Translating Mechanism-Based Strategies to Break the Obesity−Cancer Link: A Narrative Review

Prevalence of obesity, an established risk factor for many cancers, has increased dramatically over the past 50 years in the United States and across the globe. Relative to normoweight cancer patients, obese cancer patients often have poorer prognoses, resistance to chemotherapies, and are more likely to develop distant metastases. Recent progress on elucidating the mechanisms underlying the obesity?cancer connection suggests that obesity exerts pleomorphic effects on pathways related to tumor development and progression and, thus, there are multiple opportunities for primary prevention and treatment of obesity-related cancers. Obesity-associated alterations, including systemic metabolism, adipose inflammation, growth factor signaling, and angiogenesis, are emerging as primary drivers of obesity-associated cancer development and progression. These obesity-associated host factors interact with the intrinsic molecular characteristics of cancer cells, facilitating several of the hallmarks of cancer. Each is considered in the context of potential preventive and therapeutic strategies to reduce the burden of obesity-related cancers. In addition, this review focuses on emerging mechanisms behind the obesity?cancer link, as well as relevant dietary interventions, including calorie restriction, intermittent fasting, low-fat diet, and ketogenic diet, that are being implemented in preclinical and clinical trials, with the ultimate goal of reducing incidence and progression of obesity-related cancers.     

Evaluation of Hydrogen Exchange Mass Spectrometry as a Stability-Indicating Method for Formulation Excipient Screening for an IgG4 Monoclonal Antibody

Antibodies are molecules that exhibit diverse conformational changes on different timescales, and there is ongoing interest to better understand the relationship between antibody conformational dynamics and storage stability. Physical stability data for an IgG4 monoclonal antibody (mAb-D) were gathered through traditional forced degradation (temperature and stirring stresses) and accelerated stability studies, in the presence of different additives and solution conditions, as measured by differential scanning calorimetry, size exclusion chromatography, and microflow imaging. The results were correlated with hydrogen exchange mass spectrometry (HX-MS) data gathered for mAb-D in the same formulations. Certain parameters of the HX-MS data, including hydrogen exchange in specific peptide segments in the C_H2 domain, were found to correlate with stabilization and destabilization of additives on mAb-D during thermal stress. No such correlations between mAb physical stability and HX-MS readouts were observed under agitation stress. These results demonstrate that HX-MS can be set up as a streamlined methodology (using minimal material and focusing on key peptide segments at key time points) to screen excipients for their ability to physically stabilize mAbs. However, useful correlations between HX-MS and either accelerated or real-time stability studies will be dependent on a particular mAb's degradation pathway(s) and the type of stresses used.     

D-Optimal Design in the Development of Rheologically Improved In Situ Forming Ophthalmic Gel

In situ forming ophthalmic gels need to be fine tuned considering all the biopharmaceutical challenges of the front of the eye in order to increase drug residence time at the application site resulting in its improved bioavailability and efficacy. The aim of this study was to develop in situ forming ophthalmic poloxamer P407/poloxamer P188/chitosan gel fine tuned in terms of polymer content, temperature of gelation, and viscosity. Minimizing the total polymer content while retaining the advantageous rheological properties has been achieved by means of D-optimal statistical design. The optimal in situ forming gel was selected based on minimal polymer content (P407, P188, and chitosan concentration of 14.2%, 1.7%, and 0.25% w/w, respectively), favorable rheological characteristics, and in vitro resistance to tear dilution. The optimal in situ forming gel was proved to be robust against entrapment of active pharmaceutical ingredients making it a suitable platform for ophthalmic delivery of active pharmaceutical ingredients with diverse physicochemical properties.     

