Association of acidosis with coagulopathy and transfusion requirements in liver transplantation

Journal of Thrombosis and Thrombolysis - The relationship between acidosis and coagulopathy has long been described in vitro and in trauma patients, but not yet in orthotopic liver transplantation...     

Helicobacter pylori Infection in Infants and Toddlers in South America: Concordance between [13C]Urea Breath Test and Monoclonal H. pylori Stool Antigen Test

Accurate noninvasive tests for diagnosing Helicobacter pylori infection in very young children are strongly required. We investigated the agreement between the [¹³C]urea breath test ([¹³C]UBT) and a monoclonal ELISA (HpSA) for detection of H. pylori antigen in stool. From October 2007 to July 2011, we enrolled 414 infants (123 from Brazil and 291 from Peru) of ages 6 to 30 months. Breath and stool samples were obtained at intervals of at least 3 months from Brazilian (n = 415) and Peruvian (n = 908) infants. [¹³C]UBT and stool test results concurred with each other in 1,255 (94.86%) cases (kappa coefficient = 0.90; 95% confidence interval [CI] = 0.87 to 0.92). In the H. pylori-positive group, delta-over-baseline (DOB) and optical density (OD) values were positively correlated (r = 0.62; P < 0.001). The positivity of the tests was higher (P < 0.001; odds ratio [OR] = 6.01; 95% CI = 4.50 to 8.04) in Peru (546/878; 62.2%) than in Brazil (81/377; 21.5%) and increased with increasing age in Brazil (P = 0.02), whereas in Peru it decreased with increasing age (P < 0.001). The disagreement between the test results was associated with birth in Brazil and female gender but not with age and diarrhea. Our results suggest that both [¹³C]UBT and the stool monoclonal test are reliable for diagnosing H. pylori infection in very young children, which will facilitate robust epidemiological studies in infants and toddlers.     

COVID-19 pandemic impacts physical activity levels and sedentary time but not sleep quality in young badminton athletes

Purpose

Regular physical activity is a good strategy to maintain the health of athletes, and prevent pain and decreased joint flexibility during the pandemic. On the other hand, higher sedentary time during the pandemic period can have deleterious effects. The objective of this study was to compare physical activity levels, sedentary time, and sleep parameters during the pre-COVID period and the COVID-19 pandemic period in young badminton athletes.

Methods

Fifteen young badminton athletes were evaluated during a pre-COVID period (July 2019) and during the COVID-19 period (July 2020). Sleep parameters, physical activity level, and sedentary time were measured using a tri-axial accelerometer. Participants wore the accelerometer on their dominant wrist for 7 days consecutively. In addition, the average of each sleep parameter [time in bed and total sleep time in hours per day, sleep efficiency (%), wake after sleep onset (WASO, total per day), and sleep latency (minutes per day)] was reported over the 7-day period.

Results

Athletes presented increased sedentary time (pre-COVID?=?7.0?±?1.1 vs.COVID-19?=?8.9?±?1.9 h/day, p?=?0.004, d?=?1.30) and significant decreases in the total PA observed in counts per day (pre-COVID?=?2,967,064.4?±?671,544.1 vs. COVID-19?=?1,868,210.2?±?449,768.4 counts/day, p?=?0.001, d?=?1.99), time in vigorous PA (pre-COVID?=?7.7?±?0.9 vs. COVID-19?=?6.1?±?1.2 h/day, p?=?0.001, d?=?1.56), and time in moderate-to-vigorous PA (pre-COVID?=?8.1?±?0.9 vs. COVID-19?=?6.5?±?1.3 h/day, p?=?0.001, d?=?1.48). There were no significant differences for time in light and moderate PA or in sleep parameters (p?>?0.05).

Conclusion

Young badminton athletes presented increased sedentary time, and decreased total physical activity, time in MVPA, and time in vigorous activities during the COVID-19 pandemic compared to the pre-COVID period, however, there were no significant differences in sleep parameters.

     

Titanium dioxide nanotubes with triazine-methacrylate monomer to improve physicochemical and biological properties of adhesives

