Disease activity in systemic lupus erythematosus patients with end-stage renal disease: systematic review of the literature

It is not unusual that patients with systemic lupus erythematosus (SLE) progress to terminal renal failure and subsequently require renal replacement therapy. Previous studies have shown that clinical and/or serological remission in patients with SLE is common in those who develop end-stage renal disease (ESRD). On the other hand, the persistence of lupus activity among patients undergoing long-term dialysis is not rare, either. The aim of this study is to define, by means of a systematic review, the course of SLE activity in patients who developed ESRD. Data were obtained through searches for articles in the MEDLINE (1966 to 2011), SCielo, and LILACS databases, using the following keywords: "chronic renal failure", "systemic lupus erythematosus", "end-stage renal disease", "lupus activity", "disease activity", "lupus flare", "hemodialysis", and "renal replacement therapy" and their corresponding translations in Portuguese. Twenty-four articles were found which evaluated the degree of lupus activity in patients with ESRD. Fifteen of these studies spoke of a substantial reduction of clinical and/or serological activity after the development of ESRD, while nine articles found that the amount of clinical and/or serological activity was similar to that of the phase prior to terminal renal failure, or it occurred in at least 50% of the patients studied. Although the majority of studies showed that lupus flares tend to decrease in frequency in patients who develop ESRD, in this scenario, one should be prepared to correctly diagnose a recurrence of the disease, as well as to perform appropriate therapy.     

Post‐transplant lymphoproliferative disorder in adult liver transplant recipients: a South American multicenter experience

Post‐transplant lymphoproliferative disorder (PTLD) is a major and potentially life‐threatening complication after solid‐organ transplantation. The aim of this study was to describe the disease characteristics, clinical practices, and survival related to PTLD in adult orthotopic liver transplant (OLT) recipients in South America. We conducted a survey at four different transplant groups from Argentina, Brazil, and Chile. Among 1621 OLT recipients, 27 developed PTLD (1.7%); the mean age at diagnosis was 53.7 (±14) yr with a mean time of 39.7 (±35.2) months from OLT to PTLD diagnosis. Initial therapy included reduction in immunosuppression alone in 23.1% of the patients. Either rituximab or chemotherapy was employed as initial or second‐line therapy in 76.9% of the patients. PTLD location was frequently extranodal (80.7%) and mostly involving the transplanted liver (59.3%). The overall survival at one and five yr post‐PTLD diagnosis was 53.8% and 46.2%, respectively. Significant univariate risk factors for post‐PTLD mortality included lactate dehydrogenase ≥250 U/L (HR 9.66, p = 0.02), stage III/IV PTLD (HR 5.34, p = 0.004), and HCV infection (HR 7.68, p = 0.01). In conclusion, PTLD in OLT adult recipients is predominantly extranodal, and although mortality is high, long‐term survival is possible.     

Infektionsschutzrecht

Background

Legal regulations concerning infection protection have been repeatedly revised in the last few years. At the national level the regulations for notifable diseases were recently broadened to include the suspicion of disease, the disease and death due to mumps, pertussis, rubella including congenital rubella and varicella (chickenpox). In addition notification deadlines were shortened in the new regulations and the information to be reported was expanded. At the “Bundesländer” level, there are also new regulations which expand notification concerning diseases and are extended to other contagious diseases. In addition, infection protection also includes measures to prevent and combat contagious diseases.

Objective

This article describes the current legal situation.     

