Use of a dual lumen port for automated red cell exchange in adults with sickle cell disease

Red cell exchange (RCE) is a common procedure in adults with sickle cell disease (SCD). Implantable dual lumen Vortex (DLV) ports can be used for RCE in patients with poor peripheral venous access. We performed a retrospective cohort study of RCE procedures performed in adults with SCD. The main objective of the study was to compare the inlet speed, duration of procedures and rate of complications performed through DLV ports to those performed through temporary central venous and peripheral catheters. Twenty‐nine adults with SCD underwent a total of 318 RCE procedures. Twenty adults had DLV ports placed and 218 procedures were performed using DLV ports. Mean length of follow‐up after DLV port placement was 397 ± 263 days. Six DLV ports were removed due to infection and 1 for malfunction after a mean of 171 ± 120 days. Compared to temporary central venous and peripheral catheters, DLV port procedures had a greater rate of procedural complications, a longer duration, and a lower inlet speed (all P < 0.01). When accounting for the maximum allowable inlet speed to avoid citrate toxicity, 40% of DLV port procedures were greater than 10% below maximum speed, compared to 7 and 14% of procedures performed through temporary central venous and peripheral catheters (P < 0.0001). In conclusion, DLV ports can be used for RCE in adults with SCD, albeit with more procedural complications and longer duration. The smaller internal diameter and longer catheter of DLV ports compared to temporary central venous catheters likely accounts for the differences noted. J. Clin. Apheresis 30:353–358, 2015. © 2015 Wiley Periodicals, Inc.     

Heat Sink Effect on Tumor Ablation Characteristics as Observed in Monopolar Radiofrequency,Bipolar Radiofrequency,and Microwave,Using Ex Vivo Calf Liver Model

Thermal ablation of liver tumors near large blood vessels is affected by the cooling effect of blood flow, leading to incomplete ablation. Hence, we conducted a comparative investigation of heat sink effect in monopolar (MP) and bipolar (BP) radiofrequency ablation (RFA), and microwave (MW) ablation devices.With a perfused calf liver, the ablative performances (volume, mass, density, dimensions), with and without heat sink, were measured. Heat sink was present when the ablative tip of the probes were 8.0 mm close to a major hepatic vein and absent when >30 mm away. Temperatures (T1 and T2) on either side of the hepatic vein near the tip of the probes, heating probe temperature (T3), outlet perfusate temperature (T4), and ablation time were monitored.With or without heat sink, BP radiofrequency ablated a larger volume and mass, compared with MP RFA or MW ablation, with latter device producing the highest density of tissue ablated. MW ablation produced an ellipsoidal shape while radiofrequency devices produced spheres.Percentage heat sink effect in Bipolar radiofrequency : Mono-polar radiofrequency : Microwave was (Volume) 33:41:22; (mass) 23:56:34; (density) 9.0:26:18; and (relative elipscity) 5.8:12.9:1.3, indicating that BP and MW devices were less affected.Percentage heat sink effect on time (minutes) to reach maximum temperature (W) = 13.28:9.2:29.8; time at maximum temperature (X) is 87:66:16.66; temperature difference (Y) between the thermal probes (T3) and the temperature (T1 + T2)/2 on either side of the hepatic vessel was 100:87:20; and temperature difference between the (T1 + T2)/2 and temperature of outlet circulating solution (T4), Z was 20.33:30.23:37.5.MW and BP radiofrequencies were less affected by heat sink while MP RFA was the most affected. With a single ablation, BP radiofrequency ablated a larger volume and mass regardless of heat sink.     

