Effects of Wax Molecular Weight Distribution and Branching on Moisture Sensitivity of Asphalt Binders

Wax is an important factor that affects the durability of asphalt binder. In order to understand the molecular weight distribution and branching of wax on the moisture sensitivity of asphalt binder, pure wax-doped asphalt binders are prepared and the performance of model asphalt binders are evaluated by surface free-energy (SFE) and binder bond strength (BBS) tests. In addition, asphaltene is regarded as an additive in this study. The results show that the addition of eicosane, triacontane, squalane and asphaltene can reduce the moisture sensitivity of asphalt, but not necessarily improve its moisture-induced damage resistance. The physical hardening effect of high-wax asphalt and its model asphalt is stronger than that of the corresponding low-wax asphalt and its model asphalt, and its moisture sensitivity is weaker than that of the low-wax asphalt. For all the model asphalts, there is a good correlation between the cohesion work, cohesion POTS (pull-off tensile strength), POTS ratio (the BBS moisture sensitivity index) and ER (the SFE moisture sensitivity index). When using the BBS test to characterize the moisture sensitivity of high-wax asphalt, it is recommended to leave the sample for some time until it is physically hardened and stable.     

Mixed germ cell tumor of the pineal gland in a pediatric patient

Tumors of the pineal region are a rare clinical entity, comprising approximately 3%-8% of pediatric tumors. Based on their histopathological features, they are typically classified as pineal parenchymal tumors and germ cell tumors, with the latter being more prevalent. Clinical presentation is heterogeneous, with symptoms arising either due to tumor invasion or compression of adjacent neurovascular structures and increased intracranial pressure. Imaging studies are paramount in evaluating pineal region lesions and establishing an accurate diagnosis, with MRI representing the gold standard. Herein, we present the case of a 16-year-old boy presented with recurrent headaches. A head MRI revealed a pineal gland lesion. Histopathological examination confirmed the diagnosis, and the patient underwent a successful gross total resection (GTR) of the tumor. This case report seeks to draw attention to the elusive clinical presentation and management of this infrequently encountered tumor, as well as emphasize the importance of considering pineal gland tumors in the differential diagnosis of recurrent, chronic headaches in pediatric patients.     

Enhanced healing efficacy of an optimized gabapentin-melittin nanoconjugate gel-loaded formulation in excised wounds of diabetic rats

The present study aimed to design and optimize, a nanoconjugate of gabapentin (GPN)-melittin (MLT) and to evaluate its healing activity in rat diabetic wounds. To explore the wound healing potency of GPN-MLT nanoconjugate, an in vivo study was carried out. Diabetic rats were subjected to excision wounds and received daily topical treatment with conventional formulations of GPN, MLT, GPN-MLT nanoconjugate and a marketed formula. The outcome of the in vivo study showed an expedited wound contraction in GPN-MLT-treated animals. This was confirmed histologically. The nanoconjugate formula exhibited antioxidant activities as evidenced by preventing malondialdehyde (MDA) accumulation and superoxide dismutase (SOD) and glutathione peroxidase (GPx) enzymatic exhaustion. Further, the nanoconjugate showed superior anti-inflammatory activity as it inhibited the expression of interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α). This is in addition to enhancement of proliferation as indicated by increased expression of transforming growth factor-β (TGF- β), vascular endothelial growth factor-A (VEGF-A) and platelet-derived growth factor receptor-β (PDGFRB). Also, nanoconjugate enhanced hydroxyproline concentration and mRNA expression of collagen type 1 alpha 1 (Col 1A1). In conclusion, a GPN-MLT nanoconjugate was optimized with respect to particle size. Analysis of pharmacokinetic attributes showed the mean particle size of optimized nanoconjugate as 156.9 nm. The nanoconjugate exhibited potent wound healing activities in diabetic rats. This, at least partly, involve enhanced antioxidant, anti-inflammatory, proliferative and pro-collagen activities. This may help to develop novel formulae that could accelerate wound healing in diabetes.     

