the appliance twice a day in one of the assigned active solutions (0.1% benzoate, BA; 0.1% sorbate, SA or 0.2% chlorhexidine, CHX) and the other into NaCl. After 5 days, the developed biofilms were stained with two fluorescent dyes to visualise vital (green) and dead bacteria (red). Biofilms were scanned by confocal laser scanning microscopy and biofilm thickness (BT) and bacterial vitality (BV%) were calculated. After a washout period of 7 days, a new test cycle was started. The use of SA, BA and CHX resulted in a significantly reduced BT and BV compared to NaCl (p < 0.001). Differences between SA and BA were not significant (p > 0.05) for both parameters, while CHX showed significantly lower values. Both preservatives showed antibacterial and plaque-inhibiting properties, but not to the extent of CHX. The biofilm model enabled the examination of undisturbed oral biofilm formation influenced by antibacterial components under clinical conditions.     

Mechanical aspects of a multidirectional, angular stable osteosynthesis system and comparison with four conventional systems.

BACKGROUND: Following open reduction, internal fixation of fractures of the mandible is predominantly achieved using plates and screws. Today, a multitude of osteosynthesis systems are available on the market. One therapy modality, primarily developed for orthopaedic surgery, is using angular stable osteosynthesis plate systems. The dominating principle of these is the bond between screw and plate following insertion. This principle of an "internal fixateur" results in a more stable fixation of the fragments associated with less compression of the bone surfaces. MATERIAL: A new multidirectional osteosynthesis system (TiFix=Smartlock, Hamburg - Germany) was modified to fit the maxillofacial region and compared with four other well established osteosynthesis systems developed by Mondial, Medicon, Synthes, Leibinger-Stryker, one of these (Unilock by Synthes) being also angular stable. The resistance to deformation in varying directions was investigated following fixation in four different materials. RESULTS: The TiFix system proved more resistant to deformation even when mounted with fewer screws than the non-angular stable systems. CONCLUSION: This system results in greater stability even when fewer screws are used. For the clinician this means smaller access incisions, less soft tissue trauma, better aesthetic results, decreased duration of operation and a reduction of costs.     

Hyrax application as a tooth-borne distractor for maxillary advancement

Distraction osteogenesis (DO) has become a mainstream surgical technique for patients with jaw deformities. The aim of this study was to report the use of internal DO in the treatment of maxillary hypoplasia in a patient with cleft lip and palate. The case illustrates a 17-year-old boy with class III malocclusion, maxillary deficiency, and cleft lip and palate. Because the patient was experiencing severe hypernasality, it was decided to treat him by DO. The treatment process began by mounting a hyrax in the upper jaw for lateral expansion. A second hyrax was mounted in a way to create anteroposterior expansion. One day after the second hyrax application, the patient underwent a modified Le Fort I osteotomy. He was instructed to turn the screws twice per day for 12 days. The treatment was continued by means of a conventional face mask for 2 months. After 16 months of active treatment, favorable correction of the skeletal problem was observed. The S-N-A angle increased by 5 degrees, and patient's hypernasality was comprehensively improved.     

Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials

OBJECTIVES: This study evaluates the fracture toughness and hardness of three pressable all-ceramic materials: IPS-Empress, Empress 2 and an experimental ceramic material. METHODS: Fifteen discs and 15 bars per material were prepared. Fracture toughness was measured with two different techniques: indentation fracture and indentation strength. During the indentation fracture tests the hardness of each material was also measured. Statistical significance among groups of population was studied using one-way Anova and Tukey's multiple comparison tests. RESULTS: Fracture toughness results using the indentation strength technique (with three-point bending and biaxial flexure tests) were: IPS-Empress (1.39 (SD 0.3) and 1.32 (SD 0.3)); Empress 2 (3.14 (SD 0.5) and 2.50 (SD 0.3)) MPa x m(1/2); and the experimental ceramic (3.32 (SD 0.6) and 2.43 (SD 0.3)) MPa x m(1/2). The indentation fracture technique generated orthogonal cracks of different lengths for Empress 2 and the experimental ceramic, whether perpendicular or parallel to the lithium disilicate elongated crystals. Thus, two values were reported: Empress 2 (1.5 (SD 0.2) and 1.16 (SD 0.2)) MPa x am(1/2) and the experimental ceramic (1.67 (SD 0.3) and 1.15 (SD 0.15)) MPa x m(1/2). The IPS-Empress indentation fracture result was 1.26 (SD 0.1). The hardness results were: 6.6, 5.3 and 5.5 GPa for IPS-Empress, Empress 2 and the experimental ceramic, respectively. CONCLUSIONS: No significant differences in fracture toughness and hardness results were found between Empress 2 and the experimental ceramic (P>0.05 ANOVA). Both materials exhibited fracture toughness anisotropy following pressing. They demonstrated improved fracture toughness and reduced hardness compared with IPS-Empress P<0.05(ANOVA), which should be beneficial for clinical applications.     

Current status of predoctoral geriatric education in U.S. dental schools

The elderly constitute the fastest growing segment of the U.S. population. Dental schools must educate dental students so that they are competent and confident in managing the treatment needs of elderly patients. Programs in geriatric dentistry have been developed in response to the changing oral health needs of growing numbers of older adults. The purpose of this online survey was to identify the current status of predoctoral geriatric dental education in U.S. dental schools. A questionnaire relating to the teaching of geriatric dentistry was posted on the World Wide Web, and fifty-four US. dental schools were invited to complete the form. Data from completed questionnaires were submitted to the investigators via email. Following repeated phone calls and emails to urge school administrators to respond to the electronic questionnaire, a 100 percent response rate was achieved. All schools reported teaching at least some aspects of geriatric dentistry, and 98 percent had curricula that contain required didactic material. Sixty-seven percent of schools reported having a clinical component to geriatric dental teaching. Of these schools, the clinical content was required in 77 percent and elective in the rest. Thirty percent of schools reported a specific geriatric dentistry clinic within the school, and 11 percent had a remote clinical site. Sixty-three percent of schools have a geriatric program director or a chairman of a geriatric section. Over a third of schools indicated that they plan to extend the teaching of geriatric dentistry in the future. Geriatric dental education has continued to expand over the last twenty years and has established itself in the U.S. predoctoral dental curriculum. The format of teaching the subject varies considerably among the dental schools. Although didactic teaching of geriatric dentistry has increased markedly in the last two decades, clinical experience, both intramurally and extramurally, did not keep pace.     

Effects of interferon-gamma on bone remodeling during experimental tooth movement

OBJECTIVE: To determine the effects of interferon-gamma (IFN-gamma) on bone remodeling during orthodontic tooth movement. MATERIALS AND METHODS: Thirty adult male Sprague Dawley rats were randomly categorized into five groups. IFN-gamma was administered in three different doses (0.01, 0.02, and 0.05 microg/20 microL) and the remaining two groups served as control. Mandibular first molars were moved mesially by means of Ni-Ti closed coil springs in all groups. The results were evaluated histomorphometrically, and parameters of trabecular bone volume (BV/TV), trabecular bone number (Tr.N), and trabecular separation (Tr.Sep) were observed at the interradicular bone area of the mandibular first molars. RESULTS: Increases in BV/TV and Tr.N and decreases in Tr.Sep revealed the antiosteoclastic activity of IFN-gamma. CONCLUSION: IFN-gamma administration may be useful clinically for anchorage control.