Optimized 2-methoxyestradiol invasomes fortified with apamin: a promising approach for suppression of A549 lung cancer cells

Certain anticancer agents selectively target the nucleus of cancer cells. One such drug is 2-methoxyestradiol (2ME), which is used for treating lung cancer. To improve the therapeutic effectiveness of these agents, many new methods have been devised. 2ME was entrapped into the core of hydrophobic invasomes (INVA) covered with Phospholipon 90G and apamin (APA). The Box–Behnken statistical design was implemented to enhance the composition. Using Design-Expert software (Stat-Ease Inc., Minneapolis, MN), the INVA component quantities were optimized to obtain spherical particles with the smallest size, that is, a diameter of 167.8 nm. 2ME-INVA-APA significantly inhibited A549 cells and exhibited IC₅₀ of 1.15 ± 0.04 µg/mL, which is lower than raw 2ME (IC₅₀ 5.6 ± 0.2 µg/mL). Post 2ME-INVA-APA administration, a significant rise in cell death and necrosis was seen among the A549 cells compared to those treated with plain formula or 2ME alone. This effect was indicated by increased Bax expression and reduced Bcl-2 expression, as well as mitochondrial membrane potential loss. Moreover, the cell cycle analysis showed that 2ME-INVA-APA arrests the G2-M phase of the A549 cells. Additionally, it was observed that the micellar formulation of the drug increased the cell count in pre-G1, thereby exhibiting phenomenal apoptotic potential. Furthermore, it up-regulates caspase-9 and p53 and downregulates TNF-α and NF-κβ. Collectively, these findings showed that our optimized 2ME-INVA-APA could easily seep through the cell membrane and induce apoptosis in relatively low doses.     

A Numerical Measurement Method for Dynamic Granular Materials Based on Computer Vision

Granular materials are widespread in nature and human production, and their macro-mechanical behavior is significantly affected by granule movement. The development of computer vision has brought some new ideas for measuring the numerical information (including the amount of translation, the rotation angle, velocity, acceleration, etc.) of dynamic granular materials. In this paper, we propose a numerical measurement method for dynamic granular materials based on computer vision. Firstly, an improved video instance segmentation (VIS) network is introduced to perform end-to-end multi-task learning, and its temporal feature fusion module and tracking head with long-sequence external memory can improve the problems of poor video data quality and high similarity in appearance of granular materials, respectively. Secondly, the numerical information can be extracted through a series of post-processing steps. Finally, the effectiveness of the measurement method is verified by comparing the numerical measurement results with the real values. The experimental results indicate that our improved VIS obtains an average precision (AP) of 76.6, the relative errors and standard deviations are maintained at a low level, and this method can effectively be used to measure the numerical information of dynamic granular materials. This study provides an intelligent proposal for the task of measuring numerical information of dynamic granular materials, which is of great significance for studying the spatial distribution, motion mode and macro-mechanical behavior of granular materials.     

Hemangioma of the maxillary sinus: A benign and rare cause of epistaxis

Hemangioma of the facial sinuses is a rare pathology, and given the lack of clinical specificity, the differential diagnosis with a malignant lesion often arises. We report the case of a 32-year-old patient who consulted for recurrent epistaxis of moderate severity. The preoperative diagnosis of a hemangioma of the left maxillary sinus was based on computed tomography and magnetic resonance imaging data, confirmed by the anatomopathological study of the surgical specimen, preceded by an embolization that facilitated the endoscopic surgical excision.     

Beneficial effects of clopidogrel on glycemic indices and oxidative stress in patients with type 2 diabetes

Objective of present study is to evaluate the possible role of clopidogrel in improving glycemic indices and oxidative stress in patients with type 2 diabetes.This study was performed on 42 uncontrolled type 2 diabetic patients at the specialized center for Endocrinology and Diabetes, Al-Rasafa Directorate of Health, Baghdad. All of the patients were treated with (glibenclamide 5 mg at morning) and randomized into two groups: the first group includes 22 patients treated with clopidogrel tablets (75 mg/day) for 2 months; the second group includes 20 patients treated with a placebo formula (sodium bicarbonate 200 mg/day) for the same period. Treatment with clopidogrel produced significant improvement (P < 0.05) in fasting serum glucose (FSG), fasting serum insulin level, quantitative insulin sensitivity check index (QUICKI); and oxidative stress markers: serum malondialdehyde (MDA) and serum reduced glutathione (GSH) compared to their baseline levels. There was significant elevation (P < 0.05) in both FSG and fasting serum insulin and the MDA level with significant reduction (P < 0.05) in QUICKI of placebo group compared to their baseline levels. However, clopidogrel produced significant elevation (P < 0.05) in AST and ALT levels but placebo formula caused no significant alteration (P > 0.05) in the serum levels of these two enzymes.In conclusion the treatment with clopidogrel improved glycemic indices and reduced oxidative stress in patients with type 2 diabetes.     

