Dental attrition and associated factors in adolescents 14 to 19 years of age: a pilot study

PURPOSE: This cross-sectional study evaluated the relationship between attrition and diverse variables in 390 Mexican adolescents aged 14 to 19 years. MATERIALS AND METHODS: An ordinal scoring system was used to describe the severity of attrition. RESULTS: Attrition prevalence was 33.3% and was associated with older age, presence of defective restorations, Class II malocclusion, and perception of stress level. CONCLUSION: Our results suggest that attrition is present in 1 of every 3 adolescents.     

Prevalence and distribution of developmental enamel defects in the primary dentition of pre-school children

Developmental defects of the enamel (D.D.E.) are changes in the deciduous dentition that have been little studied in Brazil, although they lead to aesthetic problems, dental sensitivity and may be predictors of dental caries. The objective of this study was to estimate the prevalence and distribution of D.D.E. in the deciduous dentition of pre-school children in the municipality of Itajaí, Santa Catarina, in 2003. A cross-sectional study was carried out with a sample of 431 children aged 3 to 5 enrolled in public day care centres. All of the teeth were examined and the enamel defects were assessed according to the Modified DDE Index (FDI, 1992). The prevalence of D.D.E. was 24.4% (CI 95% 20.3-28.5). Diffuse opacities were the most common defects found (17.9%), followed by hypoplasia (11.1%) and demarcated opacities (6.1%). The most affected teeth were the second molars (44.4%), followed by the first molars (23.5%). Defects were observed more frequently in the upper arch (58.2%). Assessing enamel hypoplasia separately, a prevalence of 15.1% (CI 95% 11.7-18.5) was observed, with the most affected teeth being the canines (33.6%) and second molars (33.6%). One quarter of the pre-school children presented enamel defects, with diffuse opacities being the most prevalent ones.     

Giant pleomorphic adenoma of the submandibular gland. Case report

Salivary glands are sites for a great variety of tumors. The parotid gland is the most common site followed by the submandibular gland. The pleomorphic adenoma represents the 60-70% of all tumors involving the major salivary glands, while the submandibular gland is involved in 8% of cases. The pleomorphic adenoma of the submandibular gland is rare and can present difficulty in diagnosis. The heterogeneous histology, a possible malignant transformation, an incomplete capsule that can determine a recurrence, are the most important characteristics of pleomorphic adenoma. A complete surgical removal of the tumor is the treatment of choice. In the case presented, the mass showed an unusual vascularization and remarkable dimensions.     

Pain and instability during biting with mandibular implant-retained overdentures

We tested in a randomized controlled clinical trial the effect of pain and instability of dentures on bite force with different degrees of mucosal support. The trial involved 3 groups who had received: 1) a new conventional denture (CD-group), 2) an implant-mucosa-borne overdenture on 2 IMZ implants (IMZ-group) or 3) a mainly implant-borne overdenture retained by a transmandibular implant (TMI-group). Fifty-three women and 15 men, mean age 59 years, participated in this study. Bite force measurements were made unilaterally with a transducer and bilaterally with a bite fork. After the measurements, subjects were asked whether or not biting had caused pain or tilting of one of the dentures. Significantly more complete-denture wearers reported pain. They reported more frequent pain in the mandible than in the maxilla (P < 0.001), whereas implant-groups seemed to experience more often pain in the maxilla. On the transducer, maxillary dentures of the CD-group tilted less (P < 0.01) and mandibular dentures more (P < 0.05) compared to the implant-groups. With the bite fork, tilting occurred more often in the incisal-cuspid area than in the molar region (P < 0.001). No effect of pain and tilting was observed on maximum bite force. It appears that oral implants used to stabilize mandibular dentures permit subjects to exert higher bite forces and reduce the pain as otherwise felt in the mandible during maximum biting. Due to this stabilization, pain and instability of the maxillary denture can become the limiting factor for a further increase in bite force.     

