Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Effects of Price,Information, and Transactions Cost Interventions to Raise Voluntary Enrollment in a Social Health Insurance Scheme: A Randomized Experiment in the Philippines

A cluster randomized experiment was undertaken testing two sets of interventions encouraging enrollment in the Individually Paying Program (IPP), the voluntary component of the Philippines' social health insurance program. In early 2011, 1037 unenrolled IPP‐eligible families in 179 randomly selected intervention municipalities were given an information kit and offered a 50% premium subsidy valid until the end of 2011; 383 IPP‐eligible families in 64 control municipalities were not. In February 2012, the 787 families in the intervention sites who were still IPP‐eligible but had not enrolled had their vouchers extended, were resent the enrollment kits and received SMS reminders. Half the group also received a ‘handholding’ intervention: in the endline interview, the enumerator offered to help complete the enrollment form, deliver it to the insurer's office in the provincial capital, and mail the membership cards. The main intervention raised the enrollment rate by 3 percentage points (ppts) (p = 0.11), with an 8 ppt larger effect (p < 0.01) among city‐dwellers, consistent with travel time to the insurance office affecting enrollment. The handholding intervention raised enrollment by 29 ppts (p < 0.01), with a smaller effect (p < 0.01) among city‐dwellers, likely because of shorter travel times, and higher education levels facilitating unaided completion of the enrollment form. Copyright © The World Bank Health Economics © 2015 John Wiley & Sons, Ltd.     

Sources of Variability in the Detection of Cerebral Emboli with Transcranial Doppler During Cardiac Surgery

OBJECTIVE: The application of intensity thresholds for embolus detection with transcranial Doppler (TCD) can exclude from analysis an unrecognized proportion of high-intensity transient signals (HITS))whose intensities are below the threshold. The lack of consistent threshold criteria between clinical trials may explain part of the discrepancy in the reported HITS counts. We investigated the effect of choosing different thresholds on the sensitivity and specificity of detecting HITS during cardiopulmonary bypass (CPB). METHODS: Two observers independently analyzed TCD recordings from 8 patients under CPB. Doppler signals were classified as true HITS, equivocal HITS, artifacts, and Doppler speckles according to preestablished criteria. The relative intensity of Doppler signals was measured by two different methods (TCD software vs manual). Receiver Operating Characteristic curves determined the optimal threshold for each of the two intensity methods. RESULTS: Reviewers achieved agreement in 96% of 2190 Doppler signals (kappa = 0.90). Relative intensities calculated with the TCD-software method were 3 dB (95% CI: 3.0-3.4) higher than the manual method. The optimal threshold was found at 10 dB (sensitivity: 99%; specificity: 90.8%) with the software method and at 7 dB with the manual method (sensitivity: 96%; specificity: 83%). The use of an intensity threshold 2 dB higher than the optimal increased the rejection of true HITS by 8% and 14%, respectively. CONCLUSIONS: Using intensity thresholds higher than the optimal for embolus detection decreases HITS counts. Choosing a threshold depends on the type of method used for measuring the signal intensity. Uniform threshold criteria and comparative studies between different Doppler devices are necessary for making clinical trials more comparable.