Trace Element Contents in Petrol-Contaminated Soil Following the Application of Compost and Mineral Materials

The global use of petroleum hydrocarbons as raw materials and an energy source in industry results in serious environmental, health, and ecological problems. Consequently, there is growing interest in the development of technologies for the rehabilitation of contaminated areas. This study was undertaken in order to determine the effect of different phytostabilising materials (compost, bentonite, and CaO) on the trace element content in soil contaminated with unleaded petroleum 95 (0, 2.5, 5, and 10 cm³ kg⁻¹ of soil). The doses of petroleum applied to the soil were based on the previously conducted preliminary experiment. The highest petroleum dose (10 cm³ kg⁻¹ of soil) significantly reduced the chromium, zinc, and cobalt contents in the soil. Petroleum increased the cadmium, lead, nickel, and copper contents in the soil. The materials used for phytostabilisation (compost, bentonite, calcium oxide) had a significant effect on the trace element content in the soil. The application of mineral materials (bentonite and calcium oxide) was more effective than the application of compost, compared to the control series (without soil amendments) as they reduced the contents of cadmium, chromium, nickel, and cobalt in the soil to the greatest extent. The reduction effect of bentonite and calcium oxide on the content of these trace elements in the soil was stronger than compost.     

Assessment of fetal circulation in the late first trimester--preliminary study

OBJECTIVES: to confirm that fetal echocardiography is indeed possible in late first trimester and that it improves the standard of the so-called "genetic" ultrasound scan. MATERIAL AND METHODS: Early echocardiography was performed in 75 fetuses from high and low risk pregnancies. All fetuses underwent echocardiography examination in 18-22 weeks of gestation and established follow up. RESULTS: The most suitable method of visualization seems to be transabdominal examination, between 13.0-13.6 weeks of gestation, an transvaginal one, between 12.0-12.6 weeks of gestation, with 90% effectiveness. In researched group of 75 fetuses (with established follow up) there were four heart defects (5.3%). Three of them were diagnosed before 14th week of gestation. One case (tetralogy of Fallot) was overlooked. There were two false positive diagnosis verified at 20th week of gestation. CONCLUSIONS: Early echocardiography, especially between 12.0-13.6 weeks of gestation, is a possible and valuable method of diagnosis. Reference evaluation should be performed between 18 and 22 weeks of gestation. In cases with suspected anomalies karyotyping is recommended. Congenital heart disease diagnosed at late first trimester should be treated as the next potential marker of genetic disorder.     

Über den Einfluss Grosser Dosen von Lactoflavin im Tierexperiment

Ohne Zusammenfassung     

Analysis of Dietary Habits and Nutritional Status of Children with Down Syndrome in the Context of Lipid and Oxidative Stress Parameters

Introduction: The risk of obesity in children with Down syndrome is high. Undoubtedly, proper nutrition plays an important role in the prevention of excess body weight and is associated with a reduction of metabolic complications. The aim of the study was to assess the problem of disturbances in the nutritional status and eating habits of children with DS. Methods: A total of 39 patients were included in the study. The nutritional status was assessed by anthropometric tests and Dual X-ray Absorptiometry. Eating habits were assessed using the Child Eating Behavior Questionnaire and the Food Frequency Questionnaire. Blood samples were taken to determine the oxidative stress and lipid parameters. Results: Obesity was recognized in 15% of subjects and 23% were overweight. Children that were overweight were characterized by higher levels of triglycerides, atherogenic index of plasma, and apoA2 and apoE levels. Fat mass, fat mass/height² index, and visceral fat mass correlated with thiobarbituric acid reactive substances and advanced oxidative protein product level. The analysis of the Child Eating Behavior Questionnaire showed that children struggling with being overweight were more interested in food compared to those with normal body weight. A positive correlation was identified between waist circumference and food interest categories. Insufficient consumption of dairy products, vegetables, whole grain products, as well as fruits, seeds, nuts, and fatty fish was noted. Patients were less likely to consume products that are a good source of mono- and polyunsaturated fatty acids. Conclusions: In children with Down syndrome and obesity, disturbances in lipid and oxidative stress parameters are observed. Abnormal eating habits in all children with Down syndrome regardless of their nutritional status were noted. Proper nutritional education, nutritional control, and management of metabolic problems are essential in this group of patients.     

GL Beams Reinforced with Plywood in the Outer Layer

Glulam beams are increasingly used in the construction industry because of their high strength and the possibility of using round timber with smaller cross-sections. The load-bearing capacity of beams is strongly related to the quality of the outer layers and, in the case of wood, especially the tension zones. For these reasons, this study decided to replace the outer lamella with tensile plywood. The produced beams were subjected to static bending strength and modulus of elasticity evaluation. It was shown that the best static bending strength values were obtained for beams containing plywood in the tension layer. However, the change in structure in the tension zone of beams made of glued laminated timber results not only in an increase in the load capacity of elements produced in this way but also in a decrease in the range/range of the obtained results of bending strength. This way of modifying the construction of glued laminated beams allows a more rational use of available pine timber.     

Permeability and Load Capacity of Iron Porous Bearings with the Addition of Hexagonal Boron Nitride

Due to their properties, porous sliding bearings are considered to be maintenance-free, which means that no lubrication is required during operation. Their design enables operation at low rotational speeds with high load. Another effect of this bearing design is the lubrication continuity in the tribological pair. In this study, the selected tribological properties (such as load capacity and permeability) of new-generation iron porous bearings with boron nitride powder were experimentally investigated. Tests were carried out under various conditions, using unique test apparatus. The addition of 3% (weight) of hexagonal boron nitride (hBN) significantly increased the load capacity of tested porous bearings in comparison to the same standard bearings containing 2.5% copper. The obtained p_gr·v rating reached almost 7 MPa, which is a value almost three times higher than the requirements for this type of bearing. It is worth emphasizing that such a result was obtained despite a noticeable deterioration in the air and oil permeability of the bearing.     

Thresholding Methods for Reduction in Data Processing Errors in the Laser-Textured Surface Topography Measurements

There are many factors influencing the accuracy of surface topography measurement results: one of them is the vibrations caused by the high-frequency noise occurrence. It is extremely difficult to extract results defined as noise from the real measured data, especially the application of various methods requiring skilled users and, additionally, the improper use of software may cause errors in the data processing. Accordingly, various thresholding methods for the minimization of errors in the raw surface topography data processing were proposed and compared with commonly used (available in the commercial software) techniques. Applied procedures were used for the minimization of errors in the surface topography parameters (from ISO 25178 standard) calculation after the removal and reduction, respectively, of the high-frequency noise (S-filter). Methods were applied for analysis of the laser-textured surfaces with a comparison of many regular methods, proposed previously in the commercial measuring equipment. It was found that the application of commonly used algorithms can be suitable for the processing of the measured data when selected procedures are provided. Moreover, errors in both the measurement process and the data processing can be reduced when thresholding methods support regular algorithms and procedures. From applied, commonly used methods (regular Gaussian regression filter, robust Gaussian regression filter, spline filter and fast Fourier transform filter), the most encouraging results were obtained for high-frequency noise reduction in laser-textured details when the fast Fourier transform filter was supported by a thresholding approach.