Design optimization and efficiency enhancement of axial junction nanowire solar cells utilizing a forward scattering mechanism

We report the design, optimization, and performance analysis of three axial junction nanowire solar cells (NW SCs) based on cadmium telluride (CdTe), copper indium gallium selenide (CIGS), and copper zinc tin sulfide (CZTS) with significant improvement in their optical and electrical characteristics compared to their planar counterparts. It is shown that the performance of these NW SCs can be further improved by incorporating a hemispherical indium doped tin oxide (ITO) forward scatterer on top of the ITO front contact of the solar cells. We also compare forward scatterer incorporated NW SCs with forward scatterer incorporated planar solar cells (PSCs) and observe that forward scatterers significantly enhance the absorption in both cases. We further study the optimum size and arrangement of ITO hemispheres that result in improved photocurrent. In optimum cases, the incorporation of forward scatterers leads to absorption enhancement of 7.8%, 5.36%, and 8.8% in PSCs, and 21.4%, 7.36%, and 6.02% in NW SCs, respectively, for CdTe, CIGS, and CZTS absorbers in the same order. From the absorption profile at various wavelengths, it is found that forward scatterers enhance absorption in the 450–600 nm wavelength range, while nanowires improve absorption in the 600–800 nm range, and their combination results in an improved absorption profile for the entire visible wavelength range. We also observe increased electron–hole-pair (EHP) generation rate due to increased field-scattering and light concentration at the center of the nanowire below forward scattering hemispheres, leading to 46%, 32%, and 82.5% improvement in power conversion efficiency (PCE) for the three absorber layers, respectively. The effects of Al₂O₃ and SiO₂ passivation layers surrounding the nanowires of the optimized cells are observed, and we conclude that the CIGS absorber benefits the most when the SiO₂ passivation layer is used, increasing its PCE from 29.72% to 32.43%, while the PCEs of CdTe and CZTS are unaffected by the passivation layer due to competing effects of reduced absorption and reduced surface recombination.

We report the design and performance analysis of forward scatterer incorporated axial junction nanowire solar cells based on CdTe, CIGS, and CZTS with significant improvement in their optoelectronic properties compared to their planar counterparts.     

Performance of Microchannel Heat Sink Made of Silicon Material with the Two-Sided Wedge

New designs of the microchannel with a two-sided wedge shape at the base were studied numerically. Five different wedge angles ranging from 3° to 15° were incorporated into the microchannel design. Simulation of this novel microchannel was carried out using Computational Fluid Dynamics (CFD). Three-dimensional models of the microchannel heat sink were created, discretized, and based on Navier–Stokes and energy equations; laminar numerical solutions were obtained for heat transfer and pressure drop. Flow characteristics of water as coolant in a microchannel were studied. It was observed that numerical results are in good agreement with experimental results. It was found that the Nusselt number and friction factor are significantly varied with the increase in Reynolds number. The Nusselt number varies in the following ranges of 5.963–8.521, 5.986–8.550, 6.009–8.568, 6.040–8.609, and 6.078–8.644 at 3°, 6°, 9°, 12°, and 15°, respectively. The microchannel with a wedge angle of 15° was found to be better in terms of Nusselt number and thermo-hydraulic performance. The enhancement in the Nusselt number is found as 1.017–1.036 for a wedge angle of 15°; however, friction factors do not show the perceptible values at distinct values of wedge angle. Moreover, the thermo-hydraulic performance parameters (THPP) were evaluated and found to be maximum in the range of 1.027–1.045 for a wedge angle of 15°. However, minimum THPP was found in the range of 1.005–1.0185 for a wedge angle of 3°.     

Spectrum of Skin Lesions of Post-Kala-Azar Dermal Leishmaniasis in Kala-azar Endemic Areas of Bangladesh

