D6S1043、D12S391基因座与主动攻击行为的关联研究

目的:探讨D6S1043、D12S391基因座的基因多态性对主动攻击行为的影响。方法:应用聚合酶链反应技术结合毛细管电泳法对114例男性主动攻击行为者(研究组)及120名健康男性(对照组)进行D6S1043、D12S391基因座的基因型及等位基因检测,分析D6S1043、D12S391基因座多态性与主动攻击行为的相关性。结果:研究组D6S1043基因座中12~19基因型频率(13.16%)明显高于对照组(1.67%)(P0.05);两组等位基因频率差异无统计学意义;两组D12S391基因座的基因型及等位基因频率差异无统计学意义。结论:D6S1043基因座中12~19基因型可能主动攻击行为有关。     

ADAM33 polymorphisms and susceptibility to allergic rhinitis: a meta-analysis

European Archives of Oto-Rhino-Laryngology - Several polymorphisms in a disintegrin and metalloproteinase 33 (ADAM33) have been implicated in susceptibility to allergic rhinitis (AR), but the...     

Severe lumbar spinal stenosis combined with Guillain-Barré syndrome: A case report

BACKGROUNDGuillain-Barré syndrome (GBS) is a rare disorder that typically presents with ascending weakness, pain, paraesthesias, and numbness, which mimic the findings in lumbar spinal stenosis. Here, we report a case of severe lumbar spinal stenosis combined with GBS.CASE SUMMARYA 70-year-old man with a history of lumbar spinal stenosis presented to our emergency department with severe lower back pain and lower extremity numbness. Magnetic resonance imaging confirmed the diagnosis of severe lumbar spinal stenosis. However, his symptoms did not improve postoperatively and he developed dysphagia and upper extremity numbness. An electromyogram was performed. Based on his symptoms, physical examination, and electromyogram, he was diagnosed with GBS. After 5 d of intravenous immunoglobulin (0.4 g/kg/d for 5 d) therapy, he gained 4/5 of strength in his upper and lower extremities and denied paraesthesias. He had regained 5/5 of strength in his extremities when he was discharged and had no symptoms during follow-up.CONCLUSIONGBS should be considered in the differential diagnosis of spinal disorder, even though magnetic resonance imaging shows severe lumbar spinal stenosis. This case highlights the importance of a careful diagnosis when a patient has a history of a disease and comes to the hospital with the same or similar symptoms.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

门诊和病房电脑鼠标细菌污染情况调查

目的调查门诊和普通病房电脑鼠标不同时段的细菌污染情况。方法随机抽取某院门诊及普通病房的各16个电脑鼠标，分别于8∶00、10∶30、13∶00、15∶30进行采样，样本接种培养后对菌落计数并筛查多重耐药菌。结果32个鼠标共计采样128次，最高菌落数达121 CFU/cm2，平均菌落数为23.9 CFU/cm2。随着时间的推移，同一鼠标的细菌计数逐渐增多。不同时段门诊和病房的电脑鼠标菌落数比较，在10∶30、13∶00、15∶30三个时间点，病房鼠标的菌落数均高于门诊（均P≤0.05）。64个病房电脑鼠标标本中检出耐甲氧西林金黄色葡萄球菌（MRSA）和耐碳青霉烯类鲍曼不动杆菌（CRAB）各1株。结论加强鼠标日常清洁消毒及监测工作非常重要，应增加清洁消毒频率或更换长效消毒剂，加强病房环境的清洁消毒。     

Myeloid-derived suppressor cell (MDSC) key genes analysis in rat anti-CD28-induced immune tolerance kidney transplantation

BackgroundIn the field of transplantation, inducing immune tolerance in recipients is of great importance. Blocking co-stimulatory molecule using anti-CD28 antibody could induce tolerance in a rat kidney transplantation model. Myeloid-derived suppressor cells (MDSCs) reveals strong immune suppressive abilities in kidney transplantation. Here we analyzed key genes of MDSCs leading to transplant tolerance in this model.MethodsMicroarray data of rat gene expression profiles under accession number {"type":"entrez-geo","attrs":{"text":"GSE28545","term_id":"28545"}}GSE28545 in the Gene Expression Omnibus (GEO) database were analyzed. Running the LIMMA package in R language, the differentially expressed genes (DEGs) were found. Enrichment analysis of the DEGs was conducted in the Database for Annotation, Visualization and Integrated Discovery (DAVID) database to explore gene ontology (GO) annotation and their Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Their protein-protein interactions (PPIs) were provided by STRING database and was visualized in Cytoscape. Hub genes were carried out by CytoHubba.ResultsThree hundred and thirty-eight DEGs were exported, including 27 upregulated and 311 downregulated genes. The functions and KEGG pathways of the DEGs were assessed and the PPI network was constructed based on the string interactions of the DEGs. The network was visualized in Cytoscape; the entire PPI network consisted of 192 nodes and 469 edges. Zap70, Cdc42, Stat1, Stat4, Ccl5 and Cxcr3 were among the hub genes.ConclusionsThese key genes, corresponding proteins and their functions may provide valuable background for both basic and clinical research and could be the direction of future studies in immune tolerance, especially those examining immunocyte-induced tolerance.     

社区“5+1”糖尿病分阶段达标管理对2型糖尿病患者生存质量干预效果分析

目的 分析社区"5+1"糖尿病分阶段达标管理对2型糖尿病患者生存质量的干预效果及其影响因素，为提高患者生存质量提供依据。方法 采用分层整群抽样的方法在山西省、江苏省和宁夏回族自治区选择12个社区卫生服务中心，分别作为干预组（管理方式：社区"5+1"糖尿病分阶段达标管理）、对照组[管理方式：依据《国家基本公共卫生服务规范（2011年版）》的相关要求]，进行为期2年的随访观察。采用面对面问卷调查的方式，收集患者的人口学信息等基本信息；采用健康调查简表（SF-36）对患者在干预前后测量生存质量。采用SAS 9.4软件进行双重差分法以及多重线性回归模型分析。结果 基线时共纳入2 467名研究对象，终末时共1 924人接受了为期2年完整的随访管理。干预后，干预组、对照组患者生理健康维度（PCS）、心理健康维度（MCS）评分变化净差值分别为13.6分、29.8分。多重线性回归分析结果显示，影响患者PCS得分的主要因素有年龄、医保类型、基线PCS得分以及所在地区，影响患者MCS得分的主要因素有年龄、医保类型、基线MCS得分、是否合并高血压以及所在地区。结论 社区"5+1"糖尿病分阶段达标管理对2型糖尿病患者生存质量的干预效果较好。