SHEAR BOND STRENGTH OF ORTHODONTIC BRACKETS TO ENAMEL UNDER DIFFERENT SURFACE TREATMENT CONDITIONS

The purpose of the present study was to evaluate the shear bond strength to enamel and the adhesive remnant index (ARI) of both metallic and polycarbonate brackets bonded under different conditions. Ninety bovine permanent mandibular incisors were embedded in acrylic resin using PVC rings as molds and assigned to 6 groups (n=15). In Groups 1 (control) and 3, metallic and polycarbonate orthodontic brackets were, respectively, bonded to the enamel surfaces using Transbond XT composite according to the manufacturer''s recommendations. In Groups 2 and 4, both types of brackets were bonded to enamel with Transbond XT composite, but XT primer was replaced by the OrthoPrimer agent. In Groups 5 and 6, the polycarbonate bracket bases were sandblasted with 50-μm aluminum-oxide particle stream and bonded to the enamel surfaces prepared under the same conditions described in Groups 3 and 4, respectively. After bonding, the specimens were stored in distilled water at 37°C for 24 hours and then submitted to shear bond strength test at a crosshead speed of 0.5 mm/min. The results (MPa) showed no statistically significant difference between Groups 4 and 6 (p>0.05). Likewise, no statistically significant differences (p>0.05) were found among Groups 1, 2, and 5, although their results were significantly lower than those of Groups 4 and 6 (p<0.05). Group 3 had statistically significant lower bond strength than Groups 2, 4, and 6, but no statistically significant differences were found on comparison to Groups 1 and 5. A larger number of fractures at the bracket/composite interface were evidenced by the ARI scores. OrthoPrimer bonding agent yielded higher bond strength in the groups using either conventional or sandblasted polycarbonate brackets, which was not observed in the groups using metallic brackets.     

Single-bottle adhesives behave as permeable membranes after polymerisation. II. Differential permeability reduction with an oxalate desensitiser

OBJECTIVES: This study examined the changes in hydraulic conductance and ultrastructure of dentine bonded with simplified etch-and-rinse adhesives to oxalate desensitiser pre-treated acid-etched dentine. METHODS: Human dentine disks were acid-etched, treated with an oxalate desensitiser (BisBlock, Bisco), and bonded with One-Step (OS), Single Bond (SB), OptiBond Solo Plus (OB) or Prime and Bond NT (PB). Similar disks from each group were acid-etched, and bonded without oxalate pre-treatment. Hydraulic conductance of the specimens was measured at 20 cm of water pressure and analysed with nonparametric statistical methods. Epoxy resin replicas of the smear layer-covered dentine and bonded dentine were examined with SEM for the extent of fluid transudation. Specimens bonded under perfusion were examined with TEM after tracer immersion. RESULTS: OB and PB exhibited a highly significant reversal of the reduced hydraulic conductance obtained with BisBlock on unbonded acid-etched dentine. Profuse water transudation across the bonded dentine was observed from the replicas. Adhesive interfaces were covered with spherical globules that interfered with dentine hybridization. Conversely, no significant difference in hydraulic conductance was observed in SB, between Bisblock pre-treated, unbonded and bonded acid-etched dentine. Significantly lower hydraulic conductance was shown on application of OS to Bisblock-treated acid-etched dentine. Water transudation was sparse, interfering surface globular structures were absent, and only angular subsurface crystals were seen in the dentinal tubules. CONCLUSIONS: Convective water fluxes through dentine may be reduced by applying Bisblock to acid-etched dentine before bonding with One-Step or Single Bond. However, reducing adhesive permeability with the use of oxalate desensitiser is not applicable to low acidity adhesives such as OptiBond Solo Plus and Prime and Bond NT.     