A new approach to prevent HIV transmission: Project Protect intervention for recently infected individuals

Past research suggests that as many as 50% of onward human immunodeficiency virus (HIV) transmissions occur during acute and recent HIV infection. It is clearly important to develop interventions which focus on this highly infectious stage of HIV infection to prevent further transmission in the risk networks of acutely and recently infected individuals. Project Protect tries to find recently and acutely infected individuals and prevents HIV transmission in their risk networks. Participants are recruited by community health outreach workers at community-based HIV testing sites and drug users' community venues, by coupon referrals and through referrals from AIDS clinics. When a network with acute/recent infection is identified, network members are interviewed about their risky behaviors, network information is collected, and blood is drawn for HIV testing. Participants are also educated and given prevention materials (condoms, syringes, educational materials); HIV-infected participants are referred to AIDS clinics and are assisted with access to care. Community alerts about elevated risk of HIV transmission are distributed within the risk networks of recently infected. Overall, 342 people were recruited to the project and screened for acute/recent HIV infection. Only six index cases of recent infection (2.3% of all people screened) were found through primary screening at voluntary counseling and testing (VCT) sites, but six cases of recent infection were found through contact tracing of these recently infected participants (7% of network members who came to the interview). Combining screening at VCT sites and contact tracing the number of recently infected people we located as compared to VCT screening alone. No adverse events were encountered. These first results provide evidence for the theory behind the intervention, i.e., in the risk networks of recently infected people there are other people with recent HIV infection and they can be successfully located without increasing stigma for project participants.     

Simeprevir added to peginterferon and ribavirin lessens time with fatigue,depressive symptoms and functional limitations in patients with chronic hepatitis C compared with peginterferon and ribavirin: results from 1161 patients in the QUEST‐1, QUEST‐2 and PROMISE studies

The value of adding simeprevir (SMV) vs placebo (PBO) to peginterferon and ribavirin (PR) for treatment of chronic hepatitis C virus infection was examined using patient‐reported outcomes (PROs); further, concordance of PROs with virology endpoints and adverse events (AEs) was explored. Patients (n = 768 SMV/PR, n = 393 PBO/PR) rated fatigue (FSS), depressive symptoms (CES‐D) and functional impairment (WPAI: Hepatitis C Productivity, Daily Activity and Absenteeism) at baseline and throughout treatment in three randomised, double‐blind trials comparing the addition of SMV or PBO during initial 12 weeks of PR. PR was administered for 48 weeks (PBO group) and 24/48 weeks (SMV group) using a response‐guided therapy (RGT) approach. Mean PRO scores (except Absenteeism) worsened from baseline to Week 4 to the same extent in both groups but reverted after Week 24 for SMV/PR and only after Week 48 for PBO/PR. Accordingly, there was a significantly lower area under the curve (baseline–Week 60, AUC₆₀) and fewer weeks with clinically important worsening of scores in the SMV/PR group at any time point. Incidences of patients with fatigue and anaemia AEs were similar in both groups, but FSS scores showed that clinically important increases in fatigue lasted a mean of 6.9 weeks longer with PBO/PR (P < 0.001). PRO score subgroup analysis indicated better outcomes for patients who met the criteria for RGT or achieved sustained virological response 12 weeks post‐treatment (SVR12); differences in mean PRO scores associated with fibrosis level were only observed with PBO/PR. Greater efficacy of SMV/PR enabled reduced treatment duration and reduced time with PR‐related AEs without adding to AE severity.     

A Stacked Generalization of 3D Orthogonal Deep Learning Convolutional Neural Networks for Improved Detection of White Matter Hyperintensities in 3D FLAIR Images