Post-kala-azar dermal leishmaniasis (PKDL) is a complication of visceral leishmaniasis (VL) and serves as a potential reservoir for Leishmania parasite. The study was aimed to evaluate the spectrum of skin lesions of PKDL in kala-azar endemic areas in Bangladesh. This cross sectional study was carried out to observe the characteristics of skin lesions among 250 PKDL cases. The suspected PKDL patients in highly endemic villages of Fulbaria Upazilla of Mymensingh district.were subjected to a dipstick test (rK39) for kala azar. The median time interval between diagnosing kala-azar and PKDL was 23 month (m-21, r- 0-60 months). The most common skin lesions were multiple symmetrical hypopigmented macules with irregular margins in 179(71.6%) cases followed by erythematous facial induration in 74(29.6%), papular in 33(13.2%), nodular in 28(11.2%) cases, combination of macules, papules, nodules and plaques in 88(35.2%) cases, annular in 7(2.8%) cases and Papillomatous mucosal growth in 2(0.8%) cases. Sites of involvement were mostly in face (92.4%), Trunk (84.8%), extremities (33.2%), oral mucosa and tongue (0.8%) and Genitalia (1.2%). Suspicion of PKDL on the basis of skin lesions will lead to early diagnosis and prompt treatment will impart an important role in prevention and eradication of Leishmaniasis in Bangladesh.     

Evidence-Based Nutrition Interventions Improved Adolescents’ Knowledge and Behaviors in Indonesia

Adolescence is a nutritionally vulnerable and critical life stage. However, few programs and policies focus on improving adolescent nutrition in Indonesia. To address this gap, we implemented a gender-responsive package of interventions: (1) breakfast and weekly iron-folic acid supplementation (WIFS), (2) a school-based nutrition education program, and (3) a social behavior change communication strategy. We surveyed 514 adolescents at baseline (2019) and endline (2020) in Klaten and Lombok Barat districts in Indonesia. The survey included a knowledge assessment on nutrition, as well as indicators of attitudes and behaviors on diet, physical activity, and WIFS. We employed multivariable linear and logistic regression to test for pre–post intervention differences. Overall knowledge was significantly higher post-intervention (β: 3.3; 95% confidence interval [CI]: 2.6, 3.9). Diet diversity was high at both timepoints, however, at post-intervention there was significantly higher odds of consuming vitamin A-rich fruits and vegetables (Odds Ratio [OR]: 1.5; 95% CI: 1.1, 2.0) and lower odds of consuming sugar-sweetened beverages (OR: 0.4; 95% CI: 0.3, 0.5). Post-intervention, there was higher odds of reporting 60 min of daily physical activity (OR: 2.3; 95% CI: 1.7, 3.2) and WIFS among girls (OR: 6.7; 95% CI: 1.5, 30.9). The package of interventions may be a promising first step to improving adolescent nutrition in Indonesia.     

Design and Validation of Additively Manufactured Metallic Cellular Scaffold Structures for Bone Tissue Engineering

Bone-related defects that cannot heal without significant surgical intervention represent a significant challenge in the orthopedic field. The use of implants for these critical-sized bone defects is being explored to address the limitations of autograft and allograft options. Three-dimensional cellular structures, or bone scaffolds, provide mechanical support and promote bone tissue formation by acting as a template for bone growth. Stress shielding in bones is the reduction in bone density caused by the difference in stiffness between the scaffold and the surrounding bone tissue. This study aimed to reduce the stress shielding and introduce a cellular metal structure to replace defected bone by designing and producing a numerically optimized bone scaffold with an elastic modulus of 15 GPa, which matches the human’s cortical bone modulus. Cubic cell and diagonal cell designs were explored. Strut and cell dimensions were numerically optimized to achieve the desired structural modulus. The resulting scaffold designs were produced from stainless steel using laser powder bed fusion (LPBF). Finite element analysis (FEA) models were validated through compression testing of the printed scaffold designs. The structural configuration of the scaffolds was characterized with scanning electron microscopy (SEM). Cellular struts were found to have minimal internal porosity and rough surfaces. Strut dimensions of the printed scaffolds were found to have variations with the optimized computer-aided design (CAD) models. The experimental results, as expected, were slightly less than FEA results due to structural relative density variations in the scaffolds. Failure of the structures was stretch-dominated for the cubic scaffold and bending-dominated for the diagonal scaffold. The torsional and bending stiffnesses were numerically evaluated and showed higher bending and torsional moduli for the diagonal scaffold. The study successfully contributed to minimizing stress shielding in bone tissue engineering. The study also produced an innovative metal cellular structure that can replace large bone segments anywhere in the human body.