High-Resolution Melting Assay (HRMA) is a Simple and Sensitive Stool-Based DNA Test for the Detection of Mutations in Colorectal Neoplasms

BackgroundStool-based DNA testing for colorectal cancer is becoming a favored alternative to existing DNA screening tests. However, current methods of analysis often become more complicated and costly with increased sensitivity. The high-resolution melting assay (HRMA) is a simple and rapid mutation scanning method with low cost and superb accuracy. In this study, we verified the accuracy of HRMA for screening KRAS/TP53 mutations in stool-isolated DNA from patients with colorectal cancer.Materials and MethodsComparing to direct DNA sequencing, the accuracy of HRMA was verified by detecting KRAS/TP53 mutations in 2 independent stages. In study stage I, both tissue and stool samples from colorectal neoplasm patients were analyzed. In study stage II, stool samples from patients with colorectal neoplasms, and normal controls in clinical screening settings were examined.ResultsIn study stage I, the HRMA identified 14 of 17 target mutations (82.4%) in stools from cancer patients, and 4 of 5 (80.0%) target mutations in stools from advanced adenoma patients. The mutation detection rate in fecal samples (45.0%; 18/40) and referred tissue samples (55.0%; 22/40) was highly consistent (κ = 0.79). The HRMA detected 1% mutant DNA in a background of wild type DNA. In study stage II, the HRMA assay detected 58.8% (20/34) mutations in tumor samples, 41.5% (17/41) in advanced adenomas samples, and 3.33% (2/60) in age-matched normal control samples. The results from HRMA and DNA sequencing revealed 100% sensitivity and specificity in both tissue and stool samples.ConclusionHRMA is a simple, reliable, and sensitive method for detecting DNA mutations in the stool samples from patients with colorectal neoplasms.     

MicroRNA-503 targets FGF2 and VEGFA and inhibits tumor angiogenesis and growth

FGF2 and VEGFA are the two most potent angiogenic factors. Here we report that miR-503 can simultaneously down-regulate FGF2 and VEGFA. The expression of miR-503 is repressed in HCC cells and primary tumors due to a potential epigenetic mechanism. Overexpression of miR-503 reduced tumor angiogenesis in vitro and in vivo. We also found that miR-503 expression was down-regulated by hypoxia through HIF1α. These results identify a miRNA that targets both FGF2 and VEGFA in cancers, demonstrate the anti-angiogenesis role of miR-503 in tumorigenesis, and provide a novel mechanism for hypoxia-induced FGF2 and VEGFA through HIF1α-mediated inhibition of miR-503.     

The role of tryptophan metabolism in postpartum depression

The Postpartum depression (PPD) is the most common postpartum psychiatric disorder, afflicting approximately 10%–20% of new mothers. Clinical symptoms of the PPD include depressive disorder, agitation, insomnia, anxiety and confusion, resulting in an increase in suicidal tendencies, thereby having significant impacts on the puerpera, newborn and their family. A growing body of data indicate a role for alterations in tryptophan metabolism in the PPD. The metabolism of tryptophan produces an array of crucial factors that can differentially regulate key physiological processes linked to the PPD. Importantly, an increase in stress hormones and immune-inflammatory activity drives tryptophan to the production of neuroregulatory kynurenine pathway products and away from the serotonin and melatonin pathways. This links the PPD to other disorders of depressed mood, which are classically associated with decreased serotonin and melatonin, coupled to increases in kynurenine pathway products. Several kynurenine pathway products, such as kynurenic acid and quinolinic acid, can have neuroregulatory effects, with consequences pathological underpinnings of the PPD. The current article reviews the role of alterations in tryptophan metabolism in the PPD.     