ObjectiveFormulate experimental adhesives containing titanium dioxide nanotubes (nt-TiO₂) or titanium dioxide nanotubes with a triazine-methacrylate monomer (nt-TiO₂:TAT) and evaluate the effect of these fillers on the physical, chemical, and biological properties of the adhesives.MethodsFirst, nt-TiO₂ were synthesized via a hydrothermal method. The nt-TiO₂ were mixed with a triazine-methacrylate monomer (TAT) to formulate nt-TiO₂:TAT, which were characterized by transmission electron microscopy (TEM). The nt-TiO₂, TAT, and nt-TiO₂:TAT were evaluated via Fourier Transform Infrared, Ultraviolet–visible, and micro-Raman spectroscopies. An experimental adhesive resin was formulated with bisphenol A glycerolate dimethacrylates, 2-hydroxyethyl methacrylate, and photoinitiator/co-initiator system. nt-TiO₂ or nt-TiO₂:TAT were incorporated at 2.5 wt.% and 5 wt.% in the adhesive. The base resin without nt-TiO₂ or nt-TiO₂:TAT was used as a control group. The adhesives were evaluated for antibacterial activity, cytotoxicity, polymerization kinetics, degree of conversion (DC), Knoop hardness, softening in solvent (ΔKHN%), ultimate tensile strength (UTS), 24 h- and 1 year- microtensile bond strength (μ-TBS).ResultsTEM confirmed the nanotubular morphology of TiO₂. FTIR, UV–vis, and micro-Raman analyses showed the characteristic peaks of each material, indicating the impregnation of TAT in the nt-TiO₂. Adhesives with nt-TiO₂:TAT showed antimicrobial activity against biofilm formation compared to control (p < 0.05), without differences in the viability of planktonic bacteria (p > 0.05). All groups showed high percentages of pulp cell viability. The polymerization kinetics varied among groups, but all presented DC above 50%. The addition of 5 wt.% of nt-TiO₂ and both groups containing nt-TiO₂:TAT showed higher values ??of Knoop hardness compared to the control (p < 0.05). The groups with nt-TiO₂:TAT presented lower ΔKHN% (p < 0.05) and higher UTS (p < 0.05) than the control group. After one year, the group with 5 wt.% of nt-TiO₂, as well as both groups containing nt-TiO₂:TAT, showed higher μ-TBS than the control (p < 0.05).SignificanceThe mixing of a triazine-methacrylate monomer with the nt-TiO₂ generated a filler that improved the physicochemical properties of the adhesive resins and provided antibacterial activity, which could assist in preventing carious lesions around tooth-resin interfaces. The set of physical, chemical, and biological properties of the formulated polymer, together with the greater stability of the bond strength over time, make nt-TiO₂:TAT a promising filler for dental adhesive resins.     

Cytokine profile of patients with chronic immune thrombocytopenia affects platelet count recovery after Helicobacter pylori eradication

Helicobacter pylori eradication induces platelet recovery in a subgroup of patients with chronic immune thrombocytopenia (cITP), but the mechanisms involved are still not understood. We aimed to evaluate the effect of H. pylori eradication on platelet response and to identify the associated serum cytokine profile in 95 patients with cITP. Serum cytokine concentrations were determined by enzyme‐linked immunosorbent assay prior to and 6 months after H. pylori eradication. Remission of cITP was observed in 17 (28·8%) of 59 patients in whom the bacterium was eradicated. Six months after treatment, a significant reduction in the concentrations of T‐helper (Th) 1 and Th17 cells and an increase in T regulatory (Treg) and Th2‐cell commitment cytokines were observed in patients who recovered, but not in those whose platelet count did not recover. Patients who had a platelet response to eradication of the bacteria had higher pre‐treatment serum levels of γ‐interferon (IFNG, IFN‐γ), transforming growth factor‐β (TGFB1, TGF‐β) and interleukin 17 (IL17A, IL‐17) than patients who did not respond, but only higher pre‐treatment TGFB1 levels was independently associated with platelet response. In conclusion, amelioration of cITP after eradication of H. pylori was linked to a more efficient suppression of Th1 and Th17 response and a more pronounced Treg cell response.     

Addition of zinc methacrylate in dental polymers: MMP-2 inhibition and ultimate tensile strength evaluation

This study evaluated the effect of zinc methacrylate (ZM) on the inhibition of matrix metalloproteinase 2 (MMP-2) and the ultimate tensile strength (UTS) of an experimental polymer. Enzymes secreted from mouse gingival tissues were analyzed by gelatin zymography in buffers containing 5 mM CaCl₂ (Tris–CaCl₂) in 50 mM Tris–HCl buffer with various concentrations of ZM (0.5, 1, 2, 4, 8, and 16 mM). The matrix metalloproteinases present in the conditioned media were characterized by immunoprecipitation. The polymer UTS evaluation was performed in eight groups with various concentrations of ZM (0, 0.5, 1, 2.5, 5, 10, 20, and 30 wt.%), in a mechanical testing machine. MMP-2 (62 kDa) was detected in the zymographic assays and inhibited by ZM in all tested concentrations. UTS data were submitted to one-way ANOVA and Tukey's test (α = 0.05), and no significant differences were observed among groups, except in the polymer containing 30% ZM, presenting a significantly lower value when compared with the control group (p < 0.05). The results suggest that ZM inhibits MMP-2 expression in all concentrations tested, while small concentrations did not affect the ultimate tensile strength of the polymer. Zinc methacrylate is a metalloproteinase inhibitor that can be copolymerized with other methacrylate monomers. Yet, the addition of ZM did not affect the resin bond strength. Thus, in vivo tests should be performed to evaluate the performance of this material.     

