Osteoporosis and Osseointegration of Implants

According to medical literature, osteoporosis and related bone pathologies are increasing in epidemic proportions. The exact etiology of the disease is unknown, but hormonal, dietary, and genetic factors all contribute to the related loss of bone density. In the disease process, bone loss occurs throughout the body. Research indicates that the mandible and maxilla are affected, and show oral manifestations. There is no scientific data to contraindicate the use of two-step osseointegrated implants in osteoporotic individuals. The purpose of this article is to review the literature regarding osteoporosis and its relationship to oral bone loss.     

Prevalence of Nontraditional Dental Hygiene Practice

There is little knowledge of the number or the work characteristics of dental hygienists outside the private-practice setting. This survey was conducted to determine the percentage of hygienists practicing in nontraditional (nonprivate-practice) settings and the types of settings in which they are employed. Mail questionnaires were returned from a total of 21,847 (56.9%) of the hygienists in the survey sample. The percentage of active hygienists practicing in nontraditional settings was 11.8. Dental or dental hygiene schools, and government and nongovernment-supported clinics were the most frequent nontraditional practice settings. State supervision requirements were found to be associated significantly with the prevalence of nontraditional hygiene practice.     

Effects of preservation on the osteoinductive capacity of demineralized bone powder allografts

Demineralized bone powder (DBP) has repeatedly been shown to serve as an osteoinductive material. The aim of this study was to investigate the effects of different methods of storage of DBP on its osteoinductive property. Forty-five Long Evan rats were used in this study. Twenty rats were used as donors; the diaphyses of their femoral bones were used for the preparation of DBP. The DBP was divided into four portions that were either lyophilized or frozen at -70 degrees C, -4 degrees C, or kept at room temperature (25 degrees C). All samples were stored under the specified condition for six months. At the time of implantation, fresh DBP was prepared and used as a control. Twenty-five rats were divided equally into five groups. Each group received an implant of either one of the differently preserved and stored samples of DBP or fresh DBP. The animals were killed 60 days following implantation. The implants were excised and processed to obtain 5 micron thick decalcified sections and 3 micron thick undecalcified sections. Semicomputerized histomorphometry was used for the quantification of the newly-formed bone in each implant. Newly-formed bone was detected in all experimental and control groups and there were no statistically significant differences between the various groups. It was concluded that DBP retains its osteoinductivity after lyophilization or preservation at -70 degrees C, -4 degrees C, and 25 degrees C for a period of up to six months, and that the different methods of preservation did not significantly affect the amount of the induced newly-formed bone.(ABSTRACT TRUNCATED AT 250 WORDS)     

The Effect of Gingival Retraction Procedures on Periodontal Indices and Crevicular Fluid Cytokine Levels: A Pilot Study

PURPOSE: The purpose of this study was to examine the effects of placement of retraction cord subgingivally upon periodontal indices including plaque index (PI), gingival index (GI), pocket depth (PD), bleeding on probing (BOP), and attachment level (AL), as well as gingival crevicular fluid (GCF) and TNF-alpha levels. METHODS: Ten teeth in 6 patients who were periodontally healthy were selected. These teeth had pocket depths of 3 mm or less, no evidence of significant loss of attachment, BOP, or plaque accumulation. The patients each received an oral prophylaxis. The following week, baseline measurements of periodontal indices and TNF-alpha were taken and the retraction cord was placed for 15 minutes. Following removal, the patients were dismissed. The periodontal indices measured included PI, GI, PD, BOP, and AL. In addition, the levels of TNF-alpha in GCF, were investigated. These measurements were made before gingival retraction as a baseline and on the 1st, 3rd, 7th, 14th, and 28th days post retraction. RESULTS: A repeated measures ANOVA showed that TNF-alpha levels in GCF were significantly increased at all five intervals after gingival retraction compared to the baseline. The mean TNF-alpha level peaked at Day 1 (0.90 +/- 0.62), then declined at Days 3 (0.53 +/- 0.16), 7 (0.43 +/- 0.08), 14 (0.47 +/- 0.10), and 28 (0.43 +/- 0.08) but was still elevated 54% above baseline at Day 28, p < 0.01. The GI was significantly elevated at Day 1 (0.9 +/- 0.49), p < 0.01; Day 3 (0.53 +/- 0.32); and Day 7 (0.33 +/- 0.33), p < 0.05. Unlike TNF-alpha, GI recovered to the baseline by day 14. Other periodontal parameters, PI, PD, BOP, and AL were not significantly altered by the gingival retraction procedure. CONCLUSION: This pilot study supports the previous research that gingival retraction causes an acute injury that heals clinically in 2 weeks as is indicated by the GI. It also provides the first evidence that gingival retraction results in an elevation of the proinflammatory cytokine, TNF-alpha, in GCF.     

