Comparison of static and dynamic computer-assisted guidance methods in implantology

The planning of dental implant position and its transfer to the operation site can be considered as one of the most important factors for the long-term success of implant-supported prosthetic and epithetic restorations. This study compares computer-assisted fabricated surgical templates as the static method with intro-operative image guided navigation as the dynamic method for transfer of three-dimensional pre-operative planning. For the static method, the systems Med3D, coDiagnostix/ gonyX, and SimPlant were used. For the dynamic method, the systems RoboDent und VectorVision2 were applied. A total of 746 implants were inserted between August 1999 and December 2005 in 206 patients. The static approach was used most frequently, accounting for 611 fixtures in 168 patients. The failure ratios within the first 6 months were 1.31% in the statically controlled insertion group compared to 2.96% in the dynamically controlled insertion group. Complications related to an incorrect position of the implants have not been observed so far in either group. All computer-assisted methods included in this study were successfully applied in a clinical setting after a certain start-up period. The indications for application of computer-assisted methods in implantology are currently given in difficult anatomical situations. Due to uncomplicated handling and low resource demands, the static template technique can be recommended as the method of choice for the majority of all cases falling into this category.     

The effect of simvastatin on remodelling of the alveolar bone following tooth extraction

Suppression of residual ridge resorption after tooth extraction is a hot spot in dental research. Recently, simvastatin was reported to influence bone turnover by stimulating bone formation. In this study, the effect of simvastatin application on residual ridge resorption following tooth extraction was investigated. Sixty male Wistar rats were randomly divided into experimental and control groups (n=30). Polylactic acid/polyglycolic acid copolymer carriers, with or without simvastatin, were implanted into extraction sockets of right mandibular incisors. The rats were killed at 1, 2, 4, 8 or 12 weeks after implantation. The relative height of the residual alveolar ridge was significantly greater in the experimental compared to the control group at 2, 4, 8 and 12 weeks. The bone mineral density in the experimental group was significantly higher than that in the control group at 4, 8 and 12 weeks. A larger newly formed bone island was observed in the experimental group at 4 weeks, and higher bone formation rate and quality were found than in the control group at different time points except 1 week. The findings indicate that local application of simvastatin would effectively preserve the residual alveolar bone by promoting bone formation in the extraction socket.     

A newly developed method for taking pictures of tooth crown cracks for clinical records

It is very important to examine fine cracks on the crown surface of traumatized tooth in the dental clinic because the presence of these cracks may cause discomfort or hypersensitivity of the tooth. By the emission of routinely used light, it is difficult to illuminate cracks, and the usual intraoral photography using strobe light emission is not useful to make records of cracks in most cases. In the present study, a method for taking pictures to record tooth crown cracks was newly developed using LED as a light source, and applied to patients with traumatized teeth in the dental clinic. The results were as follows: 1. Cracks on the tooth surface could be confirmed with the LEDs of all the colors used in this study. However, the blue LED enabled cracks in the incisal edge part to be more easily confirmed, and the white LED enabled cracks in the cervical part to be more easily confirmed. 2. Cracks of multiple modalities on the tooth surface was illuminated more often when the LED light was emitted at 45 degrees to the axis of the tooth than 90 degrees. 3. The light exposure field became wider by the use of the LED of diameter 5 mm than that of diameter 3 mm. However, the LED of diameter 3 mm was more favorable than that of diameter 5 mm for the observation of the cracks because the former could more easily change the direction of light emission.     

Sinus augmentation for single-tooth replacement in the posterior maxilla: a 3-year follow-up clinical report

A technique for single-tooth sinus lift and simultaneous implant placement in the posterior maxilla is presented. Ten hydroxyapatite-coated cylindric implants, 13 to 15 mm in length, were placed together with a composite bone graft of demineralized freeze-dried bone allograft and autogenous bone in 10 adults. Surgical technique and anatomic considerations are discussed. Follow-up of 3 years showed successful function and no cervical bone loss in all patients.     

