Hand-arm vibration syndrome and its prevalence in the present status of private forestry enterprises in Japan

Summary Currently there are no limitations on age of employment on private forestries in Japan. Hence, it was hypothesized that in these kind of enterprises, elderly chain saw operators, or those with long-term exposure, might be at higher risk of developing hand-arm vibration syndrome (HAVS). We consequently investigated the prevalence of HAVS in 447 chain saw workers on private forestries in Gifu Prefecture, Japan, with particular reference to age and exposure period. Of this population, 43 (9.6%) had signs and symptoms of vibration-induced white finger (VWF), and among these workers the severity of finger blanching was significantly correlated (P < 0.01) with the exposure period. Classification of all subjects by exposure period showed that workers with 30 years' exposure had higher prevalences of VWF (20.9%) and numbness of the hands (25.4%) compared to other groups. Significant differences (P < 0.01) were found between the functional capacities of workers with VWF and those of control subjects. We concluded that (a) the elderly chain saw operators and those with longer exposure should be moved to other jobs with a lower or no risk of exposure to vibration, and (b) the results of screening tests, even without cold water immersion (which we did not employ, in order to protect workers' hands), could be helpful for the identification of workers with VWF.     

Recycled Untreated Rubber Waste for Controlling the Alkali–Silica Reaction in Concrete

Recycled rubber waste (RW) is produced at an alarming rate due to the deposition of 1.5 billion scrap tires annually around the globe, which causes serious threats to the environment due to its open land filling issues. This study investigates the potential application of RW in concrete structures for mitigating the alkali–silica reaction (ASR). Various proportions of RW (5%, 10%, 15%, 20%, and 25%) partially replaced the used aggregates. RW was procured from a local rubber recycling unit. Cubes, prisms, and mortar bar specimens were prepared using a mixture design recommended by ASTM C1260 and tested for evaluating the compressive and flexural strengths and expansion in an ASR conducive environment for specimens incorporating RW. It was observed that the compressive and flexural strength decreased for specimens incorporating RW compared to that of the control specimens without RW. For example, an 18% and an 8% decrease in compressive and flexural strengths, respectively, were observed for specimens with 5% of RW by aggregates volume at 28 days. Mortar bar specimens without RW showed an expansion of 0.23% and 0.28% at 14 and 28 days, respectively, indicating the potential ASR reactivity in accordance with ASTM C1260. A decrease in expansion was observed for mixtures incorporating RW. Specimens incorporating 20% of RW by aggregate volume showed expansions of 0.17% at 28 days, within the limit specified by ASTM C1260. Moreover, specimens incorporating RW showed a lower reduction in compressive and flexural strengths under an ASR conducive environment compared to that of the control specimen without RW. Micro-structural analysis also showed significant micro-cracking for specimens without RW due to ASR. However, no surface cracks were observed for specimens incorporating RW. It can be argued that the use of RW in the construction industry assists in reducing the landfill depositing issues with the additional benefit of limiting the ASR expansion.     

Periorbital ecchymosis as a sign of perforating injury of the globe

The distinction between penetrating eye injury with retained intraocular foreign body and perforating globe injuries is not always easy clinically. The case is presented of a 25-year-old man who sustained a perforating eye injury that was through a clear self-sealing corneal entry site and had no conjunctival or periorbital injury. He had periorbital ecchymosis on presentation suggesting that the globe had been perforated with resulting retro-orbital blood tracking to the periorbital region. This sign would not be expected had the foreign body remained intraocular. The management options of these cases are discussed.     

