恒定分压CO2对羟基磷灰石溶解度的影响

[目的]应用固体滴定技术监测羟基磷灰石(Hydroxyaptite,HA)的溶解平衡过程,观察组织液生理浓度CO2对羟基磷灰石溶解度的影响.[方法]在恒温水浴系统中以HA为固体滴定物.测试液为KCl溶液(0.1 mol/L),并引入恒定分压的CO2(占空气体积比为3.5%±0.1%).半导体二极管激光为发射光源,散射光源探测器用于监测HA的溶解平衡过程并判断超越溶解平衡点所出现的沉淀(合共17次滴定终点).固体滴定总量用于代表溶解度等温线上的数据点.[结果]引入恒定分压CO2后测定的HA在KCl溶液中的溶解度高于其在KCl溶液中所得50倍以上.[结论]固体滴定技术利于监测HA的溶解平衡过程.溶液体系中CO2增加HA的溶解度.推测该现象与CO2-3形成的复合物密切相关.     

Noninvasive tests for arterial structure, function, and compliance: do they identify risk or diagnose disease?

BACKGROUND: Brachial artery reactivity (BAR), carotid intima-media thickness (IMT), and applanation tonometry for evaluation of total arterial compliance may provide information about preclinical vascular disease. We sought to determine whether these tests could be used to identify patients with coronary artery disease (CAD) without being influenced by their ability to identify those at risk for CAD developing. METHODS: We studied 100 patients and compared 3 groups: 35 patients with known CAD; 34 patients with symptoms and risk factors but no CAD identified by stress echocardiography (risk group); and 31 control subjects. BAR and IMT were measured using standard methods, and total arterial compliance was calculated by the pulse-pressure method from simultaneous radial applanation tonometry and pulsed wave Doppler of the left ventricular outflow. Ischemia was identified as a new or worsening wall-motion abnormality induced by stress. RESULTS: In a comparison between the control subjects and patients either at risk for developing CAD or with CAD, the predictors of risk for CAD were: age (P =.01); smoking history (P =.002); hypercholesterolemia (P =.002); and hypertension (P =.004) (model R = 0.82; P =.0001). The independent predictors of CAD were: IMT (P =.001); BAR (P =.04); sex (P =.005); and hypertension (P =.005) (model R = 0.80; P =.0001). CONCLUSION: IMT, BAR, and traditional cardiovascular risk factors appear to identify patients at risk for CAD developing. However, only IMT was significantly different between patients at risk for developing CAD and those with overt CAD.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Understanding the minimum clinically important difference: a review of concepts and methods.

BACKGROUND CONTEXT: The effectiveness of spinal surgery as a treatment option is currently evaluated through the assessment of patient-reported outcomes (PROs). The minimum clinically important difference (MCID) represents the smallest improvement considered worthwhile by a patient. The concept of an MCID is offered as the new standard for determining effectiveness of a given treatment and describing patient satisfaction in reference to that treatment. PURPOSE: Our goal is to review the various definitions of MCID and the methods available to determine MCID. STUDY DESIGN: The primary means of determining the MCID for a specific treatment are divided into anchor-based and distribution-based methods. Each method is further subdivided and examined in detail. METHODS: The overall limitations of the MCID concept are first identified. The basic assumptions, statistical biases, and shortcomings of each method are examined in detail. RESULTS: Each method of determining the MCID has specific shortcomings. Three general limitations in the accurate determination of an MCID have been identified: the multiplicity of MCID determinations, the loss of the patient's perspective, and the relationship between pretreatment baseline and posttreatment change scores. CONCLUSIONS: An ideal means of determining the MCID for a given intervention is yet to be determined. It is possible to develop a useful method provided that the assumptions and methodology are initially declared. Our efforts toward the establishment of a MCID will rely on the establishment of specific external criteria based on the symptoms of the patient and treatment intervention being evaluated.     

Scalp electrical recording during paralysis: quantitative evidence that EEG frequencies above 20 Hz are contaminated by EMG.

OBJECTIVE: To identify the possible contribution of electromyogram (EMG) to scalp electroencephalogram (EEG) rhythms at rest and induced or evoked by cognitive tasks. METHODS: Scalp EEG recordings were made on two subjects in presence and absence of complete neuromuscular blockade, sparing the dominant arm. The subjects undertook cognitive tasks in both states to allow direct comparison of electrical recordings. RESULTS: EEG rhythms in the paralysed state differed significantly compared with the unparalysed state, with 10- to 200-fold differences in the power of frequencies above 20 Hz during paralysis. CONCLUSIONS: Most of the scalp EEG recording above 20 Hz is of EMG origin. Previous studies measuring gamma EEG need to be re-evaluated. SIGNIFICANCE: This has a significant impact on measurements of gamma rhythms from the scalp EEG in unparalysed humans. It is to be hoped that signal separation methods will be able to rectify this situation.     

Biochemical analysis of human milk treated with sodium dodecyl sulfate, an alkyl sulfate microbicide that inactivates human immunodeficiency virus type 1.

Reduction of transmission of human immunodeficiency virus type 1 (HIV-1) through human milk is needed. Alkyl sulfates such as sodium dodecyl sulfate (SDS) are microbicidal against HIV-1 at low concentrations, have little to no toxicity, and are inexpensive. The authors have reported that treatment of HIV-1-infected human milk with < or = 1% (10 mg/mL) SDS for 10 minutes inactivates cell-free and cell-associated virus. The SDS can be removed with a commercially available resin after treatment without recovery of viral infectivity. In this article, the authors report results of selective biochemical analyses (ie, protein, immunoglobulins, lipids, cells, and electrolytes) of human milk subjected to SDS treatment and removal. The SDS treatment or removal had no significant effects on the milk components studied. Therefore, the use of alkyl sulfate microbicides to treat milk from HIV-1-positive women may be a simple, practical, and nutritionally sound way to prevent or reduce transmission of HIV-1 while still feeding with mother's own milk.     

A stochastic model for determining the necessary staff level in a service industry

Determining sufficient staff levels and providing quality, economical and efficient service is a problem that is difficult for some staffing managers to solve. The objectives in this paper are to derive a stochastic model for determining the necessary staff levels in various service environments such as hospitals, banks, or in manufacturing settings where the demand for a good staff is erratic. In order to assess the proper staff levels, an equation must be used which involves previous service demand hours that are considered as a distribution integrated within the statistical capability scale distribution. The most important property of this staffing model is that the results are independent of the mix of the jobs, the variation of the in-service time for jobs, and the stationary or nonstationary job arrival rate.