Influence Factors and Prediction Model of Bond Strength of Tunnel Fireproof Coating under Freeze–Thaw Cycles

The freeze–thaw resistant performance of a tunnel fireproof coating (TFC) has an important impact on bonding property and durability. The influence of redispersible emulsion powder, polypropylene fiber and air-entraining agent on TFCs was studied. Transverse fundamental frequency and ultrasonic sound velocity were used to evaluate the damage degree of TFC, and the mechanism was revealed by SEM and pore structure. The results show that the most beneficial effect on bond strength of TFC is redispersible emulsion powder, followed by air-entraining agent, and then polypropylene fiber. After freeze–thaw cycles, the cumulative pore volume of micropores in the TFC increases obviously, while the porosity of macropores does not change significantly. A prediction model was proposed, which can calculate the bond strength from the damage degree of TFC under freeze–thaw cycles. The achievement can promote the application of TFC in cold regions.     

Two new polyprenylated acylphloroglucinols from Hypericum scabrum

Two new polyprenylated acylphloroglucinols, (1S,32R,5S,6R,7R)-6-((R)-3,4-di-hydroxy-4-methylpentyl)-2-(2-hydroxypropan-2-yl)-7-isobutyryl-6-methyl-5,9-bis(3-methylbut-2-en-1-yl)-4,5,6,7-tetrahydro-2H-32,7-methanocycloocta[b]furan-8,10(3H)-dione (1) and (4R,5R,7R)-4-((R)-3,4-dihydroxy-4-methylpentyl)-2,2,4-trimethyl-5,7-bis(3-methyl-but-2-en-1-yl)-7-(5-methylhex-4-enoyl)-4,5,6,7-tetrahydrobenzofuran-3(2H)-one (2) were isolated from Hypericum scabrum. The structures were elucidated by means of spectroscopic methods, including MS, IR, NMR, OR, and CD.     

Lipid-rich Carcinoma of the Breast: a Case Report

Lipid-rich carcinoma is a rare variant and accounts for < 2% of all breast cancer diagnoses. We report a case occurring in a 53-year-old female. The patient presented with a painless, right breast mass. Clinical examination and mammography suggested malignancy. Subsequent modified radical mastectomy revealed the diagnosis of lipid-rich carcinoma. The morphological features, differential diagnosis and treatment along with a brief review of the literature are discussed in this article.

Lipid-rich carcinoma (L-RC) is a very rare variant of breast carcinomas with an aggressive clinical course and poor prognosis. It presents only 1% to 2% of all breast cases (1,2). It is classified as a specific variety of mammary carcinoma because the tumour cells possess abundant vacuolated cytoplasm which is strongly positive when stained for neutral fat. Aboumrad (2) first described it in 1963 as lipid-secreting carcinoma. However, Ramos and Taylor (1) renamed it as lipid-rich breast carcinoma. In China, the first case was reported in 1984 (3). Herein, we report a case of lipid-rich carcinoma occurring in a 53-year-old female patient, and the literature is reviewed.     

A sero-epidemiological survey of Chinese Babesia motasi for small ruminants in China

Babesia motasi BQ1 (Lintan) was first isolated from Haemaphysalis qinghaiensis collected in Gannan Tibet Autonomous Region, Gansu province in April 2000. In this study, a total of 3,204 serum samples from small ruminants in 22 provinces located in different districts of China were tested for antibodies against merozoite antigens from cultured B. motasi BQ1 (Lintan) by enzyme-linked immunosorbent assay. This method can survey the prevalence of low-pathogenic Chinese B. motasi. The results of this survey indicated that the average positive rate was 43.5 %, and the positive rates of investigated provinces were significantly different from 6.1 to 91.0 %, and the infections had been found in all provinces investigated. Our data provide large important information regarding the current sero-prevalence of B. motasi in China.     

