Bitumen Binders Modified with Sulfur/Organic Copolymers

With the continuing growth of waste sulfur production from the petroleum industry processes, its utilization for the production of useful, low-cost, and environmentally beneficial materials is of primary interest. Elemental sulfur has a significant and established history in the modification of bitumen binders, while the sulfur-containing high-molecular compounds are limited in this field. Herein, we report a novel possibility to utilize the sulfur/organic copolymers obtained via the inverse vulcanization process as modifiers for bitumen binders. Synthesis and thermal characterization (TGA-DSC) of polysulfides derived from elemental sulfur (S₈) and unsaturated organic species (dicyclopentadiene, styrene, and limonene) have been carried out. The performance of modified bitumen binders has been studied by several mechanical measurements (softening point, ductility, penetration at 25 °C, frass breaking point, adhesion to glass and gravel) and compared to the unmodified bitumen from the perspective of normalized requirements concerning polymer-modified bitumen. The interaction of bitumen binder with sulfur/organic modifier has been studied by means of FTIR spectroscopy and DSC measurements. The impact of the modification on the performance properties of bitumen has been demonstrated. The bitumen binders modified with sulfur/organic copolymers are in general less sensitive to higher temperatures (higher softening point up to 7 °C), more resistant to permanent deformations (lower penetration depth), and more resistant to aging processes without intrusive deterioration of parameters at lower temperatures. What is more, the modification resulted in significantly higher adhesion of bitumen binders to both glass (from 25% up to 87%) and gravel surfaces in combination with a lower tendency to form permanent deformations (more elastic behavior of the modified materials).     

Modified Histopathological Protocol for Poly-ɛ-Caprolactone Scaffolds Preserving Their Trabecular,Honeycomb-like Structure

Poly-ɛ-caprolactone (PCL) is now widely studied in relation to the engineering of bone, cartilage, tendons, and other tissues. Standard histological protocols can destroy the carefully created trabecular and honeycomb-like architecture of PCL scaffolds, and could lead to scaffold fibers swelling, resulting in the displacement or compression of tissues inside the scaffold. The aim of this study was to modify a standard histopathological protocol for PCL scaffold preparation and evaluate it on porous cylindrical PCL scaffolds in a rat model. In 16 inbred Wag rats, 2 PCL scaffolds were implanted subcutaneously to both inguinal areas. Two months after implantation, harvested scaffolds were first subjected to μCT imaging, and then to histopathological analysis with standard (left inguinal area) and modified histopathological protocols (right inguinal area). To standardize the results, soft tissue percentages (STPs) were calculated on scaffold cross-sections obtained from both histopathological protocols and compared with corresponding µCT cross-sections. The modified protocol enabled the assessment of almost 10× more soft tissues on the scaffold cross-section than the standard procedure. Moreover, STP was only 1.5% lower than in the corresponding µCT cross-sections assessed before the histopathological procedure. The presented modification of the histopathological protocol is cheap, reproducible, and allows for a comprehensive evaluation of PCL scaffolds while maintaining their trabecular, honeycomb-like structure on cross-sections.     

Evaluation of Permulgin 3274 as a Material for the Conservation of Beeswax Seals

When treating historical beeswax seals, it seems a natural choice to use materials as similar to the original as possible. The properties of analogous recent materials, however, differ from those of the aged ones, not to mention the fact that the exact composition of the particular sealing wax is usually uncertain. In order to obtain the material of desired properties, recent beeswax is often combined with various additives, including petroleum waxes, or even replaced by mixtures based solely on these products. Within this study, the relevant properties of Permulgin 3274, a ceresin-type wax, were compared with the characteristics of recent and historical beeswaxes. The aim was to evaluate its advantages and limitations, in terms of its possible use for the conservation of beeswax seals. The properties studied were comprised of the chemical composition, thermal properties, mechanical properties, possibilities of colour adjustment and ageing properties. Permulgin 3274′s workability was evaluated by conservators from the National Archives in Prague. The results indicate that, from the technological point of view, Permulgin 3274 could be considered a welcome alternative to the use of traditional conservation mixtures.     