Fracture strength of incisor crowns after intracoronal bleaching with sodium percarbonate

Abstract – Objectives: To compare the fracture resistance of bovine teeth after intracoronal bleaching with sodium percarbonate (SPC) or sodium perborate (SP) mixed with water or 20% hydrogen peroxide (HP). Materials and methods: Fifty extracted bovine teeth were divided into four experimental groups (G1–G4) and one control (n = 10) after endodontic treatment. Following root canal obturation, a glass ionomer barrier was placed at the cemento–enamel junction. After that, the pulp chambers were filled with: G1 – SP with water; G2 – SP with 20% HP; G3 – SPC with water; and G4 – SPC with 20% HP. No bleaching agent was used in the control group. Coronal access cavities were sealed with glass ionomer and specimens were immersed in artificial saliva. The bleaching agents were replaced after 7 days, and teeth were kept in artificial saliva for an additional 7 days, after which the pastes were removed and the coronal access cavities were restored with glass ionomer. Crowns were subjected to compressive load at a cross head speed of 0.5 mm min^?1 applied at 135° to the long axis of the root by an EMIC DL2000 testing machine, until coronal fracture. Data were statistically analysed by anova and Tukey test. Results: No differences in fracture resistance were observed between the experimental groups (P > 0.05). However, all experimental groups presented lower fracture resistance than the control group (P < 0.05). Conclusion: SPC and SP led to equal reduction on fracture resistance of dental crowns, regardless of being mixed with water or 20% HP.     

Eosinophilic ulcer of oral mucosa: a case report

Eosinophilic Ulcer (EU) is a rare self-limiting chronic benign lesion of the oral mucosa with pathogenesis still unclear, however it may resemble malignancies, traumatic ulcerations and some infections such as deep fungal infections, tuberculosis and primary syphilis. This is a case report of a patient with EU in the lateral border of the tongue with no history of associated trauma and refractory to treatment with drugs. The ulcer rapidly healed after an incisional biopsy and the definite diagnosis was achieved only combining histologic findings and the clinical follow-up.     

Effects of long-term water storage on the microtensile bond strength of five experimental self-etching adhesives based on surfactants rather than HEMA

Objectives

The purpose of this study is to evaluate the hypothesis that replacing 2-hydroxyethyl methacrylate (HEMA) for surfactant dimethacrylates (SD) does not affect the immediate and long-term microtensile bond strength (μTBS) of experimental two-step self-etch HEMA-free adhesive systems applied on dentin.

Materials and methods

Five experimental HEMA-free two-step self-etching systems containing different SD (ethoxylated bisphenol A diglycidyl dimethacrylate (Bis-EMA 10, B10), Bis-EMA 30 (B30), poly-ethyleneglycol (400) dimethacrylate (PEG 400, P400), PEG 1000 (P1000), and PEG 400 urethane dimethacrylate (UDMA) (UP400)) and a HEMA-containing system (control) (HA) were formulated. Specimens were subjected to the μTBS test after 24 h and 6 and 12 months of storage. Data (in megapascals) were analyzed by Kruskal–Wallis and Dunn tests (α?=?0.05).

Results

Medians of the μTBS data after 24 h of storage are: HA?=?57.2^A, B10?=?26.2^BC, B30?=?24.0^C, P400?=?32.6^BC, P1000?=?37.3^B, and UP400?=?57.9^A; after 6 months are: HA?=?47.9^A, B10?=?18.5^B, B30?=?7.8^C, P400?=?16.1^B, P1000?=?14.6^BC, and UP400?=?51.6^A; and after 12 months are: HA?=?31.2^A, B10?=?15.2^B, B30?=?9.0^B, P400?=?9.1^B, P1000?=?13.3^B, and UP400?=?35.7^A. Between the HEMA-free groups, the adhesive system formulated with PEG 400 UDMA produced similar μTBS to the HEMA-containing group. Also, the storage of specimens decreased the μTBS (p?<?0.05).

Conclusion

Replacing HEMA for PEG 400 UDMA in an adhesive system formulation generated a satisfactory μTBS to dentin.

Clinical relevance

Surfactant dimethacrylates have a potential use in the development of HEMA-free self-etching adhesive systems, which are more chemically stable.