The Influence of In Vivo Metabolic Modifications on ADMET Properties of Green Tea Catechins–In Silico Analysis

The health effects of green tea are associated with catechins: (?)-epigallocatechin-3-O-gallate (EGCG), (?)-epigallocatechin, (?)-epicatechin-3-O-gallate, and (?)-epicatechin. An understanding of compound absorption, distribution, metabolism, excretion, and toxicity characteristics is essential for explaining its biological activities. Herein, absorption, distribution, metabolism, excretion, and toxicity properties of in vivo detected metabolites of green tea catechins (GTCs) have been analyzed in silico. The influence of metabolic transformations on absorption, distribution, metabolism, and excretion profiles of GTCs corresponds to the effects of size, charge, and lipophilicity, as already observed for other small molecules. Mutagenic, carcinogenic, or liver toxic effects were predicted only for a few metabolites. Similar to galloylated GTCs EGCG and (--)-epicatechin-3-O-gallate, the sulfo-conjugates were predicted to bind at the warfarin binding site. The low free plasma concentration of these derivatives may be consequential to their serum albumin binding. The activity cliff detected for methylated conjugates of EGCG indicates that GTCs' pro-oxidative activity in bound state comes primarily from free hydroxyl groups of the pyrogallol ring B.     

Impact of Glycosylation on the Local Backbone Flexibility of Well-Defined IgG1-Fc Glycoforms Using Hydrogen Exchange-Mass Spectrometry

We have used hydrogen exchange–mass spectrometry to characterize local backbone flexibility of 4 well-defined IgG1-Fc glycoforms expressed and purified from Pichia pastoris, 2 of which were prepared using subsequent in vitro enzymatic treatments. Progressively decreasing the size of the N-linked N297 oligosaccharide from high mannose (Man8-Man12), to Man5, to GlcNAc, to nonglycosylated N297Q resulted in progressive increases in backbone flexibility. Comparison of these results with recently published physicochemical stability and Fcγ receptor binding data with the same set of glycoproteins provide improved insights into correlations between glycan structure and these pharmaceutical properties. Flexibility significantly increased upon glycan truncation in 2 potential aggregation-prone regions. In addition, a correlation was established between increased local backbone flexibility and increased deamidation at asparagine 315. Interestingly, the opposite trend was observed for oxidation of tryptophan 277 where faster oxidation correlated with decreased local backbone flexibility. Finally, a trend of increasing C'E glycopeptide loop flexibility with decreasing glycan size was observed that correlates with their FcγRIIIa receptor binding properties. These well-defined IgG1-Fc glycoforms serve as a useful model system to identify physicochemical stability and local backbone flexibility data sets potentially discriminating between various IgG glycoforms for potential applicability to future comparability or biosimilarity assessments.     

Demonstration of In Vitro Host-Guest Complex Formation and Safety of para-Sulfonatocalix[8]arene as a Delivery Vehicle for Two Antibiotic Drugs

The macrocycle para-sulfonatocalix[8]arene, sCX[8], was examined with 2 antibiotic drugs, ciprofloxacin (CIP) and isoniazid. The drugs were shown to form complexes with sCX[8] using proton nuclear magnetic resonance, thermogravimetric analysis, fluorescence spectroscopy, and molecular modeling. Both drugs form 1:1 hydrated (H₂O: 13%-14% w/w) host-guest complexes, with sCX[8] binding around the pyridine ring of isoniazid, and around the piperazine and cyclopropane rings of CIP. From proton nuclear magnetic resonance, the binding constant of isoniazid to sCX[8] was 6.8 (±0.3) × 10³ M^?1. Addition of 2 equivalents of sCX[8] to CIP resulted in a 58% decrease in fluorescence, and time-resolved fluorescence anisotropy of CIP doubles with sCX[8]. Each drug binds into the cavity of the macrocycle, with binding stabilized via combinations of hydrogen bonding, electrostatic interactions, π-π stacking, and hydrophobic effects. The safety of sCX[8] was examined in vitro with human embryonic kidney 293 cells. The IC₅₀ of sCX[8] was 559 μM, which is a minimum of 5-fold higher than the concentration that would be used in the clinic. The in vitro effect of sCX[8] on the action of CIP was examined on a panel of bacterial lines. The results showed that sCX[8] has no inherent antibiotic activity and had no negative effect on the action of CIP.     