Emotion,cognitive load and learning outcomes during simulation training

Medical Education 2012: 46 : 1055–1062 CONTEXT Simulation training has emerged as an effective way to complement clinical training of medical students. Yet outcomes from simulation training must be considered suboptimal when 25–30% of students fail to recognise a cardiac murmur on which they were trained 1 hour previously. There are several possible explanations for failure to improve following simulation training, which include the impact of heightened emotions on learning and cognitive overload caused by interactivity with high‐fidelity simulators. This study was conducted to assess emotion during simulation training and to explore the relationships between emotion and cognitive load, and diagnostic performance. METHODS We trained 84 Year 1 medical students on a scenario of chest pain caused by symptomatic aortic stenosis. After training, students were asked to rate their emotional state and cognitive load. We then provided training on a dyspnoea scenario before asking participants to diagnose the murmur in which they had been trained (aortic stenosis) and a novel murmur (mitral regurgitation). We used factor analysis to identify the principal components of emotion, and then studied the associations between these components of emotion and cognitive load and diagnostic performance. RESULTS We identified two principal components of emotion, which we felt represented invigoration and tranquillity. Both of these were associated with cognitive load with adjusted regression coefficients of 0.63 (95% confidence interval [CI] 0.28–0.99; p = 0.001) and ? 0.44 (95% CI ? 0.77 to ? 0.10; p = 0.009), respectively. We found a significant negative association between cognitive load and the odds of subsequently identifying the trained murmur (odds ratio 0.27, 95% CI 0.11–0.67; p = 0.004). CONCLUSIONS We found that increased invigoration and reduced tranquillity during simulation training were associated with increased cognitive load, and that the likelihood of correctly identifying a trained murmur declined with increasing cognitive load. Further studies are needed to evaluate the impact on performance of strategies to alter emotion and cognitive load during simulation training.     

Usefulness of a Three‐Dimensional‐Printed Model in the Treatment of Irreducible Atlantoaxial Dislocation with Transoral Atlantoaxial Reduction Plate

ObjectiveTo evaluate the usefulness of a 3D‐printed model for transoral atlantoaxial reduction plate (TARP) surgery in the treatment of irreducible atlantoaxial dislocation (IAAD).MethodsA retrospective review was conducted of 23 patients (13 men, 10 women; mean age 58.17 ± 5.27 years) with IAAD who underwent TARP from January 2015 to July 2017. Patients were divided into a 3D group (12 patients) and a non‐3D group (11 patients). A preoperative simulation process was undertaken for the patients in the 3D group, with preselection of the TARP system using a 3D‐printed 1:1 scale model, while only imaging data was used for the non‐3D group. Complications, clinical outcomes (Japanese Orthopaedic Association [JOA] and visual analogue score [VAS]), and image measurements (atlas–dens interval [ADI], cervicomedullary angle [CMA], and clivus‐canal angle [CCA]) were noted preoperatively and at the last follow up.ResultsA total of 23 patients with a follow‐up time of 16.26 ± 4.27 months were included in the present study. The surgery duration, intraoperative blood loss, and fluoroscopy times in the 3D group were found to be shorter than those in non‐3D group, with statistical significance. The surgery duration was 3.29 ± 0.45 h in the 3D group and 4.68 ± 0.90 h in the non‐3D group, and the estimated intraoperative blood loss was 131.67 ± 43.03 mL in the 3D group and 185.45 ± 42.28 mL in the non‐3D group. No patients received blood transfusions. The intraoperative fluoroscopy times were 5.67 ± 0.89 in the 3D group and 7.91 ± 1.45 in the non‐3D group. Preoperatively and at last follow up, JOA and VAS scores and ADI, CCA, and CMA were improved significantly within the two groups. However, no statistical difference was observed between the two groups. However, surgical site infection occurred in 1 patient in the 3D group, who underwent an emergency revision operation of the removal of TARP device and posterior occipitocervical fixation; the patient recovered 2 weeks after the surgery. In 2 patients in the traditional group, a mistake occurred in the placement of screws, with no neurological symptoms related to the misplacement.ConclusionPreoperative surgical simulation using a 3D‐printed real‐size model is an intuitive and effective aid for TARP surgery for treating IAAD. The 3D‐printed biomodel precisely replicated patient‐specific anatomy for use in complicated craniovertebral junction surgery. The information was more useful than that available with 3D reconstructed images.