中药生产过程质量控制关键技术研究进展

中医药发展已上升到国家战略层面,在医药行业贯彻实施"中国制造2025"战略的新形势下,中药生产过程质量控制是中药工业需要加快突破的关键领域之一。对中药生产过程质量控制领域在工艺设计、分析检测、过程建模、制造装备等方面的关键共性问题进行解析,综述了中药生产过程质量控制体系中工艺过程理解、生产过程实时分析方法开发、过程控制策略建立3个方面的研究进展;并结合企业研究实践,介绍了质量源于设计(quality by design,Qb D)、过程分析技术(process analytical technology,PAT)、实验设计(design of experiment,DOE)、多变量统计分析等关键技术在上述3个研究方向中的应用进展,分析了实际工业应用的难点问题并对其应用前景进行展望,旨在为中药企业应用和提升生产过程质量控制技术提供参考。     

醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响

目的　探究醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响。方法　Wistar大鼠36只，随机分为对照组、模型组、转染组，后两组建立糖尿病大鼠模型。模型建立成功后，构建含有晚期糖基化终末产物受体siRNA的质粒并利用慢病毒转染入转染组大鼠体内。造模后4周、8周、12周，记录各组大鼠体质量及空腹血糖。造模后9周，禁食6 h，测定口服葡萄糖耐量。造模后12周，处死全部大鼠后，TUNEL法检测各组大鼠视网膜神经元凋亡情况，荧光分光光度计测定醛糖还原酶活性，Western blotting法测定晚期糖基化终末产物受体的表达，RT-PCR检测视网膜中Bcl-2和Bax mRNA相对表达量。结果　造模后4周、8周、12周，转染组和模型组的大鼠体质量均低于对照组（均为P<0.05）；造模后12周，转染组大鼠体质量高于模型组（P<0.05）。造模后4周、8周、12周，各组内大鼠空腹血糖水平均无明显变化（均为P>0.05），转染组和模型组大鼠的空腹血糖水平均高于对照组（均为P<0.05）。模型组和转染组大鼠在口服葡萄糖后30 min时，血糖水平均高于对照组（均为P<0.05）；在120 min时分别下降至最低，但仍高于对照组（均为P<0.05）。模型组和转染组的视网膜神经元凋亡指数、醛糖还原酶活性、晚期糖基化终末产物受体和Bax mRNA相对表达量均高于对照组（均为P<0.05），且转染组均高于模型组（均为P<0.05）。模型组和转染组的Bcl-2 mRNA相对表达量均低于对照组（均为P<0.05），转染组低于模型组（P<0.05）。结论　晚期糖基化终末产物结合受体后产生大量的氧自由基损伤，可能是导致糖尿病视网膜神经元凋亡，进而导致糖尿病视网膜病变发生的机制之一。     

N-三甲基壳聚糖对促进阿昔洛韦滴眼液眼部滞留性的体内外考察

目的对不同季铵化程度(DQ)的N-三甲基壳聚糖(TMC)促进阿昔洛韦(ACV)滴眼液眼部滞留性进行考察。方法将浓度为0.5%,DQ分别为20%、40%及60%的TMC(TMC20,TMC40,TMC60)加入ACV滴眼液中;以同浓度壳聚糖(CS)ACV滴眼液为阳性对照,以普通ACV滴眼液为阴性对照,选用家兔为实验动物,采用悬挂泡技术和束缚泡技术进行离体眼球表面接触角及解吸附动力学进行研究,同时在各种ACV滴眼液中分别加入0.05%的荧光素钠为示踪剂,在体研究各种ACV滴眼液在家兔眼部的滞留性。结果与普通ACV滴眼液相比,含CS及TMC的滴眼液在角膜表面的接触角明显降低,解吸时间及在体滞留时间明显延长(P<0.05);与同浓度的CS ACV阳性对照相比,TMC20促进滞留作用较弱,而TMC40作用差异无显著性(P>0.05),而TMC60的作用明显较强(P<0.05)结论 TMC可显著增加ACV的眼部滞留性,且与其DQ呈正相关。     

