Effect of particle size of dried mycobacteria on adjuvant induced arthritis in the rat

Freund's complete adjuvant prepared by grinding dried, heat killedMycobacterium tuberculosis with liquid paraffin was investigated for particle size-weight distribution. Variations in the grinding times and preparative procedure had a marked effect on the arthritogenic action of the adjuvant in the rat. A satisfactory response in the injected foot was found only when the particle size was less than 19 m and a secondary response in the non-injected foot required particles less than 10 m in diameter.     

The prevalence and disability of bipolar spectrum disorders in the US population: re-analysis of the ECA database taking into account subthreshold cases

BACKGROUND: Despite emerging international consensus on the high prevalence of the bipolar spectrum in both clinical and community samples, many skeptics contend that narrowly defined bipolar disorder with a lifetime rate of about 1% represents a more accurate estimate of prevalence. This may in part be due to the fact that higher figures proposed for the bipolar spectrum (5-8%) have not been based on national data and have not included all levels of manic symptom severity. In the present secondary analyses of the US National Epidemiological Catchment Area (ECA) database, we provide further clarification on this fundamental public health issue. METHODS: All respondents in the first wave (first interview) of the ECA household five site sample (n=18252) were classified on the basis of DSM-III criteria into lifetime manic and hypomanic episodes, as well as those with at least two lifetime manic/hypomanic symptoms below the threshold for at least 1 week duration (subsyndromal manic symptoms [SSM] group). Odds ratios were calculated on lifetime service utilization for mental health problems, measures of adverse psychosocial outcome, and suicidal behavior compared to subjects with no mental disorders or manic symptoms. RESULTS: As originally reported nearly two decades ago by the primary investigators of the ECA, the lifetime prevalence for manic episode was 0.8%, and for hypomania, 0.5%. What is new here is the inclusion of subthreshold SSM subjects, which accounted for 5.1%, yielding a total of 6.4% lifetime prevalence for the bipolar spectrum. All three (manic, hypomanic and SSM) groups had greater marital disruption. There were significant increases in lifetime health service utilization, need for welfare and disability benefits and suicidal behavior when the SSM, hypomanic and manic subjects were compared to the no mental disorder group. Suicidal behavior was non-significantly highest in the hypomanic (bipolar II) group. Otherwise, hypomanic and manic groups had comparable level of service utilization and social disruption. LIMITATIONS: Comorbid disorders, which might influence functioning, were not included in the present analyses. CONCLUSION: These secondary analyses of the US National ECA database provide convincing evidence for the high prevalence of a spectrum of bipolarity in the community at 6.4%, and indicate that subthreshold cases are at least five times more prevalent than DSM-based core syndromal diagnoses at about 1%. These SSM subjects, who met the criteria of "caseness" from the point of view of harmful dysfunction, are of great theoretical and public health significance.     

The role of fluid hydrostatic pressure in bone-implant interface load transfer

Permeability of the soft tissue-bone system surrounding artificial joints fixed in cancellous bone was measured in four adult dogs after implants had been in place 2 months. Fluid was forced through a cavity formed by removal of the implant, the cavity was capped with a stopper to allow for pressure generation. Surface permeability of the 2-month-old implant cavity was 45 times less than the permeability of freshly drilled holes in cancellous bone. A mathematical model of a rigid implant resting on a biphasic solid-fluid layer showed the fluid carried 90% of the load when the implant cavity permeability was assumed, but only 27% when the freshly drilled permeability was used. The results suggest caution in interpreting finite-element models with bonded interfaces and suggest a possible role of the fluid in biological response at the interface.     