Evaluation of regional bond strength of resin cement to endodontic surfaces

The purpose of this study was to test the feasibility of adapting a new microtensile testing technique to measure resin cement bond strengths to the cervical, middle, and apical thirds of root canals. Post spaces were created in extracted human teeth, and the roots were ground flat on one side to expose the canal and permit ideal placement of one of two resin cements (Panavia 21 or C&B Metabond). After 48 h of storage, serial 1-mm-thick cross-sections were cut to create 6-10 specimens per root. The first three specimens were from the cervical third, the next three were from the middle third, and the last three were from the apical third of the root. Each 1 x 1 x 8 mm specimen was pulled to failure in a miniature testing machine. The results indicated that both resin cements produced high bond strengths (12-23 MPa), and that bond strengths to the apical third were significantly higher (p < 0.05) than to the cervical or middle third with either cement. This new method shows promise for evaluating resin bond strengths within root canals.     

A morphological and tensile bond strength evaluation of an unfilled adhesive with low-viscosity composites and a filled adhesive in one and two coats

OBJECTIVE: The purpose of this study was to measure the tensile bond strength (TBS) testing of resin composite to dentin of three low-viscosity composites, in association with an unfilled adhesive, and a filled adhesive one and two coats respectively, and to evaluate and compare the SEM morphological observations. METHODS: The labial surface of 120 bovine lower incisors were ground to obtain a flat dentin surface allowing demarcation of a 4 mm diameter area with adhesive tape. The teeth were randomly divided in six groups of 20 each. The dentin of each ground surface was etched with 35% H(3)PO(4) for 15s, followed by application of the respective adhesive: Single Bond (SB) for Groups 1, 2, 3 and 6; Optibond Solo (OS) for Groups 4 and 5. In Groups 1 and 4, a resin composite rod with a wire loop was luted directly to the adhesive surface with Z100. Group 2 received an intermediate layer of Flow It (FI) composite; Group 3 received an intermediate layer of Protect Liner F (PLF) composite; Group 5 received a second coat of OS; and Group 6 received an intermediate layer of an experimental low-viscosity composite (EM). A resin composite rod was luted to the surface of each specimen with Z100 resin composite. All specimens were stored in distilled water at 37 degrees C for 24h prior to TBS testing. Each specimen was inspected by SEM and classified according to adhesive or cohesive failure mode. One specimen of each group was cut longitudinally, polished and prepared for SEM observation. RESULTS: The TBS values were: Group 1 (7.86MPa+/-2.28), Group 2 (7.62MPa+/-1.85), Group 3 (7.60MPa+/-2.14), Group 4 (7.96MPa+/-2.36), Group 5 (7.50MPa+/-2.70) and Group 6 (7.18MPa+/-2.40). No significant statistical differences were observed among the groups. However, the analyses of the failure mode presented a considerable variation. SIGNIFICANCE: The use of a filled adhesive or an unfilled adhesive along with a low-viscosity composite as an intermediate layer may provide a stress absorbing layer, whereby improving the preservation of the bonded interface area.     

Dental resin composites containing ceramic whiskers and precured glass ionomer particles.

OBJECTIVES: Glass ionomer, resin-modified glass ionomer, and compomer materials are susceptible to brittle fracture and are inadequate for use in large stress-bearing posterior restorations. The aim of this study was to use ceramic single crystal whiskers to reinforce composites formulated with precured glass ionomer, and to examine the effects of whisker-to-precured glass ionomer mass ratio on mechanical properties, fluoride release, and polishability of the composites. METHODS: Silica particles were fused onto silicon nitride whiskers to facilitate silanization and to improve whisker retention in the matrix. Hardened glass ionomer was ground into a fine powder, mixed with whiskers, and used as fillers for a dental resin. Four control materials were also tested: a glass ionomer, a resin-modified glass ionomer, a compomer, and a hybrid composite. A three-point flexural test was used to measure flexural strength, modulus, and work-of-fracture. A fluoride ion-selective electrode was used to measure fluoride release. Composite surfaces polished simulating clinical procedures were examined by SEM and profilometry. RESULTS: At whisker/(whisker + precured glass ionomer) mass fractions of 1.0 and 0.91, the whisker composite had a flexural strength in MPa (mean (SD); n = 6) of (196 (10)) and (150 (16)), respectively, compared to (15 (7)) for glass ionomer, (39 (8)) for resin-modified glass ionomer, (89 (18)) for compomer, and (120 (16)) for hybrid composite. The whisker composite had a cumulative fluoride release of nearly 20% of that of the glass ionomer after 90 days. The whisker composites had surface roughness comparable to the hybrid resin composite. SIGNIFICANCE: Composites filled with precured glass ionomer particles and whiskers exhibit moderate fluoride release with improved mechanical properties; the whisker-to-glass ionomer ratio is a key microstructural parameter that controls fluoride release and mechanical properties.     