Introduction of cadmium chloride additive to improve the performance and stability of perovskite solar cells

With the increase in the importance of using green energy sources to meet the world''s energy demands, attempts have been made to push perovskite solar cell technology toward industrialization all around the world. Improving the properties of perovskite materials as the heart of PSCs is one of the methods to fabricate favorable photovoltaic (PV) solar cells based on perovskites. Here, cadmium chloride (CdCl₂) was used as an additive source for the perovskite precursor to improve its PV properties. Results indicated CdCl₂ improves the perovskite growth and tailors its crystalline properties, suggesting boosted charge transport processes in the bulk and interfaces of the perovskite layer with electron–hole transport layers. Overall, by incorporation of 1.0% into the MAPbI₃ layer, a maximum power conversion efficiency of 15.28% was recorded for perovskite-based solar cells, higher than the 12.17% for the control devices. The developed method not only improved the PV performance of devices but also boosted the stability behavior of solar cells due to the passivated domain boundaries and enhanced hydrophobicity in the CdCl₂-based devices.

With the increase in the importance of using green energy sources to meet the world''s energy demands, attempts have been made to push perovskite solar cell technology toward industrialization all around the world.     

Evaluation of the Effect of the Loading Time on the Microtensile Bond Strength of Various Restorative Materials Bonded to Silver Diamine Fluoride-Treated Demineralized Dentin

The aim of this study was to evaluate the effect of immediate versus delayed loading times on the microtensile bond strength (μTBS) of restorative materials, including resin-based composite (RBC), resin-modified glass ionomer cement (RMGIC) and glass ionomer cement (GIC), that were bonded to silver diamine fluoride (SDF)-treated demineralized dentin. Ninety caries-free extracted premolar teeth were assigned to three groups (n = 30) loaded with RBC, RMGIC and GIC restorative materials. Each group was further divided into three subgroups (n = 10): subgroup A (control specimens), immediate loading of the restorative material on sound dentin; subgroup B, demineralized dentin, SDF treatment and immediate loading of the restorative material; and subgroup C, demineralized dentin, SDF treatment and restorative material loading a week later. One-way ANOVA and Tukey’s post-hoc tests were performed to compare the μTBS values. The RBC exhibited the highest µTBS, followed by RMGIC and GIC. Multiple comparisons showed an increase in the µTBS in the delayed loading groups irrespective of the restorative material used. The majority of the failure modes were adhesive. Delayed loading of RMGIC for 1 week after SDF application showed significantly higher µTBS than that of immediate loading.     

Magnetic Metal Oxide-Based Photocatalysts with Integrated Silver for Water Treatment

In this review, the most recent advances in the field of magnetic composite photocatalysts with integrated plasmonic silver (Ag) is presented, with an overview of their synthesis techniques, properties and photocatalytic pollutant removal applications. Magnetic attributes combined with plasmonic properties in these composites result in enhancements for light absorption, charge-pair generation-separation-transfer and photocatalytic efficiency with the additional advantage of their facile magnetic separation from water solutions after treatment, neutralizing the issue of silver’s inherent toxicity. A detailed overview of the currently utilized synthesis methods and techniques for the preparation of magnetic silver-integrated composites is presented. Furthermore, an extended critical review of the most recent pollutant removal applications of these composites via green photocatalysis technology is presented. From this survey, the potential of magnetic composites integrated with plasmonic metals is highlighted for light-induced water treatment and purification. Highlights: (1) Perspective of magnetic properties combined with plasmon metal attributes; (2) Overview of recent methods for magnetic silver-integrated composite synthesis; (3) Critical view of recent applications for photocatalytic pollutant removal.     

A Comparative Study to Evaluate the Essential Work of Fracture to Measure the Fracture Toughness of Quasi-Brittle Material

In the present work, three different woven composite laminates were fabricated using the hand lay-up method. The woven reinforcement fibres were carbon fibres (CFRP), glass fibres (GFRP-W) and (GFRP-R) in combination with epoxy resin. Then, the central notch specimen tensile test (CNT) was used to measure the fracture toughness and the corresponding surface release energy (GIC). Then, the data were compared with the essential work of fracture (we) values based on the stored energy of the body to obtain a new standard fracture toughness test for composite laminates using relatively simple techniques. In addition to an extended finite element model, XFEM was implemented over a central notch specimen geometry to obtain a satisfactory validation of the essential work of fracture concepts. Therefore, the average values of (GIC) were measured with CNT specimens 25.15 kJ/m², 32.5 kJ/m² and 20.22 kJ/m² for CFRP, GFRP-W and GFRP-R, respectively. The data are very close as the percentage error for the surface release energy measured by the two methods was 0.83, 4.6 and 5.16 for carbon, glass and random fibre composite laminates, respectively. The data for the fracture toughness of XFEM are also very close. The percentage error is 4.6, 5.25 and 2.95 for carbon, glass and random fibre composite laminates, respectively. Therefore, the fundamental work of the fracture concept is highly recommended as a fracture toughness test for composite laminates or quasi-brittle Material.