Effect of opacifiers on color stability of pigmented maxillofacial silicone A-2186 subjected to artificial aging

PURPOSE: This study was designed to determine the effect of opacifiers used at different ratios on the color stability of pigmented A-2186 silicone maxillofacial elastomers and to evaluate the color spectrophotometrically before and after artificial aging. MATERIALS AND METHODS: Sixty experimental groups of elastomers were made using various concentrations (5%, 10%, and 15%) of 4 opacifiers (Georgia kaolin powder neutral, kaolin powder calcined, Artskin white, and dry pigment titanium white) with 1 of 5 dry earth cosmetic pigment groups (no pigment [control], red, yellow ochre, burnt sienna, and a mixture of all pigments). Five specimens of each elastomer were tested, for a total of 300 specimens. All specimens were placed in an aging chamber and artificially aged by exposure to light, water spray, fluctuating temperatures, and humidity. CIE L*a*b* values were measured by spectrophotometer. The color differences (Delta E*) at various exposure energies (150, 300, and 450 kJ/m(2)) were subjected to 4-way analysis of variance with repeated measures (super ANOVA). Mean values were compared with Tukey-Kramer intervals calculated at the 0.05 significance level. RESULTS: The trained human eye can detect color changes (Delta E*) greater than 1.0. Adding all pigments to any of the kaolin groups did not protect silicone A-2186 from color degradation over time. Mixing red pigment in all groups at all times drastically increased DeltaE* values ranging from 0.1 to 1.3 up to 16.6 to 49.6. Yellow ochre had an effect only with 10% and 15% concentrations of kaolin powder calcined, increasing the value of Delta E* to greater than 1.0. Burnt sienna had an effect only with a 15% concentration of kaolin powder calcined, increasing the value of Delta E* at 300 and 450 kJ/m(2) to greater than 11.0. At the 5% concentration, kaolin powder calcined had the smallest color changes, followed by, in order, dry pigment titanium white, Artskin white, and Georgia kaolin. At the 10% concentration, Artskin white had the smallest color changes, followed by, in order, dry pigment titanium white, kaolin powder calcined, and Georgia kaolin. At the 15% concentration, Artskin white again had the smallest color changes, followed by, in order, dry pigment titanium white, Georgia kaolin, and the kaolin powder calcined. The smallest color changes in each kaolin group were at the 10% concentration for Artskin white, dry pigment titanium white, and kaolin powder calcined and at the 5% concentration for Georgia kaolin. CONCLUSIONS: Mixing dry earth cosmetic pigments with opacifiers did not protect silicone A-2186 from color degradation over time, especially in the case of red pigment. The group in which pigments were mixed with 10% Artskin white had the smallest color changes over time, followed by, in order, the groups in which pigments were mixed with 10% dry pigment titanium white, 10% kaolin powder calcined, and 5% Georgia kaolin. Red pigment had a significant effect on all opacifiers, especially Georgia kaolin and kaolin powder calcined. Yellow ochre and burnt sienna had an effect only on 15% kaolin powder calcined. Among all the pigment groups tested, yellow ochre remained the most color stable over time.     

A Survey of U.S. Prosthodontists and Dental Schools on the Current Materials and Methods for Final Impressions for Complete Denture Prosthodontics