Bone mineral density: Methods of measurement and its influence on primary stability of miniscrews

Objective:To verify whether bone mineral density (BMD) of cortical bone, trabecular bone, and total bone influence the primary stability of orthodontic miniscrews and to verify whether there is a correlation between the measurement of BMD by cone-beam computed tomography (CBCT) and central dual-energy x-ray absorptiometry (DEXA).Materials and Methods:Twenty bovine bone sections were extracted from the pubic and iliac bones from regions with cortical thicknesses of approximately 1 mm. The BMD of the total bone block was evaluated using two methods: CBCT and DEXA. The BMD of cortical, trabecular, and total bone in the region of interest (ROI) were also evaluated by CBCT. After scanning the bone blocks, 20 self-drilling miniscrews (INP®) 1.4 mm in diameter and 6 mm long were inserted into them. The peak implant insertion torque (IT) was registered. After this, the pull-out test (PS) was performed and the maximum force registered. The Pearson correlation test was applied to verify the correlations between variables.Results:The BMD of the total bone block verified by CBCT and DEXA showed a positive and strong correlation (r  =  0.866, P  =  .000). The BMD of the ROI for cortical bone influenced the IT (r  =  0.518, P  =  .40) and the PS of miniscrews (r  =  0.713, P  =  .001, Table 2). However, the total bone BMD (verified by CBCT and DEXA) and trabecular bone BMD presented weak and not statistically significant correlations with primary stability.Conclusions:There was a positive correlation between total bone block BMD measured by DEXA and CBCT. The cortical BMD influenced the IT and PS.     

Effects of chemical composition on the corrosion of dental alloys

The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissolution of the ions occurred in all tested dental alloys and the results were strongly dependent on the general alloy composition. Regarding the alloys containing nickel, the Ni-Cr and Ni-Cr-Ti alloys released 0.62 mg/L of Ni on average, while the Co-Cr dental alloy released ions between 0.01 and 0.03 mg/L of Co and Cr, respectively.The open-circuit potential stabilized at a higher level with lower deviation (standard deviation: Ni-Cr-6Ti = 32 mV/SCE and Co-Cr = 54 mV/SCE). The potenciodynamic curves of the dental alloys showed that the Ni-based dental alloy with >70 wt% of Ni had a similar curve and the Co-Cr dental alloy showed a low current density and hence a high resistance to corrosion compared with the Ni-based dental alloys. Some changes in microstructure were observed and this fact influenced the corrosion behavior for the alloys. The lower corrosion resistance also led to greater release of nickel ions to the medium. The quantity of Co ions released from the Co-Cr-Mo alloy was relatively small in the solutions. In addition, the quantity of Cr ions released into the artificial saliva from the Co-Cr alloy was lower than Cr release from the Ni-based dental alloys.     

Numerical analysis of the biomechanical behaviour of a weakened root after adhesive reconstruction and post-core rehabilitation

Objectives

The purpose of this study was to perform a finite element analysis to determine whether adhesive reconstruction is able to restore the original biomechanical behaviour of weakened roots, in terms of fracture resistance, when compared with post/crown-restored teeth with intact roots.

Methods

A three-dimensional model of a maxillary central incisor was created. The model simulated an endodontically treated tooth restored with a glass-fibre post, a composite-resin core and a metal crown (Model 1). Based on Model 1, a new volume was created in the root cervical third that represented the area where the dentine structure was lost, resulting in a structurally damaged root (Model 2). A 100 N load was applied to the palatal surface at 130° from the long axis of the tooth. After processing (Ansys^® 10.0 – Canonsburg, PA, USA), the principal normal stress data were analyzed (S1, tensile; S3, compressive).

Results

The models demonstrated a similar S1 distribution concentrated in the lingual cervical region but different S1 levels (Model 1: 28.7 MPa; Model 2: 35.3 MPa). The S3 distribution indicated differences in behaviour between the models (Model 1: −18 to −27 MPa along the buccal root surface; Model 2: −25 to −32 MPa on the post buccal surface and along the buccal root wall).

Conclusions

Although the stress distribution within the root walls remained below the ultimate stress limit of the root dentine, the adhesive reconstruction of the weakened roots did not recover the load resistance of structurally intact roots.

Clinical significance

The decision of when to prosthetically rehabilitate weakened roots with cervical dentine structural tissue loss is a challenge for clinicians. A ‘monoblock’ adhesive reconstruction has been proposed for root reinforcement. During treatment planning, the possibility of restoring the mechanical resistance of the root must be evaluated if successful long-term results are to be achieved.