Influence of season on prevalence of cleft lip and palate

According to the multifactorial threshold (MFT) model, cleft lip and palate (CLP) result from the influence of exogenous and endogenous genetic factors. Based on nearly 1000 cases of cleft lip with or without cleft palate treated in the clinic for maxillofacial surgery of the Martin-Luther University Halle-Wittenberg during the period 1946-1995, we investigated the influence of season on the occurrence of this malformation. Seasons of the year reflect various exogenous factors that may be accessible to prevention. The calculated date of conception served as comparison value between the study group and controls. The clefts of type III (CLP; P = 0.48), isolated CP (P = 0.933) or male patients with clefts of type I showed no significant deviation from the distribution in the control group over the year. We proved a significant maximum in spring, summer and autumn and a minimum in winter for the conception date of female patients with type I clefts (P = 0.033, relative risk = 2.6). Some of the seasonal factors implicated in the aetiology that play a role in the development of clefts could be:     

Ex vivo biocompatibility tests of regular and white forms of mineral trioxide aggregate

AIM: To examine the genotoxicity and cytotoxicity of regular and white mineral trioxide aggregate (MTA) ex vivo by the single-cell gel (comet) assay and trypan blue exclusion test, respectively. METHODOLOGY: Aliquots of 1 x 10(4) Chinese hamster ovary cells were incubated at 37 degrees C for 3 h with grey and white forms of MTA at final concentrations ranging from 1 to 1,000 microg mL(-1). The negative control group was treated with vehicle control phosphate buffer solution for 3 h at 37 degrees C and the positive control group was treated with methyl metasulfonate (at 1 microg mL(-1)) for 1 h at 37 degrees C. After incubation, the cells were centrifuged at 180 g for 5 min and washed twice with fresh medium and resuspended with fresh medium. Each individual treatment was repeated three times consecutively to ensure reproducibility. Parameters from single-cell gel (comet) and cytotoxicity assays were assessed by the Kruskal-Wallis nonparametric test. RESULTS: Neither compounds produced genotoxic effects with respect to the single-cell gel (comet) assay in all concentrations evaluated. In the same way, the dose-response relationships of all compounds tested at concentrations ranging from 1 to 1,000 microg mL(-1) on cell viability assessed by the trypan blue assay displayed no statistically significant differences (P > 0.05) for either endodontic material. CONCLUSIONS: Regular (grey) and white MTA are not genotoxins and do not induce cellular death.     

A 10-year comparative study of the incidence of third molar removal in the aging population.

PURPOSE: The study goal was to evaluate the incidence of patients older than 40 years who required third molar removal. PATIENTS AND METHODS: Two prospective 5-year studies were compared over a 10-year period of 1992 to 1997 and 1997 to 2002. The study was initiated to evaluate how the large increase in the older population with longer life expectancies is reflected in the third molar population. RESULTS: In 1997, 10.5% of patients requiring third molar surgery were 40 years or older. In 2002, 17.3% of patients were 40 years or older. CONCLUSIONS: It is well known that patients 40 years and older have increased risk in removal of third molars. It is concluded that 1 patient in 5 in the high-risk category is in a very high risk category. The risk to patients and to the profession can be dramatically reduced by considering early removal of abnormal third molars.     

Antimicrobial efficacy of medicated root canal filling materials

Bacteria remaining within the root canal system are a significant factor in endodontic failures. The aim of this in vitro study was to evaluate the antimicrobial efficacy of commercially available gutta-percha formulations against common endodontic pathogens. Standard, tetracycline, or iodoform (also called medicated gutta-percha; MGP) containing gutta-percha were tested against Actinomyces israelii, A. naeslundii, Enterococcus faecalis, and Fusobacterium nucleatum using the agar diffusion method. Resilon points and tetracycline disks/E-tests were used as negative and positive controls, respectively. Resilon did not display antimicrobial properties. Standard gutta-percha and MGP inhibited F. nucleatum and A. naeslundii, with MGP also inhibiting A. israelii. Tetracycline containing gutta-percha was found to inhibit growth from all four bacterial species tested. The results of this study suggest that the use of tetracycline containing gutta-percha as an obturation material may be useful as a complement to the cleaning and disinfection phase of root canal procedures.     