Antibody Responses to Group A Streptococcal Infections in the Hamster

The immune response after streptococcal infections of the skin and of the joints was studied in an experimental animal model. Hamsters were challenged intradermally or intra-articularly with different streptococcal serotypes, and antibodies for streptolysin O (ASO), deoxyribonuclease B (anti-deoxyribonuclease B), and group A carbohydrate (anti-group A CHO) were determined. After a single injection at either site, 7 of 48 animals (14%) developed group A-CHO antibodies; however, none of the animals developed detectable levels of ASO or anti-deoxyribonuclease B. After repeated infections of the skin or joint, anti-deoxyribonuclease B antibodies were detectable in 13% (4 of 30) and 30% (5 of 17) of the animals, respectively. Elevations of ASO occurred after repeated joint infections in 4 of 16 animals (25%), whereas none of 30 hamsters repeatedly infected intradermally developed antibodies against streptolysin O. For all three antibodies tested, elevated levels were more frequently noted after repeated joint infections than after repeated skin infections with the same streptococcal serotype. These data, similar to ones previously noted in human impetigo, indicate that ASO responses are feeble after streptococcal skin infections and that the site of infection per se, rather than the infecting strain, appears to be responsible for this poor response.     

Influence of Agonist, Shear Rate, and Perfusion Time on Nitric Oxide Inhibition of Platelet Deposition

Nitric oxide (NO) is a physiological species involved in inhibition of platelet adhesion and aggregation. A novel NO delivery device was utilized to quantitatively assess the effects of gaseous NO on platelet deposition to agonist-coated biomaterials in the presence of a platelet suspension. Platelet deposition was evaluated as a function of agonist (collagen, fibrinogen, or IgG), shear rate (250, 500, and 750 s^–1), and perfusion time (5, 7.5, and 15 min). The minimal aqueous surface NO concentrations and fluxes necessary for significant inhibition of platelet deposition were quantified. Platelet deposition was completely inhibited at a gaseous NO exposure of 0.1 ppm, irrespective of the platelet agonist, shear rate, and perfusion time. The corresponding aqueous surface NO concentration was 0.09 nM at 250 s^–1 as predicted by a validated model. Surface fluxes ranged between 0.3 and 0.6 femtomoles cm^–2 s^–1. The results of this study are useful for establishing generalized guidelines (i.e., NO flux requirements in the presence of agonists, shear rate, and perfusion time) for the design and development of suitable biomaterials incorporating NO to reduce platelet deposition. Further studies incorporating blood, rather than platelet suspensions, are required to provide a more complete assessment of the required NO flux necessary to inhibit platelet deposition. © 2000 Biomedical Engineering Society. PAC00: 8717-d, 8719Tt     

Influence of lamella features of UHMWPE on its physical and uniaxial tensile properties. I. Effect of sterilization method in uncrosslinked and unaged materials

The changes in the tensile toughness (U), degree of crystallinity (%C), melting temperature (Tm), lamella thickness, and lamella alignment of uncrosslinked and unaged GUR 1150HP ultra-high-molecular-weight polyethylene specimens, following different sterilization treatments (none, gamma-irradiation in air, gamma-irradiation in a nitrogen-rich atmosphere, ethylene oxide gas, and gas plasma) were determined. For each of the properties - U, %C, and Tm - the only significant difference in the mean value was found between the set of specimens gamma-irradiated in air, on the one hand, and each of the other sets, on the other hand. It was found that lamella thickness showed little change between the groups of specimens but there was a significant difference in the lamella orientation between the set of specimens that had been gamma-irradiated in air, on the one hand, and each of the other sets, on the other. It thus appears that the changes seen in the physical and mechanical properties determined may be a reflection of the change in the polymer's lamella alignment.     

Temporal variability of Cryptosporidium in the Chesapeake Bay

Although Cryptosporidium has been found worldwide in molluscan shellfish from waters contaminated with human and animal feces, little or no related environmental data have been obtained. In the present study, oysters ( Crassostrea virginica) were collected eight times over 3 years from seven sites in the Chesapeake Bay or its tributaries, with accompanying data on water temperature, salinity, rainfall, and streamflow. Oyster gill washings were examined by immunofluorescence microscopy for Cryptosporidium oocysts. Of 1,590 oysters collected, 19.6% had detectable oocysts. Of 53 collections, oocysts were detected 81% of the time. The time when the greatest percentage of oysters at most sites had detectable oocysts coincided with the time of greatest weekly and monthly rainfall, greatest streamflow into the Bay, and lowest water temperatures. In 28% of 53 collections, C. parvum genotypes 1 and 2 and C. baileyi were identified by PCR and gene sequencing. Oocyst infectivity was confirmed from 37.5% of 40 collections by initiating C. parvum genotype 2 infections in mice.