Complications rate and pregnancy outcome in women who underwent early and mid trimester amniocentesis

OBJECTIVES: Evaluation of the complications rate, as well as pregnancy outcome, in women who underwent early and mid-trimester amniocentesis. MATERIAL AND METHODS: The study was conducted among 454 patients, including 162 women after the procedure performed before 15 gestational week and 292 patients who underwent classic amniocentesis. All patients were hospitalized in Division of Reproduction of University of Medical Sciences in Poznan between 1999 and 2005. The analysis, based both on clinical observations and questionnaire sent to patients, concerned especially the frequency of following complications: miscarriage, premature rupture of membranes and club foot in newborns. RESULTS: Total pregnancy loss rate due to amniocentesis amounted to 1.2% and 0.3% in early and mid-trimester amniocentesis, respectively, not reaching statistical significance. The frequency of club foot in newborns of mothers who underwent amniocentesis did not differ significantly between the groups, although it was four times higher in early amniocentesis group than in patients in whom mid-trimester amniocentesis had been performed. CONCLUSIONS: The safety of early amniocentesis is comparable with safety of mid-trimester amniocentesis.     

Physicochemical Properties of Biochar Produced from Goldenrod Plants

Torrefaction is one of the methods of thermal treatment of biomass, which allows obtaining a product of better quality in the form of biochar. The aim of the paper was to analyze the possibility of using goldenrod (Solidago canadensis, Solidago gigantea) for the production of biochar. The torrefaction process involved the vegetative and generative parts as well as the whole plant at temperatures of 250 °C and 275 °C, for 3 h. Next, the physicochemical properties of the raw material and biochar were determined, namely moisture content, ash content, volatile matter content, calorific value, and heat of combustion. The bulk density of raw biomass and biochar was also determined. It was found that after biomass torrefaction, the ash content, calorific value, and heat of combustion increased, while volatile matter content decreased. It has been observed that in both the case of raw biomass and biochar, the plant species and the sampled parts have a significant impact on the ash content, volatile matter content, calorific value, and heat of combustion.     

Co-Occurring CSF3R W791* Germline and Somatic T618I Driver Mutations Induce Early CNL and Clonal Progression to Mixed Phenotype Acute Leukemia

Chronic neutrophilic leukemia (CNL) relates to mutational CSF3R activation with membrane proximal CSF3R mutations such as T618I as driver mutations, but the significance of truncating mutations is not clarified. In CNL, concomitant mutations promote disease progression, but insight into longitudinal acquisition is incomplete. In this study, we investigated the role of co-occurring germline and somatic CSF3R mutations in CNL, and assessed the impact of clonal evolution on transformation to acute leukemia. We employed sequential next generation sequencing and SNP array karyotyping to assess clonal evolution in CNL of early manifestation age based on a 33-year-old patient. Germline vs. somatic mutations were differentiated using a sample from the hair follicle. To investigate a potential predisposition for CNL development and progression by germline CSF3R-W791*, allelic localizations were evaluated. We detected a somatic CSF3R-T618I mutation at 46% variant allele frequency (VAF) at the time of CNL diagnosis, which co-occurred with a CSF3R-W791* truncation at 50% VAF in the germline. Evaluation of allelic localization revealed CSF3R-T618I and W791* on the same allele. A concomitant ASXL1 mutation at 39% VAF increased to 48% VAF upon transformation to mixed phenotype acute leukemia (MPAL), which has both myeloid and lymphoid features. Clonal evolution further involved expansion of the CSF3R double-mutant clone to 90% VAF via copy neutral loss of heterozygosity on chromosome 1p and the emergence of a RUNX1 mutant subclone. Allogeneic transplantation induced complete remission. This study highlights that CNL not only transforms to AML but also to MPAL. The molecular evolution is especially interesting with a CSF3R-W791* mutation in the germline and acquisition of CSF3R-T618I on the same allele compatible with increased susceptibility for mutation acquisition facilitating RUNX1-related clonal transformation.