BACKGROUND AND PURPOSE:Accurate and reliable detection of white matter hyperintensities and their volume quantification can provide valuable clinical information to assess neurologic disease progression. In this work, a stacked generalization ensemble of orthogonal 3D convolutional neural networks, StackGen-Net, is explored for improving automated detection of white matter hyperintensities in 3D T2-FLAIR images.MATERIALS AND METHODS:Individual convolutional neural networks in StackGen-Net were trained on 2.5D patches from orthogonal reformatting of 3D-FLAIR (n = 21) to yield white matter hyperintensity posteriors. A meta convolutional neural network was trained to learn the functional mapping from orthogonal white matter hyperintensity posteriors to the final white matter hyperintensity prediction. The impact of training data and architecture choices on white matter hyperintensity segmentation performance was systematically evaluated on a test cohort (n = 9). The segmentation performance of StackGen-Net was compared with state-of-the-art convolutional neural network techniques on an independent test cohort from the Alzheimer’s Disease Neuroimaging Initiative-3 (n = 20).RESULTS:StackGen-Net outperformed individual convolutional neural networks in the ensemble and their combination using averaging or majority voting. In a comparison with state-of-the-art white matter hyperintensity segmentation techniques, StackGen-Net achieved a significantly higher Dice score (0.76 [SD, 0.08], F1-lesion (0.74 [SD, 0.13]), and area under precision-recall curve (0.84 [SD, 0.09]), and the lowest absolute volume difference (13.3% [SD, 9.1%]). StackGen-Net performance in Dice scores (median = 0.74) did not significantly differ (P = .22) from interobserver (median = 0.73) variability between 2 experienced neuroradiologists. We found no significant difference (P = .15) in white matter hyperintensity lesion volumes from StackGen-Net predictions and ground truth annotations.CONCLUSIONS:A stacked generalization of convolutional neural networks, utilizing multiplanar lesion information using 2.5D spatial context, greatly improved the segmentation performance of StackGen-Net compared with traditional ensemble techniques and some state-of-the-art deep learning models for 3D-FLAIR.

White matter hyperintensities (WMHs) correspond to pathologic features of axonal degeneration, demyelination, and gliosis observed within cerebral white matter.¹ Clinically, the extent of WMHs in the brain has been associated with cognitive impairment, Alzheimer’s disease and vascular dementia, and increased risk of stroke.^2,3 The detection and quantification of WMH volumes to monitor lesion burden evolution and its correlation with clinical outcomes have been of interest in clinical research.^4,5 Although the extent of WMHs can be visually scored,⁶ the categoric nature of such scoring systems makes quantitative evaluation of disease progression difficult. Manually segmenting WMHs is tedious, prone to inter- and intraobserver variability, and is, in most cases, impractical. Thus, there is an increased interest in developing fast, accurate, and reliable computer-aided automated techniques for WMH segmentation.Convolutional neural network (CNN)-based approaches have been successful in several semantic segmentation tasks in medical imaging.⁷ Recent works have proposed using deep learning–based methods for segmenting WMHs using 2D-FLAIR images.^8-11 More recently, a WMH segmentation challenge¹² was also organized (http://wmh.isi.uu.nl/) to facilitate comparison of automated segmentation of WMHs of presumed vascular origin in 2D multislice T2-FLAIR images. Architectures that used an ensemble of separately trained CNNs showed promising results in this challenge, with 3 of the top 5 winners using ensemble-based techniques.¹²Conventional 2D-FLAIR images are typically acquired with thick slices (3–4 mm) and possible slice gaps. Partial volume effects from a thick slice are likely to affect the detection of smaller lesions, both in-plane and out-of-plane. 3D-FLAIR images, with isotropic resolution, have been shown to achieve higher resolution and contrast-to-noise ratio¹³ and have shown promising results in MS lesion detection using 3D CNNs.¹⁴ Additionally, the isotropic resolution enables viewing and evaluation of the images in multiple planes. This multiplanar reformatting of 3D-FLAIR without the use of interpolating kernels is only possible due to the isotropic nature of the acquisition. Network architectures that use information from the 3 orthogonal views have been explored in recent works for CNN-based segmentation of 3D MR imaging data.¹⁵ The use of data from multiple planes allows more spatial context during training without the computational burden associated with full 3D training.¹⁶ The use of 3 orthogonal views simultaneously mirrors how humans approach this segmentation task.Ensembles of CNNs have been shown to average away the variances in the solution and the choice of model- and configuration-specific behaviors of CNNs.¹⁷ Traditionally, the solutions from these separately trained CNNs are combined by averaging or using a majority consensus. In this work, we propose the use of a stacked generalization framework (StackGen-Net) for combining multiplanar lesion information from 3D CNN ensembles to improve the detection of WMH lesions in 3D-FLAIR. A stacked generalization¹⁸ framework learns to combine solutions from individual CNNs in the ensemble. We systematically evaluated the performance of this framework and compared it with traditional ensemble techniques, such as averaging or majority voting, and state-of-the-art deep learning techniques.