The systemic immune response is more prominent than the mucosal immune response in the pathogenesis of periodontal disease

BACKGROUND, AIM: The diseased periodontium appears to express features of a systemic and a mucosal immune response. Our aims were to determine differences in immunoglobulin expression between gingivitis and periodontitis lesions and to ascertain whether immune and inflammatory cells were recruited into the diseased periodontium by the mucosal addressin adhesion molecule (MAdCAM-1). METHODS: In situ hybridization and immunohistochemistry were used to detect the expression of chemokines, adhesion molecules and immunoglobulins in tissue sections of gingival and granulation tissues excised from periodontitis-affected sites and of healthy tissue and gingivitis-affected tissue excised during crown-lengthening procedures. RESULTS: Greater numbers of plasma cells were observed in periodontitis gingival/granulation tissue lesions compared with gingivitis lesions. While IgA1 were predominant in all lesions, IgA2 and J-chain expressing plasma cells were present in increased proportions in gingival tissues compared with granulation tissue. Intracellular adhesion molecule-1 (ICAM-1) was higher in periodontitis than in gingivitis and interleukin-8 mRNA was higher in lesions with a pronounced neutrophil infiltrate. Vascular cell adhesion molecule-1 (VCAM-1) localized to the deep connective tissue and indicated the presence of a systemic type of immune response in this region. Periodontal tissues (n=71 biopsies) did not appear to express MAdCAM-1, in positive control sections of small intestine where it was detected. CONCLUSION: Overall, the systemic-type immune response is predominant, and although the mucosal immune response is minor and limited to the superficial tissues it may have an important role in the host defense to periodontal pathogens.     

One-year clinical evaluation of tooth-colored materials in non-carious cervical lesions

The purpose of this study was to assess the clinical performance of bonded composite (Excite/Tetric Ceram - Vivadent) versus a resin-modified glass ionomer cement (Vitremer - 3M) for restoring non-carious cervical lesions. A total of 70 restorations (thirty-five per material) were placed in 30 patients, 18-50 aged, by one operator. Rubber dam was employed in all cases, lesions were pumiced, enamel margins were not beveled, and no mechanical retention was placed. The restorations were directly assessed by two independent evaluators using modified-USPHS criteria for six clinical categories. The ratings for clinical acceptability restorations (alfa plus bravo) were as follows (Tetric Ceram/Vitremer): retention (86%/100%), marginal integrity (100%/100%), marginal discoloration (100%/100%), wear (97%/100%), postoperative sensitivity (100%/100%) and recurrent caries (100%/100%). Statistical analysis was completed with Fisher's exact or Pearson Chi-square tests at a significance level of 5% (P<0.05). Results showed that almost all restorations were clinically satisfactory with no significant differences between materials groups. Five restorations of Excite/Tetric Ceram failed. No restorations of Vitremer have yet failed.     

Oral lichen planus: a clinical and morphometric study of oral lesions in relation to clinical presentation

Oral lichen planus (OLP) is a chronic inflammatory disease with different clinical presentations that can be classified as reticular or atrophic-erosive. Sixty-two OLP patients were studied to evaluate the clinical-pathologic characteristics of their OLP lesions and to investigate possible differences in their biological behavior. The most common clinical presentation was the reticular type (62.9% vs 37.1%). Atrophic-erosive presentations showed significantly longer evolution (chi square=4.454; p=0.049), more extensive lesions (chi square=16.211; p=0.000) and more sites affected than reticular ones (chi square=10.048; p=0.002). Atrophic-erosive OLP was more frequently found on the tongue, gingiva and floor of the mouth. No statistically significant differences could be identified between reticular and atrophic-erosive clinical presentations in terms of age, sex, tobacco habit, plasma cortisol level and depth of inflammatory infiltrate. We concluded that the classification of OLP lesions as reticular vs atrophic-erosive is a simple, easy to use classification that can identify clinical presentations with different biological behavior.