PURPOSE: The purpose of this study was to survey members of The American College of Prosthodontists (ACP) to evaluate current materials and methods for final impressions for complete denture prosthodontics in the United States. In addition, those methods were compared with methods and materials taught in U.S. dental schools via a second survey sent to the chairpersons of prosthodontic/restorative departments. MATERIALS AND METHODS: An anonymous questionnaire was mailed to all 1762 active ACP members in the United States in 2003. A slightly modified questionnaire was also distributed to chairpersons of prosthodontic/restorative departments in the 54 U.S. dental schools. Data analysis was performed via frequency distribution and chi-square statistics. RESULTS: Nine hundred and forty-five questionnaires were returned by members of the ACP (54% return rate) and 42 questionnaires were returned by the U.S. dental schools (78% return rate). The majority of the reporting prosthodontists (88%) and dental schools (98%) use a border-molded custom tray for final impressions for complete denture prosthodontics. The most popular material for border molding was plastic modeling compound (67% of reporting ACP members, and 95% of the responding dental schools). Variability of the materials used for final impressions was observed, with the most popular materials being polyvinylsiloxane for the ACP members (36%) and polysulfide for the dental schools (64%). Statistically significant differences were found in the materials used for border molding by prosthodontists based on the time elapsed since completion of prosthodontic training. No differences were found in the materials used for impression of edentulous arches based on years of experience. Geographic location did not influence the materials and methods used by prosthodontists for complete denture final impressions. CONCLUSIONS: There was variability of the materials and techniques used for final impressions by ACP members and dental schools; however, overall there was an agreement on the materials and techniques used by prosthodontists and dental schools. Distinct trends for increasing use of polyvinylsiloxane and polyether for border molding procedures and impressions of edentulous arches were observed both in members of the ACP and in the U.S. dental schools.     

Predoctoral Fixed Prosthodontics Curriculum Survey

Purpose In 1996, a survey of American dental schools was conducted. The purpose of the survey was to determine the curricular structure, techniques taught, and materials used in predoctoral fixed prosthodontics courses. Materials and Methods The survey was mailed to the course directors of predoctoral fixed prosthodontic programs at 53 American dental schools. Of these, 42 schools returned the completed survey, resulting in a response rate of 79%. The mean, median, and the range of responses were computed where applicable. Results The results from this survey show that the mean student-to-faculty ratio in the preclinical course was 11:1, with a median of 10:1 and a range of 5:1 to 25:1. The mean number of laboratory clock hours was 164, with a median of 148 and a range of 81 to 288. The mean number of lecture hours reported was 42, with a median of 35 and a range of 20 to 80. Fifty-five percent of the schools used the Hanau semiadjustable articulator. The most commonly used provisional technique was the thermoplastic custom external surface form (44%). The finish line of choice for the full metal restoration was the chamfer placed circumferentially (74%). The finish line of choice for the porcelain-fused-to-metal restoration was the shoulder placed facially and the chamfer placed lingually (38%). Conclusions Predoctoral fixed prosthodontics education and technical experience varies from school to school, yet a large percentage of schools agree on certain topics.     

A Critique of Topical Fluoride Methods (Dentifrices, Mouthrinses, Operator-, and Self-applied Gels) in an Era of Decreased Caries and Increased Fluorosis Prevalence

Within the last 20 years there has been a decrease in the caries prevalence of US schoolchildren, a change in the intraoral caries pattern, and a slowing of the progress of lesions. Simultaneously, the prevalence of enamel milder, cosmetically acceptable forms and is more noticeable in fluoride-deficient communities than those with optimal or above-optimal water fluoride concentrations. Circumstantial evidence indicates that a principal contributor to the caries decline is the extensive use of fluoride dentifrices. Conversely, although use of a fluoride dentifrice can add to the total daily amount of ingested fluoride in preschool children, there is little evidence to suggest that dentifrice ingestion is a principal factor causing the fluorosis increase. The value of fluoride methods may be assessed in relative or absolute terms. The relative, or percentage, caries reduction attributed to fluoride mouthrinses and gels appears to be a property intrinsic to the methods themselves and generally is little affected by the caries activity of the population being treated. Conversely, the absolute, or numerical, caries reduction is dependent upon the level of disease in the population. Thus, the reported caries decline reduces the number of surfaces prevented from developing caries, even though the percentage reduction remains substantially unchanged. Although inadvertent ingestion of fluoride can result from the use of mouthrinses and gels, there is little evidence to suggest that they have contributed to the fluorosis increase. When using topical methods, prudence should prevail to avoid ingestion of fluoride. Fluoride dentifrices should continue to be used routinely, and although lower potency dentifrices may be considered, the literature does not provide strong support for their need. Use of fluoride mouthrinses and gels for individual patients should be predicted upon their caries activity or risk. Use of these methods in public health programs is a matter of cost-effectiveness, which will be influenced by the caries prevalence of the target population.