Flexural Performance of Encased Pultruded GFRP I-Beam with High Strength Concrete under Static Loading

There is an interesting potential for the use of GFRP-pultruded profiles in hybrid GFRP-concrete structural elements, either for new constructions or for the rehabilitation of existing structures. This paper provides experimental and numerical investigations on the flexural performance of reinforced concrete (RC) specimens composite with encased pultruded GFRP I-sections. Five simply supported composite beams were tested in this experimental program to investigate the static flexural behavior of encased GFRP beams with high-strength concrete. Besides, the effect of using shear studs to improve the composite interaction between the GFRP beam and concrete as well as the effect of web stiffeners of GFRP were explored. Encasing the GFRP beam with concrete enhanced the peak load by 58.3%. Using shear connectors, web stiffeners, and both improved the peak loads by 100.6%, 97.3%, and 130.8%, respectively. The GFRP beams improved ductility by 21.6% relative to the reference one without the GFRP beam. Moreover, the shear connectors, web stiffeners, and both improved ductility by 185.5%, 119.8%, and 128.4%, respectively, relative to the encased reference beam. Furthermore, a non-linear Finite Element (FE) model was developed and validated by the experimental results to conduct a parametric study to investigate the effect of the concrete compressive strength and tensile strength of the GFRP beam. The developed FE model provided good agreement with the experimental results regarding deformations and damaged patterns.     

Titanium-Pillared Clay: Preparation Optimization,Characterization, and Artificial Neural Network Modeling

Titanium-pillared clay (Ti-PILC), as one of the most suitable types of porous adsorbents/(photo)catalysts, was prepared from a local type of Iranian clay and titanium isopropoxide. The production process was optimized by changing three operating parameters, including the clay suspension concentration (in the range of 0.5–10% w/v), the H⁺/Ti ratio (2–8 mol/mol), and the calcination temperature (300–700 °C). The largest specific surface area for the Ti-PILC was about 164 m²/g under the clay suspension of 0.5% w/v, H⁺/Ti = 6, with a surface area 273% larger than that of the raw clay. The surface areas obtained from more concentrated clay suspensions were, however, comparable (159 m²/g for 3% w/v clay and H⁺/Ti = 4). An increase in the calcination temperature has a negative effect on the porous texture of Ti-PILC, but based on modeling with artificial neural networks, its contribution was only 7%. Clay suspension and H⁺/Ti ratio play a role of 56 and 37% of the specific surface area. The presence of rutile phase, and in some cases anatase phase of TiO₂ crystals was detected. FTIR and SEM investigations of Ti-PILCs produced under different operating parameters were analyzed.     

Forecasting the Post-Pandemic Effects of the SARS-CoV-2 Virus Using the Bullwhip Phenomenon Alongside Use of Nanosensors for Disease Containment and Cure

The COVID-19 pandemic has the tendency to affect various organizational paradigm alterations, which civilization hasyet to fully comprehend. Personal to professional, individual to corporate, and across most industries, the spectrum of transformations is vast. Economically, the globe has never been more intertwined, and it has never been subjected to such widespread disruption. While many people have felt and acknowledged the pandemic’s short-term repercussions, the resultant paradigm alterations will certainly have long-term consequences with an unknown range and severity. This review paper aims at acknowledging various approaches for the prevention, detection, and diagnosis of the SARS-CoV-2 virus using nanomaterials as a base material. A nanostructure is a material classification based on dimensionality, in proportion to the characteristic diameter and surface area. Nanoparticles, quantum dots, nanowires (NW), carbon nanotubes (CNT), thin films, and nanocomposites are some examples of various dimensions, each acting as a single unit, in terms of transport capacities. Top-down and bottom-up techniques are used to fabricate nanomaterials. The large surface-to-volume ratio of nanomaterials allows one to create extremely sensitive charge or field sensors (electrical sensors, chemical sensors, explosives detection, optical sensors, and gas sensing applications). Nanowires have potential applications in information and communication technologies, low-energy lightning, and medical sensors. Carbon nanotubes have the best environmental stability, electrical characteristics, and surface-to-volume ratio of any nanomaterial, making them ideal for bio-sensing applications. Traditional commercially available techniques have focused on clinical manifestations, as well as molecular and serological detection equipment that can identify the SARS-CoV-2 virus. Scientists are expressing a lot of interest in developing a portable and easy-to-use COVID-19 detection tool. Several unique methodologies and approaches are being investigated as feasible advanced systems capable of meeting the demands. This review article attempts to emphasize the pandemic’s aftereffects, utilising the notion of the bullwhip phenomenon’s short-term and long-term effects, and it specifies the use of nanomaterials and nanosensors for detection, prevention, diagnosis, and therapy in connection to the SARS-CoV-2.