An In Vitro Investigation of a Comparison of Bond Strengths of Composite to Etched and Air-Abraded Human Enamel Surfaces

PURPOSE: The purposes of the study were to measure the tensile bond strength of composite resin to human enamel specimens that had been either etched or air-abraded, and to compare the quality of the marginal seal, through the assessment of microleakage, of composite resin to human enamel specimens that had been either etched or air-abraded. MATERIALS AND METHODS: Thirty mandibular molar teeth were decoronated and sectioned mesio-distally to produce six groups, each containing ten specimens that were embedded in acrylic resin using a jig. In each of the four treatment groups, the specimen surfaces were treated by either abrasion with 27 or 50 microm alumina at 4 mm or 20 mm distance, and a composite resin was bonded to the treated surfaces in a standardized manner. In the two control groups the specimens were treated with 15 seconds exposure to 36% phosphoric acid gel and then similarly treated before being stored in sterile water for 1 week. All specimens were then subjected to tensile bond strength testing at either 1 or 5 mm/min crosshead speed. For the microleakage study, the degree of dye penetration was measured 32 times for each treatment group, using a neutral methylene blue dye at the interface between composite and either 27 or 50 microm air-abraded tooth structure or etched enamel surfaces. RESULTS: The mean bond strength values recorded for Group 1 (phosphoric acid etch, 5 mm/min crosshead speed) was 25.4 MPa; Group 2 (phosphoric acid etch, 1 mm/min), 22.2 MPa; Group 3 (27 microm alumina at 4 mm distance), 16.8 MPa; Group 4 (50 microm alumina at 4 mm distance), 16.9 MPa; Group 5 (27 microm alumina at 20 mm distance), 4.2 MPa; and for Group 6 (50 microm alumina at 20 mm distance) 3.4 MPa. An analysis of variance (ANOVA) demonstrated significant differences among the groups, and a multiple comparison test (Tukey) demonstrated that conventionally etched specimens had a greater bond strength than air-abraded specimen groups. No significant difference in dye penetration could be demonstrated among the groups (p= 0.58). CONCLUSIONS: Composite resin applied to enamel surfaces prepared using an acid etch procedure exhibited higher bond strengths than those prepared with air abrasion technology. The abrasion particle size did not affect the bond strength produced, but the latter was adversely affected by the distance of the air abrasion nozzle from the enamel surface. The crosshead speed of the bond testing apparatus had no effect on the bond strengths recorded. The marginal seal of composite to prepared enamel was unaffected by the method of enamel preparation.     

Palatal neurofibroma associated with localized periodontitis

BACKGROUND: Neurofibromatosis type 1 (NF1) is the most common form of neurofibromatosis. While typically considered a dermatologic disorder, intraoral signs of neurofibromatosis occur quite commonly. This clinical entity can be confused with periodontitis because of the presence of periodontal pockets. In this report, we present the case of a palatal neurofibroma with radiographic involvement in a patient with NF1. METHODS: A 40-year-old female patient was referred from her general dentist to evaluate advanced periodontitis in the maxillary left quadrant. The patient's medical history was significant for a soft tissue lesion excised from her back 11 years previously and diagnosed as a neurofibroma. Subsequent medical examination at that time confirmed a systemic diagnosis of NF1. A comprehensive periodontal evaluation was performed, and panoramic and periapical radiographs were taken. Teeth were tested for vitality. An incisional biopsy was completed for histopathologic examination. RESULTS: The periodontal evaluation revealed the presence of 6 to 9 mm probing depths adjacent to teeth #14 and #15. Panoramic and periapical radiographs showed a circumscribed 0.8x0.9-cm unilocular radiolucency superimposed over the root of tooth #13 and extensive horizontal bone loss on the distal side of #15. Incisional biopsy confirmed the presence of a neurofibroma, and because of the extent of the lesion, the patient was referred to the Oral and Maxillofacial Surgery service for complete excision. CONCLUSIONS: Neurofibromas can cause extensive destruction of alveolar bone, mimicking periodontitis. Due to the potential systemic and genetic implications, the diagnosis of neurofibroma requires appropriate medical referral.