Dibucaine in Ionic-Gradient Liposomes: Biophysical,Toxicological, and Activity Characterization

Administration of local anesthetics is one of the most effective pain control techniques for postoperative analgesia. However, anesthetic agents easily diffuse into the injection site, limiting the time of anesthesia. One approach to prolong analgesia is to entrap local anesthetic agents in nanostructured carriers (e.g., liposomes). Here, we report that using an ammonium sulphate gradient was the best strategy to improve the encapsulation (62.6%) of dibucaine (DBC) into liposomes. Light scattering and nanotracking analyses were used to characterize vesicle properties, such as, size, polydispersity, zeta potentials, and number. In vitro kinetic experiments revealed the sustained release of DBC (50% in 7 h) from the liposomes. In addition, in vitro (3T3 cells in culture) and in vivo (zebrafish) toxicity assays revealed that ionic-gradient liposomes were able to reduce DBC cyto/cardiotoxicity and morphological changes in zebrafish larvae. Moreover, the anesthesia time attained after infiltrative administration in mice was longer with encapsulated DBC (27 h) than that with free DBC (11 h), at 320 μM (0.012%), confirming it as a promising long-acting liposome formulation for parenteral drug administration of DBC.     

Effect of correcting for gestational age at birth on population prevalence of early childhood undernutrition

Background

Postmenstrual and/or gestational age-corrected age (CA) is required to apply child growth standards to children born preterm (< 37 weeks gestational age). Yet, CA is rarely used in epidemiologic studies in low- and middle-income countries (LMICs), which may bias population estimates of childhood undernutrition. To evaluate the effect of accounting for GA in the application of growth standards, we used GA-specific standards at birth (INTERGROWTH-21st newborn size standards) in conjunction with CA for preterm-born children in the application of World Health Organization Child Growth Standards postnatally (referred to as ‘CA’ strategy) versus postnatal age for all children, to estimate mean length-for-age (LAZ) and weight-for-age (WAZ) z scores at 0, 3, 12, 24, and 48-months of age in the 2004 Pelotas (Brazil) Birth Cohort.

Results

At birth (n = 4066), mean LAZ was higher and the prevalence of stunting (LAZ < ?2) was lower using CA versus postnatal age (mean ± SD): ? 0.36 ± 1.19 versus ? 0.67 ± 1.32; and 8.3 versus 11.6%, respectively. Odds ratio (OR) and population attributable risk (PAR) of stunting due to preterm birth were attenuated and changed inferences using CA versus postnatal age at birth [OR, 95% confidence interval (CI): 1.32 (95% CI 0.95, 1.82) vs 14.7 (95% CI 11.7, 18.4); PAR 3.1 vs 42.9%]; differences in inferences persisted at 3-months. At 12, 24, and 48-months, preterm birth was associated with stunting, but ORs/PARs remained attenuated using CA compared to postnatal age. Findings were similar for weight-for-age z scores.

Conclusions

Population-based epidemiologic studies in LMICs in which GA is unused or unavailable may overestimate the prevalence of early childhood undernutrition and inflate the fraction of undernutrition attributable to preterm birth.

     

Demonstration of pharmaceutical tablet coating process by injection molding technology

We demonstrate the coating of tablets using an injection molding (IM) process that has advantage of being solvent free and can provide precision coat features. The selected core tablets comprising 10% w/w griseofulvin were prepared by an integrated hot melt extrusion-injection molding (HME-IM) process. Coating trials were conducted on a vertical injection mold machine. Polyethylene glycol and polyethylene oxide based hot melt extruded coat compositions were used. Tablet coating process feasibility was successfully demonstrated using different coating mold designs (with both overlapping and non-overlapping coatings at the weld) and coat thicknesses of 150 and 300?μm. The resultant coated tablets had acceptable appearance, seal at the weld, and immediate drug release profile (with an acceptable lag time). Since IM is a continuous process, this study opens opportunities to develop HME-IM continuous processes for transforming powder to coated tablets.