Local dexamethasone improves periodontal healing of replanted dogs' teeth

Abstract— The purpose of the present investigation was to evaluate histologically the effect of dexamethasone on root resorption in stored and replanted dogs' teeth. Twenty-nine roots from three beagle dogs were endodontically treated to prevent subsequent inflammatory root resorption of pulpal origin. The teeth were extracted and randomly assigned to three groups for 18-h storage. Group 1: control group teeth ( n = 13) were stored in vials containing ViaSpan only; Group 2: topical treatment teeth ( n =10) were stored in vials containing ViaSpan and dexamethasone (16 μg/ml); and Group 3: systemic treatment teeth ( n =6) were stored in bids containing ViaSpan without any additives. Dexamethasone was administered intramuscularly (0.5 mg/kg body weight) 2 days prior to, on the day of, and every other day after extraction and replantation for two administrations. After 12 weeks, the dogs were sacrificed, and the teeth histologically prepared and evaluated according to the analysis of Andreasen. Significant differences were found for complete healing ( P= 0.0583) and inflammatory root resorption ( P= 0.0568) but not for replacement resorption ( P= 0.1952). In addition, comparing local to systemic administration of dexamethasone (Group 2 vs. Group 3), statistically significant differences were found for healing, 85% (Group 2) vs. 67% (Group 3) ( P =0.0125) and inflammatory root resorption, 13% (Group 2) vs. 28% (Group 3) ( P =0.0126). This study indicated that topical use of dexamethasone enhances healing and results in fewer resorption complications.     

Epithelial-connective tissue interaction on the tooth surface: An in vitro model

In the present study, and in vitro system was developed and designed to examine the interaction between gingival fibroblasts (GF) and epithelial cells (EC) on the tooth surface. Porcine roots were cut transversely into 300 microns-thick root slices (RS). Gingival explants were placed on the upper RS surface and cultured in a defined medium permissive for the growth of EC. After 4 or 6 days, RS yielding EC were transferred onto confluent cultures of GF and further co-cultured for either 4 or 8 d. Cultures were then fixed and examined by SEM. The upper RS surfaces and the upper half of their peripheral aspect were covered by EC. The lower half of the peripheral RS surfaces were populated by GF originating from the confluent culture of GF. EC and GF made contact at approximately the middle of the side of the root slice. In cultures of epithelial components grown in defined medium for either 4 or 6 d and harvested 4 d after assembling the system, the EC-GF junction was located 117 +/- 45 and 271 +/- 82 microns, respectively from the upper RS aspect. Extending the co-culture period did not affect the EC-GF junction location. These results indicate that GF-EC contact stops the migration of these cells on root surfaces in vitro. The described system should be valuable for studying cellular events that may affect the formation of a new dentogingival junction following surgical periodontal therapy.     

口腔环境因素对血型链球菌和变形链球菌生长的影响：I.粘蛋白的影响

采用连续培养方法，以粘蛋白作为化学限定培养基中的限定性因子，观察血型链球菌（以下简称血链菌）和变形链球菌（以下简称变链菌）Ｉｎｇｂｒｉｔｔ（ｃ）的生长状态。结果显示变链菌不能生长于以粘蛋白作为唯一营养源的培养基中，而血链菌可以生长；两菌混合培养时的生长量均有所提高，表明两菌有协同降解粘蛋白作用。     

Apical extrusion of intracanal bacteria following use of two engine-driven instrumentation techniques

AIM: To evaluate the number of bacteria extruded apically from extracted teeth ex vivo after canal instrumentation using the two engine-driven techniques utilizing nickel-titanium instruments (ProTaper and System GT). METHODOLOGY: Forty extracted single-rooted human mandibular premolar teeth were used. Access cavities were prepared and root canals were then contaminated with a suspension of Enterococcus faecalis and dried. The contaminated roots were divided into two experimental groups of 15 teeth each and one control group of 10 teeth. Group 1, ProTaper group: the root canals were instrumented using ProTaper instruments. Group 2, System GT group: the root canals were instrumented using System GT instruments. Group 3, control group: no instrumentation was attempted. Bacteria extruded from the apical foramen during instrumentation were collected into vials. The microbiological samples from the vials were incubated in culture media for 24 h. Colonies of bacteria were counted and the results were given as number of colony-forming units. The data obtained were analysed using the Kruskal-Wallis one-way analysis of variance and Mann-Whitney U-tests, with alpha = 0.05 as the level for statistical significance. RESULTS: There was no significant difference as to the number of extruded bacteria between the ProTaper and System GT engine-driven systems (P > 0.05). CONCLUSIONS: Both engine-driven nickel-titanium systems extruded bacteria through the apical foramen.