应用国产封堵器在治疗先天性心脏病的临床疗效分析

目的 总结国产封堵器经皮和经胸途径治疗先天性心脏病的临床疗效。方法 回顾性分析我院2013年1月至2017年12月在X线透视下或单纯超声心动图引导下采用经皮穿刺股静脉或股动静脉法，或者食管超声心动图监测下经胸小切口行先天性心脏病封堵1186例，其中经皮X线下封堵1081例、经皮单纯超声引导下封堵42例、经胸封堵63例；其中动脉导管未闭（ patent ductus arteriole，PDA）426例、房间隔缺损（atrial septal defect，ASD）363例、室间隔缺损（ventricular septal defect，VSD）348例、卵圆孔未闭11例、房间隔缺损合并室间隔缺损9例、房间隔缺损合并动脉导管未闭6例、房间隔缺损合并肺动脉瓣狭窄（pulmonary stenosis，PS）12例、动脉导管未闭合并肺动脉瓣狭窄8例、主肺动脉侧支封堵3例[经胸封堵66例改为63例，PDA443例改为426例]。结果 全组病例成功率98.2％（1165/1186），无死亡病例。随访1~36个月，术后第1、3、6、12个月及术后每年常规行超声心动图及心电图检查。术后第1、6、12个月的随访率分别为 92.9%（1102/1186）、84.1%（998/1186）、70.5%（836/1186）。超声心动图提示少量残余分流（<3 mm）18例；三尖瓣少量反流33例，中量反流5例；主动脉瓣轻度反流5例，中度反流1例；心律失常Ⅲ°房室传导阻滞（Avionics Bulletin，AVB[房室传导阻滞（Avionics Bulletin，AVB）]）1 例，Ⅱ°AVB 3例，完全性左束支3例，交界性心动过速3例，交界性逸搏2例。结论 国产封堵器在先天性心脏病封堵治疗中具有成功率高、创伤小、并发症低、操作容易、疗效确切、恢复快等特点，是治疗先天性心脏病的理想方法。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Myeloid-derived suppressor cell (MDSC) key genes analysis in rat anti-CD28-induced immune tolerance kidney transplantation

BackgroundIn the field of transplantation, inducing immune tolerance in recipients is of great importance. Blocking co-stimulatory molecule using anti-CD28 antibody could induce tolerance in a rat kidney transplantation model. Myeloid-derived suppressor cells (MDSCs) reveals strong immune suppressive abilities in kidney transplantation. Here we analyzed key genes of MDSCs leading to transplant tolerance in this model.MethodsMicroarray data of rat gene expression profiles under accession number {"type":"entrez-geo","attrs":{"text":"GSE28545","term_id":"28545"}}GSE28545 in the Gene Expression Omnibus (GEO) database were analyzed. Running the LIMMA package in R language, the differentially expressed genes (DEGs) were found. Enrichment analysis of the DEGs was conducted in the Database for Annotation, Visualization and Integrated Discovery (DAVID) database to explore gene ontology (GO) annotation and their Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Their protein-protein interactions (PPIs) were provided by STRING database and was visualized in Cytoscape. Hub genes were carried out by CytoHubba.ResultsThree hundred and thirty-eight DEGs were exported, including 27 upregulated and 311 downregulated genes. The functions and KEGG pathways of the DEGs were assessed and the PPI network was constructed based on the string interactions of the DEGs. The network was visualized in Cytoscape; the entire PPI network consisted of 192 nodes and 469 edges. Zap70, Cdc42, Stat1, Stat4, Ccl5 and Cxcr3 were among the hub genes.ConclusionsThese key genes, corresponding proteins and their functions may provide valuable background for both basic and clinical research and could be the direction of future studies in immune tolerance, especially those examining immunocyte-induced tolerance.     

加速康复外科理念在脊柱结核围手术期护理中的应用效果分析

目的: 分析探讨加速康复外科(ERAS)理念在脊柱结核围手术期护理应用中的效果。 方法: 收集青岛市胸科医院外科2017年7月至2020年6月收治的147例脊柱结核患者。其中,2017年7月至2018年12月收治的68例脊柱结核手术患者围手术期应用常规护理,作为对照组;2019年1月至2020年6月收治的79例脊柱结核手术患者在常规护理措施基础上融入了ERAS理念,作为ERAS组。比较两组患者的引流管拔除、最初下床进行功能锻炼、最初自主排尿的时间,术后72h疼痛(采用视觉模拟评分法)评分,住院天数,恶心呕吐、肺部感染、药物性肝损伤的发生率,以及患者满意度的差异。 结果: 与对照组相比,ERAS组患者引流管拔除时间[6.00(4.00,8.00)d和8.00(7.00,8.00)d;W=4321.000,P<0.001]、最初下床进行功能锻炼时间[2.00(2.00,4.00)d和5.50(4.25,6.00)d;W=3376.000,P<0.001]、首次在床上自主排尿时间[5.00(3.00,6.00)h和9.00(7.00,9.00)h;W=3369.000,P<0.001]、术后72h疼痛评分[3.00(2.00,4.00)分和5.00(5.00,6.00)分;W=4078.500,P<0.001]、住院总天数[19.00(18.00,21.00)d和22.00(19.00,27.00)d;W=4791.500,P<0.001]均有所下降,差异均有统计学意义。与对照组相比,ERAS组术后恶心呕吐发生率[7.6%(6/79)和19.1%(13/68);χ²=4.311,P=0.038]、肺部感染发生率[2.5%(2/79)和11.8%(8/68);χ²=4.914,P=0.027]、药物性肝损伤发生率[1.3%(1/79)和13.2%(9/68),χ²=8.258,P=0.004]均有所下降,差异均有统计学意义。ERAS组患者满意度高于对照组[96.2%(76/79)和85.3%(58/68),χ²=7.100,P=0.008],差异有统计学意义。 结论: ERAS理念应用于脊柱结核围手术期护理可以加速患者的康复,减少并发症的发生,提高患者的满意度。