The Periodontitis and Vascular Events (PAVE) pilot study: adverse events

BACKGROUND: During the last 15 years, a substantial number of population-based, clinical, laboratory, and animal studies have been published that reported findings on the relationship between periodontal disease and cardiovascular disease. The Periodontitis and Vascular Events (PAVE) pilot study was conducted to investigate the feasibility of a randomized secondary prevention trial to test whether treatment of periodontal disease reduces the risk for cardiovascular disease. This article describes the occurrence of adverse events during the pilot study. METHODS: The PAVE pilot study was a multicenter, randomized trial comparing periodontal therapy to community dental care. Baseline and follow-up clinic visits included a periodontal examination; blood, subgingival plaque, and crevicular fluid specimen collection; and medical and dental histories. Telephone follow-up contacts were scheduled to occur 3 months after randomization and every 6 months thereafter to assess adverse events or endpoints. RESULTS: Cardiovascular adverse events occurred with similar frequency (23 versus 24 [P = 0.85] in the community control and the treatment groups, respectively). There were 15 serious adverse events (SAEs) with a non-significantly higher percentage occurring in the community care group (6.6% versus 3.3%; P = 0.19). A time-to-event analysis of patterns of SAEs indicated that subjects in the periodontal therapy group tended to be less likely to experience an SAE over the entire 25 months of the study. CONCLUSION: For those individuals who remained in the study, it appears that provision of periodontal scaling and root planing treatment to individuals with heart disease resulted in a similar pattern of adverse events as seen in the community care group, which also received some treatment.     

Do self-curing acrylic resin repairs gain strength with age?

The effect of age on the strength of self-curing acrylic resin repairs has been investigated. Several other properties which may be related were also studied. The findings indicate that the strength of a repair increases with time, attaining a significant proportion of its final strength by 24 hours and reaching a maximum between 1 day and 1 week.     

Structural conformation and leaching from in vitro aged and retrieved Invisalign appliances

The objectives of this study were to investigate the structure of Invisalign appliances (Align Technology, Santa Clara, Calif) after intraoral exposure, and to qualitatively and quantitatively characterize the substances leached from the aligners after accelerated in vitro aging. Samples of Invisalign appliances were randomly selected from 10 patients before intraoral placement and after retrieval, and the prepared specimens were subjected to (1) bright-field optical reflection microscopy to study the surface morphology; (2) Fourier transform infrared microspectroscopy to characterize the in vivo changes in molecular composition induced on appliance surfaces, (3) scanning electron microscopy and energy dispersive X-ray microanalysis to identify the elemental composition of integuments formed on the surface, and (4) Vickers hardness (HV 200) testing. Another set of reference and retrieved appliances was subjected to artificial aging for 2 weeks, and the extracts were subjected to gas chromatography-mass spectroscopy. The retrieved appliances demonstrated substantial morphological variation relative to the as-received specimens involving abrasion at the cusp tips, adsorption of integuments, and localized calcification of the precipitated biofilm at stagnation sites. Buccal segments of retrieved appliances showed an increase in hardness, which might be attributed to mastication-induced cold work; however, the clinical implication of this effect on mechanotherapy is unknown. In vitro aged and retrieved appliances were found to leach no traceable amount of substances in an ethanol aging solution.     

Cartilage formation by serial passaged cultured chondrocytes in a new scaffold: Hybrid 75:25 poly(L-lactide-ε-caprolactone) sponge

PURPOSE: This study was designed to determine whether multipled chondrocytes immersed in a new scaffold, 75:25 poly(L-lactide-epsilon-caprolactone) sponge coated with type I collagen (75-PLC scaffold), could be used to generate cartilage tissue in vivo and to evaluate the correlation between cartilage generation and the phenotype of the proliferated chondrocytes. MATERIALS AND METHODS: Rat chondrocytes were suspended in 75-PLC scaffold at a density of 1 x 10 7 cells/mL after proliferation in a monolayer for 1 (P1) to 4 passages (P4) and implanted in nude mice for 4 weeks. Cells were characterized by the expression of genes encoding type II collagen, aggrecan, and type I collagen by Northern hybridization, and consequently, the newly formed tissue was evaluated histologically. RESULTS: The expression of aggrecan messenger RNA gradually decreased with the passaged cultures; however, the expression of type I collagen messenger RNA increased with time. The cartilage formations in all specimens were found not only in P1 chondrocytes but also in P2 chondrocytes, although when P3 chondrocytes were grafted, approximately 50% of cartilage formation was still observed up to but not beyond P4. CONCLUSION: It is suggested that cartilage tissue is generated with cultured chondrocytes up to P2 but not beyond P4. Northern blot analysis is useful for the assessment of whether the cells are capable of regeneration.     

The pharyngeal mucosal, parapharyngeal, and retropharyngeal spaces

Mass lesions in the deep neck spaces cannot be examined directly but instead require sectional imaging examinations. This pictorial essay reviews cases of mass and/or mass-like lesions in the oral cavity and/or the pharyngeal region that were radiologically diagnosed at our department. The purpose of this paper is to introduce to oral radiologists several key points in the sectional imaging diagnosis of a variety of lesions of the pharyngeal mucosal space, parapharyngeal space, and retropharyngeal spaces. To help readers make full use of CT or MR image findings of lesions in these spaces, we provide actual images of common diseases that occur in either the oral cavity or the neck. By focusing on displacements of fat, vessels, muscles, and bony structures in each space, oral radiologists can narrow the range of possible differential diagnoses. Familiarity with not only the anatomy of these spaces but also with the diseases specific to them and, in turn, their radiological manifestations, can help oral radiologists reach an accurate diagnosis.     

An In Vitro Investigation of a Comparison of Bond Strengths of Composite to Etched and Air-Abraded Human Enamel Surfaces

PURPOSE: The purposes of the study were to measure the tensile bond strength of composite resin to human enamel specimens that had been either etched or air-abraded, and to compare the quality of the marginal seal, through the assessment of microleakage, of composite resin to human enamel specimens that had been either etched or air-abraded. MATERIALS AND METHODS: Thirty mandibular molar teeth were decoronated and sectioned mesio-distally to produce six groups, each containing ten specimens that were embedded in acrylic resin using a jig. In each of the four treatment groups, the specimen surfaces were treated by either abrasion with 27 or 50 microm alumina at 4 mm or 20 mm distance, and a composite resin was bonded to the treated surfaces in a standardized manner. In the two control groups the specimens were treated with 15 seconds exposure to 36% phosphoric acid gel and then similarly treated before being stored in sterile water for 1 week. All specimens were then subjected to tensile bond strength testing at either 1 or 5 mm/min crosshead speed. For the microleakage study, the degree of dye penetration was measured 32 times for each treatment group, using a neutral methylene blue dye at the interface between composite and either 27 or 50 microm air-abraded tooth structure or etched enamel surfaces. RESULTS: The mean bond strength values recorded for Group 1 (phosphoric acid etch, 5 mm/min crosshead speed) was 25.4 MPa; Group 2 (phosphoric acid etch, 1 mm/min), 22.2 MPa; Group 3 (27 microm alumina at 4 mm distance), 16.8 MPa; Group 4 (50 microm alumina at 4 mm distance), 16.9 MPa; Group 5 (27 microm alumina at 20 mm distance), 4.2 MPa; and for Group 6 (50 microm alumina at 20 mm distance) 3.4 MPa. An analysis of variance (ANOVA) demonstrated significant differences among the groups, and a multiple comparison test (Tukey) demonstrated that conventionally etched specimens had a greater bond strength than air-abraded specimen groups. No significant difference in dye penetration could be demonstrated among the groups (p= 0.58). CONCLUSIONS: Composite resin applied to enamel surfaces prepared using an acid etch procedure exhibited higher bond strengths than those prepared with air abrasion technology. The abrasion particle size did not affect the bond strength produced, but the latter was adversely affected by the distance of the air abrasion nozzle from the enamel surface. The crosshead speed of the bond testing apparatus had no effect on the bond strengths recorded. The marginal seal of composite to prepared enamel was unaffected by the method of enamel preparation.     

Color stability and hardness in dental composites after accelerated aging.

OBJECTIVES: To investigate the color and microhardness changes of five chemically- and five light-curing composites as a function of accelerated aging from light exposure. MATERIALS AND METHODS: From each material five composite specimens were embedded in epoxy resin prior to determining the Knoop microhardness of the surface. For analyzing the color DeltaE*=f((L*a*b*)) with a spectrophotometer, three discs per composite were prepared. After measuring the baseline for hardness and color the same specimens were exposed to a xenon arc light and water in a Weather-Ometer machine for a total radiant energy of 150 kJ/m2 and 122 h. The microhardness and the color were again determined following the aging treatment. RESULTS: Each material showed a significant increase in hardness after aging treatment (p<0.05). Comparing the hardness changes (in %) of the light-cured materials with the chemically cured materials, no significant difference could be found. Perceptible color differences could be observed for all the materials. Three brands showed small differences with DeltaE*=1.6-2.2, while four composites had DeltaE* ranging from 6.2 to 15.5. A significant correlation between hardness values and color changes could not be established. CLINICAL SIGNIFICANCE: The findings suggest that, since light-curable materials showed significantly more resistance to color changes after accelerated aging by light and water than chemically-cured materials, they may be more esthetically acceptable. Color changes were not correlated with surface hardness changes of the materials after aging.     

The effect of disinfectants on the properties of dental gypsum: 1. Mechanical properties

PURPOSE: This study was conducted to evaluate the effect of selected disinfectants incorporated in the liquid of dental stones on material strength properties with the aim of developing a material with acceptable mechanical properties. MATERIALS AND METHODS: Two types of dental stone (types III and V) were mixed with aqueous solutions of 0.525% sodium hypochlorite, 0.1% and 10% povidone-iodine, and 2% glutaraldehyde, and with water as a control. The liquid/powder ratios recommended by the manufacturer were used. These materials were subjected to further modification by adding a mixture of 1.0% gum arabic and 0.132% calcium hydroxide to the hemihydrate powders before mixing with the disinfectant solutions at 2 different liquid/powder ratios for each. Both the regular and the modified materials were tested for compressive and diametral tensile strength after 1 hour and 1 week from the start of the mix. The structure of set materials was determined by scanning electron microscopy examination of fracture surfaces. RESULTS: The disinfectants often reduced the strength of both types of dental stone. However, using either 0.1% povidone-iodine or 0.525% sodium hypochlorite resulted in strength values comparable with that of the control. The addition of gum arabic and calcium hydroxide helped reduce the mixing liquid/powder ratios, improving the strength properties of the disinfected materials. CONCLUSIONS: Chemical disinfectants reduce the strength of dental gypsum when used as mixing water substitutes. Gum arabic and calcium hydroxide additives permit a lower liquid/powder ratio and can help offset this weakening.